Chloroacetic acid

Summary

Chloroacetic acid, industrially known as monochloroacetic acid (MCA), is the organochlorine compound with the formula ClCH2CO2H. This carboxylic acid is a useful building block in organic synthesis. It is a colorless solid. Related compounds are dichloroacetic acid and trichloroacetic acid.

Chloroacetic acid
Chloroacetic acid
Chloroacetic acid
Names
Preferred IUPAC name
Chloroacetic acid
Systematic IUPAC name
Chloroethanoic acid
Other names
2-Chloroacetic acid
2-Chloroethanoic acid
Identifiers
  • 79-11-8 checkY
3D model (JSmol)
  • Interactive image
3DMet
  • B02139
ChEBI
  • CHEBI:27869 checkY
ChEMBL
  • ChEMBL14090 checkY
ChemSpider
  • 10772140 checkY
ECHA InfoCard 100.001.072 Edit this at Wikidata
EC Number
  • 201-178-4
KEGG
  • D07677 checkY
  • C06755
  • 300
RTECS number
  • AF8575000
UNII
  • 5GD84Y125G checkY
  • DTXSID4020901 Edit this at Wikidata
  • InChI=1S/C2H3ClO2/c3-1-2(4)5/h1H2,(H,4,5) checkY
    Key: FOCAUTSVDIKZOP-UHFFFAOYSA-N checkY
  • InChI=1/C2H3ClO2/c3-1-2(4)5/h1H2,(H,4,5)
    Key: FOCAUTSVDIKZOP-UHFFFAOYAR
  • ClCC(O)=O
Properties
C2H3ClO2
Molar mass 94.49 g·mol−1
Appearance Colorless or white crystals
Density 1.58 g/cm3
Melting point 63 °C (145 °F; 336 K)
Boiling point 189.3 °C (372.7 °F; 462.4 K)
85.8 g/100 mL (25 °C)
Solubility Soluble in methanol, acetone, diethyl ether, benzene, chloroform, ethanol
log P 0.22
Vapor pressure 0.22 hPa
Acidity (pKa) 2.86[1]
−48.1×10−6 cm3/mol
1.4351 (55 °C)
Structure
Monoclinic
Thermochemistry
144.02 J/(K·mol)
−490.1 kJ/mol
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
alkylating agent
GHS labelling:
GHS05: CorrosiveGHS06: ToxicGHS09: Environmental hazard
Danger
H301, H311, H314, H331, H400
P260, P261, P264, P270, P271, P273, P280, P301+P310, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P311, P312, P321, P322, P330, P361, P363, P391, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
1
0
Flash point 126 °C (259 °F; 399 K)
470 °C (878 °F; 743 K)
Lethal dose or concentration (LD, LC):
76 mg/kg.[2]
Safety data sheet (SDS) External MSDS
Related compounds
Related compounds
2-Chloropropionic acid
Sodium chloroacetate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Production edit

Chloroacetic acid was first prepared (in impure form) by the French chemist Félix LeBlanc (1813–1886) in 1843 by chlorinating acetic acid in the presence of sunlight,[3] and in 1857 (in pure form) by the German chemist Reinhold Hoffmann (1831–1919) by refluxing glacial acetic acid in the presence of chlorine and sunlight,[4] and then by the French chemist Charles Adolphe Wurtz by hydrolysis of chloroacetyl chloride (ClCH2COCl), also in 1857.[5]

Chloroacetic acid is prepared industrially by two routes. The predominant method involves chlorination of acetic acid, with acetic anhydride as a catalyst:

H
3
C−COOH
+ Cl
2
ClH
2
C−COOH
+ HCl

This route suffers from the production of dichloroacetic acid and trichloroacetic acid as impurities, which are difficult to separate by distillation:

H
3
C−COOH
+ 2 Cl
2
Cl
2
HC−COOH
+ 2 HCl
H
3
C−COOH
+ 3 Cl
2
Cl
3
C−COOH
+ 3 HCl

The second method entails hydrolysis of trichloroethylene:

ClHC=CCl2 + 2 H
2
O
ClH
2
C−COOH
+ 2 HCl

The hydrolysis is conducted at 130–140 °C in a concentrated (at least 75%) solution of sulfuric acid. This method produces a highly pure product, unlike the halogenation route. However, the significant quantities of HCl released have led to the increased popularity of the halogenation route. Approximately 420,000 tonnes are produced globally per year.[2]

Uses and reactions edit

Most reactions take advantage of the high reactivity of the C–Cl bond.

