|Preferred IUPAC name
3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||139.110 g·mol−1|
|Appearance||Colourless to pale yellow crystals|
|Melting point||113 to 114 °C (235 to 237 °F; 386 to 387 K)|
|Boiling point||279 °C (534 °F; 552 K)|
|10 g/L (15 °C)|
11.6 g/L (20 °C)
16 g/L (25 °C)
|Acidity (pKa)||7.15 (in water),|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
(what is ?)
4-Nitrophenol shows two polymorphs in the crystalline state. The alpha-form is colorless pillars, unstable at room temperature, and stable toward sunlight. The beta-form is yellow pillars, stable at room temperature, and gradually turns red upon irradiation of sunlight. Usually 4-nitrophenol exists as a mixture of these two forms.
|4-Nitrophenol (pH indicator)|
|below pH 5.4||above pH 7.5|
4-Nitrophenol can be used as a pH indicator. A solution of 4-nitrophenol appears colorless below pH 5.4 and yellow above pH 7.5. This color-changing property makes this compound useful as a pH indicator. The yellow color of the 4-nitrophenolate form (or 4-nitrophenoxide) is due to a maximum of absorbance at 405 nm (ε = 18.3 to 18.4 mM−1 cm−1 in strong alkali). In contrast, 4-nitrophenol has a weak absorbance at 405 nm (ε = 0.2 mM−1 cm−1). The isosbestic point for 4-nitrophenol/4-nitrophenoxide is at 348 nm, with ε = 5.4 mM−1 cm−1.
4-Nitrophenol is a product of the enzymatic cleavage of several synthetic substrates such as 4-nitrophenyl phosphate (used as a substrate for alkaline phosphatase), 4-nitrophenyl acetate (for carbonic anhydrase), 4-nitrophenyl-β-D-glucopyranoside and other sugar derivatives which are used to assay various glycosidase enzymes. Amounts of 4-nitrophenol produced by a particular enzyme in the presence of its corresponding substrate can be measured with a spectrophotometer at or around 405 nm and used as a proxy measurement for the amount of the enzyme activity in the sample.
Accurate measurement of enzyme activity requires that the 4-nitrophenol product is fully deprotonated, existing as 4-nitrophenolate, given the weak absorbance of 4-nitrophenol at 405 nm. Complete ionization of the alcohol functional group affects the conjugation of the pi bonds on the compound. A lone pair from the oxygen can be delocalized via conjugation to the benzene ring and nitro group. Since the length of conjugated systems affects the color of organic compounds, this ionization change causes the 4-nitrophenol to turn yellow when fully deprotonated and existing as 4-nitrophenolate.
A common mistake in measuring enzyme activity using these substrates is to perform the assays at neutral or acidic pH without considering that only part of the chromophoric product is ionized. The problem can be overcome by stopping the reaction with sodium hydroxide (NaOH) or other strong base, which converts all product into 4-nitrophenoxide; final pH must be > ca. 9.2 to ensure more than 99% of the product is ionised. Alternatively enzyme activity can be measured at 348 nm, the isosbestic point for 4-nitrophenol/4-nitrophenoxide.
4-Nitrophenol irritates the eyes, skin, and respiratory tract. It may also cause inflammation of those parts. It has a delayed interaction with blood and forms methaemoglobin which is responsible for methemoglobinemia, potentially causing cyanosis, confusion, and unconsciousness. When ingested, it causes abdominal pain and vomiting. Prolonged contact with skin may cause allergic response. Genotoxicity and carcinogenicity of 4-nitrophenol are not known. The LD50 in mice is 282 mg/kg and in rats is 202 mg/kg (p.o.).
Only one name is retained, phenol, for C6H5-OH, both as a preferred name and for general nomenclature. The structure is substitutable at any position. Locants 2, 3, and 4 are recommended, not o, m, and p.