3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||175.324 g/mol|
|Appearance||white cubic crystals|
|Melting point||1,368 °C (2,494 °F; 1,641 K) |
|Boiling point||2,260 °C (4,100 °F; 2,530 K) |
|1.58 g/L (10 °C)|
1.61 g/L (25 °C)
Solubility product (Ksp)
|1.84 × 10−7|
|Solubility||soluble in methanol, ethanol|
|Thermal conductivity||10.9 W/(m·K)|
Refractive index (nD)
|1.557 (200 nm)|
1.4744 (589 nm)
1.4014 (10 µm)
|Fluorite (cubic), cF12|
|Fm3m, No. 225|
a = 0.62 nm
Formula units (Z)
Heat capacity (C)
Std enthalpy of
Gibbs free energy (ΔfG˚)
|Occupational safety and health (OHS/OSH):|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
|250 mg/kg, oral (rat)|
|Safety data sheet (SDS)||PubChem|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|(what is ?)|
Barium fluoride (BaF2) is an inorganic compound with the formula BaF2. It is a colorless solid that occurs in nature as the rare mineral frankdicksonite. Under standard conditions it adopts the fluorite structure and at high pressure the PbCl2 structure. Like CaF2, it is resilient to and insoluble in water.
Above ca. 500 °C, BaF2 is corroded by moisture, but in dry environments it can be used up to 800 °C. Prolonged exposure to moisture degrades transmission in the vacuum UV range. It is less resistant to water than calcium fluoride, but it is the most resistant of all the optical fluorides to high-energy radiation, though its far ultraviolet transmittance is lower than that of the other fluorides. It is quite hard, very sensitive to thermal shock and fractures quite easily.
Barium fluoride is transparent from the ultraviolet to the infrared, from 150–200 nm to 11–11.5 µm. It is used in windows for infrared spectroscopy, in particular in the field of fuel oil analysis. Its transmittance at 200 nm is relatively low (0.60), but at 500 nm it goes up to 0.96–0.97 and stays at that level until 9 µm, then it starts falling off (0.85 for 10 µm and 0.42 for 12 µm). The refractive index is about 1.46 from 700 nm to 5 µm.
Barium fluoride is also a common, very fast (one of the fastest) scintillators for the detection of X-rays, gamma rays or other high energy particles. One of its applications is the detection of 511 keV gamma photons in positron emission tomography. It responds also to alpha and beta particles, but, unlike most scintillators, it does not emit ultraviolet light. It can be also used for detection of high-energy (10–150 MeV) neutrons, using pulse shape discrimination techniques to separate them from simultaneously occurring gamma photons.
Barium fluoride is used as a preopacifying agent and in enamel and glazing frits production. Its other use is in the production of welding agents (an additive to some fluxes, a component of coatings for welding rods and in welding powders). It is also used in metallurgy, as a molten bath for refining aluminium.
In the vapor phase the BaF2 molecule is non-linear with an F-Ba-F angle of approximately 108°. Its nonlinearity violates VSEPR theory. Ab initio calculations indicate that contributions from d orbitals in the shell below the valence shell are responsible. Another proposal is that polarisation of the electron core of the barium atom creates an approximately tetrahedral distribution of charge that interacts with the Ba-F bonds.