Capping inversion

Summary

A capping inversion is an elevated inversion layer that caps a convective planetary boundary layer.

A capping inversion limits the vertical development of clouds. In this image taken near Kreuzberg (Rhön), the inversion is below the top of the mountain tops.
Diagram showing the daily changes to the capping inversion on top of Earth's planetary boundary layer.

The boundary layer is the part of the atmosphere which is closest to the ground. Normally, the sun heats the ground, which in turn heats the air just above it. Thermals form when this warm air rises into the cold air (warm air is less dense than cold air), a process called convection. A convective layer such as this has the potential for cloud formation, since condensation occurs as the warm air rises and cools.

An inversion occurs when the normal temperature (warm air below, cold air above) profile is reversed, creating a stable configuration of dense, cold air sitting below lighter, warm air. An elevated inversion layer is thus a region of warm air above a region of cold air, but higher in the atmosphere (generally not touching the surface).

A capping inversion occurs when there is a boundary layer with a normal temperature profile (warm air rising into cooler air) and the layer above that is an inversion layer (cooler air below warm air). Cloud formation from the lower layer is "capped" by the inversion layer. Air stagnation may result from a capping inversion from diffusing from a region, increasing the concentration of pollutants and exacerbating poor air quality.[1] If the capping inversion layer or "cap" is too strong it will prevent thunderstorms from developing. A strong cap can result in foggy conditions.

However, if the air at the surface is unstable enough, strong updrafts can be forced through the capping inversion. This selective process of only allowing the strongest updrafts to form thunderstorms often results in outbreaks of severe weather. The role of capping inversions in bolstering the intensity of severe weather was realized in conceptual models that were developed by atmospheric science researchers in the late 1960s and had been recognized as a characteristic of tornado-producing airmasses as early as 1954.[2][3] In some severe weather events, this capping inversion can emerge when a warm and dry mixed layer originating over a high plateau moves over a cooler and moister airmass, forming an "elevated mixed layer" (EML).[4] EMLs can be found worldwide downwind of high terrain, such as over South Asia, eastern Australia, east of the Rocky Mountains in the central U.S. and northern Mexico, and east of the foothills of the Andes.[4][5]

See also

edit

References

edit
  1. ^ Bailey, Adriana; Chase, Thomas N.; Cassano, John J.; Noone, David (June 2011). "Changing Temperature Inversion Characteristics in the U.S. Southwest and Relationships to Large-Scale Atmospheric Circulation". Journal of Applied Meteorology and Climatology. 50 (6): 1307–1323. doi:10.1175/2011JAMC2584.1.  
  2. ^ Carlson, Toby N.; Farrell, Robert J. (1983). "The Lid Strength as an Aid in Predicting Severe Local Storms" (PDF). National Weather Digest. 8 (2). National Weather Association: 27–39. Retrieved 22 May 2022.
  3. ^ Banacos, Peter C.; Ekster, Michael L. (1 August 2010). "The Association of the Elevated Mixed Layer with Significant Severe Weather Events in the Northeastern United States*". Weather and Forecasting. 25 (4). American Meteorological Society: 1082–1102. Bibcode:2010WtFor..25.1082B. doi:10.1175/2010WAF2222363.1.  
  4. ^ a b Carlson, T. N.; Benjamin, S. G.; Forbes, G. S.; Li, Y-F. (July 1983). "Elevated Mixed Layers in the Regional Severe Storm Environment: Conceptual Model and Case Studies". Monthly Weather Review. 111 (7): 1453–1474. doi:10.1175/1520-0493(1983)111<1453:EMLITR>2.0.CO;2.  
  5. ^ Ribeiro, Bruno Z.; Bosart, Lance F. (January 2018). "Elevated Mixed Layers and Associated Severe Thunderstorm Environments in South and North America". Monthly Weather Review. 146 (1): 3–28. doi:10.1175/MWR-D-17-0121.1.  
edit
  • Capping Inversion - AMS Glossary of Meteorology
  • Capping Inversion - National Science Digital Library