River Ryburn

Summary

The River Ryburn is a river in West Yorkshire, England. It flows through the villages of Rishworth, Ripponden and Triangle before flowing into the River Calder at Sowerby Bridge.

River Ryburn
River Ryburn With Slitheroe Bridge hidden in the trees, this bridge carries the A672 over the river.
53°39′55.77″N 1°56′56.8″W / 53.6654917°N 1.949111°W / 53.6654917; -1.949111
Location
CountryEngland
Physical characteristics
Source 
 • locationConfluence of rag sapling clough and Black Castle Clough nr Rishworth
 • coordinates53°39′35″N 2°1′29″W / 53.65972°N 2.02472°W / 53.65972; -2.02472
 • elevation361 metres (1,184 ft)
Mouth 
 • location
River Calder at Sowerby Bridge
 • coordinates
53°42′28″N 1°54′42″W / 53.70778°N 1.91167°W / 53.70778; -1.91167
 • elevation
80 metres (260 ft)
Length11.4 kilometres (7.1 mi)
Basin size13 square kilometres (5.0 sq mi)

Course edit

The river becomes known as Ryburn at the confluence of Rag Sapling Clough and Black Castle Clough to the east of Blackstone Edge Reservoir. It flows east parallel to the A58 Rochdale Road into Baitings reservoir. It emerges from the east end of the reservoir for a short time before flowing into Ryburn Reservoir. The river flows out of the east end of the reservoir just to the north of the village of Rishworth, before turning north east and flowing through Ripponden. After leaving the town, it flows north to Triangle before turning north east again, flowing through Sowerby Bridge and joining the River Calder.

History edit

The bridge on the B6113, Elland Road, in Ripponden was once part of the Elland Turnpike in 1815. It was originally built in 1772 and widened and altered in the nineteenth century. Next to this bridge is the original Ripponden Old Bridge which has been around since at least 1313.[1]

Baitings and Ryburn reservoirs were built for Wakefield Corporation. Baitings was opened on 14 November 1956 after eight years' work and a cost of £1.4 million. It is 64 acres (26 ha) large with a volume of 775 million gallons (3.5 million cubic metres), reaching a depth of 155 feet (47 m). The dam at the east end of the reservoir is 1,550 feet (470 m) across and 185 feet (56 m) high. At low water levels, the old road and bridge become visible.[2] Ryburn Reservoir was the first to be opened on 7 September 1933 after eight years' construction at a cost of £240,000. The dam at the east end of the reservoir is approximately 100 feet (30 m) high. It has a volume of 220 million gallons (1 million cubic metres) and covers 26 acres (11 ha), which includes the submerged village of Bogden.[1]

Local landowner John Rawson (1813–1899) was responsible for the planting of much of the woodland along the River Ryburn valley.[1]

Lists edit

Gallery edit

Sources edit

  • Ordnance Survey Open Viewer https://www.ordnancesurvey.co.uk/business-government/tools-support/open-data-support
  • Google Earth
  • National Environment Research Council - Centre for Ecology and Hydrology http://www.ceh.ac.uk/index.html
  • Environment Agency http://www.environment-agency.gov.uk/

References edit

  1. ^ a b c "History". Retrieved 22 August 2011.
  2. ^ "Bridging the gap in Yorkshire between the past and present". The Yorkshire Post. 1 October 2018. Retrieved 16 July 2019.