|Country of origin||Soviet Union|
|Used on||N-1, Proton and Zenit-3|
|Height||6.28 m (20.6 ft)|
|Diameter||3.70 m (12.1 ft)|
|Gross mass||17,360 kg (38,270 lb)|
|Propellant mass||15,220 kg (33,550 lb)|
|Empty mass||2,140 kg (4,720 lb)|
|Derived from||Blok D|
|Thrust||83.61 kN (18,800 lbf)|
|Specific impulse||363.5 s (3.565 km/s)|
|Burn time||630 seconds|
The stage (and its derivatives) has been included in more than 320 launched rockets as of 2015[update]. By 2002 its modification Blok DM had a 97% success rate in 218 flights since 1974, and 43 successful missions in 1997-2002.
The stage was developed in 1960s as the fifth stage ('Д' is the fifth letter in the Cyrillic alphabet) for the Soviet Moonshot N1 rocket. The stage first flew in March 1967 while testing Zond of the moonshot program system. During manned lunar flight Blok D would be used for mid-course corrections on the flight to the Moon, then to place the lunar orbiter and lander into a lunar orbit, and decelerate moon-lander out onto its landing trajectory.
Blok D was also included as fourth stage of Proton-K and as such flew on unmanned Soviet missions to Moon, Mars (Mars 3) and Venus. It was used in the Proton-K configuration of the rocket and is still in use in the newer Proton-M variant (along with the Briz-M).
Blok DM also flies as the third stage for the Zenit-3SL rocket, which is used by the Sea Launch project to launch geostationary satellites. In 2002 a Blok DM3 failed in the attempted launch of Astra 1K.
The stage uses liquid oxygen (LOX) and kerosene as propellants, and has one single-chamber RD-58 main engine. The LOX tank has a spherical shape; the kerosene tank is toroidal, inclined to 15 degrees for better fuel extraction, with the engine mounted in the center of torus. Tanks include the first pump stage for the engine; the main pump is mounted on the engine.
Blok D weighs 3.5 tons during liftoff, but some parts are jettisoned and the dry mass in space is 2.5 tons. It has 5.70 meters length and generates 83.300 kN thrust for 600 seconds burn time. Blok D was modified as Blok DM in 1974, with 11D-58S engine. The unit cost is $4 million.
RKK Energia, the company that created Blok D, used it as a platform for many modifications over many years for different purposes; for example, the main propulsion unit on Buran started as a modification of the Blok D.
|Variant||First flight||Last flight||Launches||Rockets||Remarks|
|Blok D-1||1978||1989||10||Proton-K||Mostly used for launches to Venus|
|Blok D-2||1988||1996||3||Proton-K||Launched Fobos 1, Fobos 2 and Mars 96|
|Blok D modification for Earth-based orbits|
|Used with Proton-M for GLONASS launches |
|Blok DM-2M||1994||2005||15||Proton-K||Enhanced payload thanks to the use of higher performance Syntin fuel instead of RG-1. Powered by the RD-58S engine.|
|Blok DM-03||2010||active||4||Proton-M||Intended as a replacement for Blok DM-2 and DM-SL/SLB, first flew in 2010, only used on Proton|
|Blok DM-5||1997||2002||2||Proton-K||Used for low Earth orbit launches with Arkas satellites|
|Blok DM1||1996||1996||1||Proton-K||Commercial Blok DM-2, only used for one launch, with Inmarsat-3 F2|
|Blok DM2||1997||2002||4||Proton-K||Commercial Blok DM-5, used for Iridium and INTEGRAL launches|
|Blok DM3||1996||2006||25||Proton-K||Commercial Blok DM-2M|
|Blok DM4||1997||1997||1||Proton-K||Commercial Blok DM-2M, only used to launch Telstar 5|
|Blok DM-SL||1999||active||36||Zenit-3SL||Used in Sea Launch missions, some flights use a version with stretched fuel tanks|
|Blok DM-SLB||2008||active||5||Zenit-3SLB||Used in Land Launch missions and other commercial Zenit-3SLB flights from Baikonur|