In its largest-scale application, chloroacetic acid is used to prepare the thickening agent carboxymethyl cellulose and carboxymethyl starch.

Chloroacetic acid is also used in the production of phenoxy herbicides by etherification with chlorophenols. In this way 2-methyl-4-chlorophenoxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid, and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) are produced. It is the precursor to the herbicide glyphosate and dimethoate. Chloroacetic acid is converted to chloroacetyl chloride, a precursor to adrenaline (epinephrine). Displacement of chloride by sulfide gives thioglycolic acid, which is used as a stabilizer in PVC and a component in some cosmetics.[2]

Illustrative of its usefulness in organic chemistry is the O-alkylation of salicylaldehyde with chloroacetic acid, followed by decarboxylation of the resulting ether, producing benzofuran.[6][7]

Safety edit

 
Chloroacetic acid burns

Like other chloroacetic acids and related halocarbons, chloroacetic acid is a hazardous alkylating agent. The LD50 for rats is 76 mg/kg.[2]

It is classified as an extremely hazardous substance in the United States as defined in Section 302 of the U.S. Emergency Planning and Community Right-to-Know Act (42 U.S.C. 11002), and is subject to strict reporting requirements by facilities which produce, store, or use it in significant quantities.[8]

See also edit

References edit

  1. ^ Dippy, J. F. J.; Hughes, S. R. C.; Rozanski, A. (1959). "498. The dissociation constants of some symmetrically disubstituted succinic acids". Journal of the Chemical Society. 1959: 2492–2498. doi:10.1039/JR9590002492.
  2. ^ a b c d Koenig, G.; Lohmar, E.; Rupprich, N. (2005). "Chloroacetic Acids". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a06_537. ISBN 978-3527306732.
  3. ^ LeBlanc, Félix (1844) "Recherches sur les produits dérivés de l'éther acétique par l'action du chlore, et en particulier sur l'éther acétique perchloruré" (in French), Annales de Chimie et de Physique, 3rd series, 10 : 197–221 ; see especially p. 212.
  4. ^ Hoffmann, Reinhold (1857) "Ueber Monochloressigsäure" (in German) (On mono-chloroacetic acid), Annalen der Chemie und Pharmacie, 102 (1) : 1–20.
  5. ^ Wurtz, Adolphe (1857) "Note sur l'aldéhyde et sur le chlorure d'acétyle" (in French) (Note on aldehyde and on acetyl chloride), Annales de chimie et de physique, 3rd series, 49 : 58–62, see p. 61.
  6. ^ Burgstahler, A. W.; Worden, L. R. (1966). "Coumarone". Organic Syntheses. 46: 28. doi:10.15227/orgsyn.046.0028; Collected Volumes, vol. 5, p. 251..
  7. ^ Inglis, J. K. H. (1928). "Ethyl Cyanoacetate". Organic Syntheses. 8: 74. doi:10.15227/orgsyn.008.0074.
  8. ^ 40 C.F.R.: Appendix A to Part 355—The List of Extremely Hazardous Substances and Their Threshold Planning Quantities (PDF) (1 July 2008 ed.), Government Printing Office, archived from the original (PDF) on 25 February 2012, retrieved 29 October 2011

External links edit

  • "Monochloroacetic Acid". CABB. Archived from the original on 6 February 2015. Retrieved 6 February 2015.
  • "Monochloroacetic Acid". IPCS Inchem. Retrieved 20 May 2007.