Bavarian A III

Summary

The Bavarian A III 2-2-2 engines were German steam locomotives in service with the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn).

Bavarian A III
Type and origin
BuilderMaffei
Build date1851-1852
Total produced4
Specifications
Configuration:
 • Whyte2-2-2
Gauge1,435 mm (4 ft 8+12 in)
Leading dia.915 mm (3 ft 0 in)
Driver dia.1,425 mm (4 ft 8+18 in)
Trailing dia.915 mm (3 ft 0 in)
Length:
 • Over beams11,290 mm (37 ft 12 in)
Service weight21.8 t (21.5 long tons; 24.0 short tons)
Water cap.4.2 or 5.0 m3 (920 or 1,100 imp gal; 1,100 or 1,300 US gal)
Boiler pressure6 kgf/cm2 (588 kPa; 85.3 lbf/in2)
Heating surface:
 • Firebox0.98 m2 (10.5 sq ft)
 • Evaporative60.81 m2 (654.6 sq ft)
Cylinders2
Cylinder size356 mm (14 in)
Piston stroke559 mm (22 in)
Performance figures
Maximum speed50 km/h (31 mph)
Career
NumbersNames and inventory nos.
Retiredby 1871 (converted)

Once again these engines were used to experiment with a short boiler and Meyer expansion valve gear. Because the additional increase in size of the heating area could not be improved by installing extra tubes, two of each were rebuilt to 0-4-2 and 0-6-2 locomotives. Otherwise their construction was the same as the Class A II engines.

They were equipped with 2 T 4.2 and, following the rebuild, 2 T 5 tenders.

See also edit