Chromium(II) acetate

Summary

Chromium(II) acetate hydrate, also known as chromous acetate, is the coordination compound with the formula Cr2(CH3CO2)4(H2O)2. This formula is commonly abbreviated Cr2(OAc)4(H2O)2. This red-coloured compound features a quadruple bond. The preparation of chromous acetate once was a standard test of the synthetic skills of students due to its sensitivity to air and the dramatic colour changes that accompany its oxidation. It exists as the dihydrate and the anhydrous forms.

Chromium(II) acetate
Names
IUPAC name
Chromium(II) acetate hydrate
Other names
chromous acetate,
chromium diacetate,
chromium(II) ethanoate
Identifiers
  • 14976-80-8 checkY
3D model (JSmol)
  • Interactive image
ChemSpider
  • 107397 checkY
ECHA InfoCard 100.224.848 Edit this at Wikidata
  • 120304
RTECS number
  • AG3000000
UNII
  • H3FYF8441T checkY
  • DTXSID50890519 Edit this at Wikidata
  • InChI=1S/2C2H4O2.Cr/c2*1-2(3)4;/h2*1H3,(H,3,4);/q;;+2/p-2 checkY
    Key: LRCIYVMVWAMTKX-UHFFFAOYSA-L checkY
  • InChI=1/2C2H4O2.Cr/c2*1-2(3)4;/h2*1H3,(H,3,4);/q;;+2/p-2
    Key: LRCIYVMVWAMTKX-NUQVWONBAT
  • [Cr+2]1234([OH2])#[Cr+2]([OH2])(O[C-](C)O1)(O[C-](C)O2)(O(C)[C-]O3)O(C)[C-]O4
Properties
C8H16Cr2O10
Molar mass 376.198 g·mol−1
Appearance brick-red solid
Density 1.79 g/cm3
Melting point dehydrates
soluble in hot water, MeOH
-5104.0·10−6 cm3/mol
Structure
monoclinic
octahedral
counting the Cr–Cr bond
0 D
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
could react exothermically in air
Related compounds
Related compounds
Rh2(OAc)4(H2O)2
Cu2(OAc)4(H2O)2, molybdenum(II) acetate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references

Cr2(OAc)4(H2O)2 is a reddish diamagnetic powder, although diamond-shaped tabular crystals can be grown. Consistent with the fact that it is nonionic, Cr2(OAc)4(H2O)2 exhibits poor solubility in water and methanol.

Chromium(II) acetate (aqueous solution)

Structure edit

The Cr2(OAc)4(H2O)2 molecule contains two atoms of chromium, two ligated molecules of water, and four acetate bridging ligands. The coordination environment around each chromium atom consists of four oxygen atoms (one from each acetate ligand) in a square, one water molecule (in an axial position), and the other chromium atom (opposite the water molecule), giving each chromium centre an octahedral geometry. The chromium atoms are joined by a quadruple bond, and the molecule has D4h symmetry (ignoring the position of the hydrogen atoms). The same basic structure is adopted by Rh2(OAc)4(H2O)2 and Cu2(OAc)4(H2O)2, although these species do not have such short M–M contacts.[1]

The quadruple bond between the two chromium atoms arises from the overlap of four d-orbitals on each metal with the same orbitals on the other metal: the dz2 orbitals overlap to give a sigma bonding component, the dxz and dyz orbitals overlap to give two pi bonding components, and the dxy orbitals give a delta bond. This quadruple bond is also confirmed by the low magnetic moment and short intermolecular distance between the two atoms of 236.2 ± 0.1 pm. The Cr–Cr distances are even shorter, 184 pm being the record, when the axial ligand is absent or the carboxylate is replaced with isoelectronic nitrogenous ligands.[2]

History edit

Eugène-Melchior Péligot first reported a chromium(II) acetate in 1844. His material was apparently the dimeric Cr2(OAc)4(H2O)2.[3][4] The unusual structure, as well as that of copper(II) acetate, was uncovered in 1951.[5]

Preparation edit

The preparation usually begins with reduction of an aqueous solution of a Cr(III) compound using zinc.[6] The resulting blue solution is treated with sodium acetate, which results in the rapid precipitation of chromous acetate as a bright red powder.

2 Cr3+ + Zn → 2 Cr2+ + Zn2+
2 Cr2+ + 4 OAc + 2 H2O → Cr2(OAc)4(H2O)2

The synthesis of Cr2(OAc)4(H2O)2 has been traditionally used to test the synthetic skills and patience of inorganic laboratory students in universities because the accidental introduction of a small amount of air into the apparatus is readily indicated by the discoloration of the otherwise bright red product.[7] The anhydrous form of chromium(II) acetate, and also related chromium(II) carboxylates, can be prepared from chromocene:

4 RCO2H + 2 Cr(C5H5)2 → Cr2(O2CR)4 + 4 C5H6

This method provides anhydrous derivatives in a straightforward manner.[8]

Because it is so easily prepared, Cr2(OAc)4(H2O)2 is a starting material for other chromium(II) compounds. Also, many analogues have been prepared using other carboxylic acids in place of acetate and using different bases in place of the water.

Applications edit

Chromium(II) acetate has few practical applications. It has been used to dehalogenate organic compounds such as α-bromoketones and chlorohydrins.[9] The reactions appear to proceed via 1e steps, and rearrangement products are sometimes observed.

Because the compound is a good reducing agent, it will reduce the O2 found in air and can be used as an oxygen scrubber.

See also edit

References edit

  1. ^ Cotton, F. A.; Walton, R. A. (1993). Multiple Bonds Between Metal Atoms. Oxford: Oxford University Press. ISBN 0-19-855649-7.
  2. ^ Cotton, F. A.; Hillard, E.A.; Murillo, C. A.; Zhou, H.-C. (2000). "After 155 Years, A Crystalline Chromium Carboxylate with a Supershort Cr–Cr Bond". J. Am. Chem. Soc. 122 (2): 416–417. doi:10.1021/ja993755i.
  3. ^ Péligot, E.-M. (1844). "Sur un nouvel oxide de chrome" [On a new chromium oxide]. C. R. Acad. Sci. (in French). 19: 609–618.
  4. ^ Péligot, E.-M. (1844). "Recherches sur le chrome" [Research on chrome]. Ann. Chim. Phys. (in French). 12: 527–548.
  5. ^ Van Niekerk, J. N.; Schoening, F. R. L. (1953). "X-Ray Evidence for Metal-to-Metal Bonds in Cupric and Chromous Acetate". Nature. 171 (4340): 36–37. Bibcode:1953Natur.171...36V. doi:10.1038/171036a0. S2CID 4292992.
  6. ^ Ocone, L.R.; Block, B.P. (1966). "Anyhdrous Chromium(II) Acetate, Chromium(II) Acetate 1‐Hydrate, and Bis(2,4‐Pentanedionato)Chromium (II)". Inorganic Syntheses. Vol. 8. pp. 125–129. doi:10.1002/9780470132395.ch33. ISBN 978-0-470-13239-5. {{cite book}}: |journal= ignored (help)
  7. ^ Jolly, W. L. (1970). The Synthesis and Characterization of Inorganic Compounds. Prentice Hall. pp. 442–445. ISBN 9780138799328.
  8. ^ Beneš, L.; Kalousová, J.; Votinský, J. (1985). "Reaction of Chromocene with Carboxylic Acids and Some Derivatives of Acetic Acid". J. Organomet. Chem. 290 (2): 147–151. doi:10.1016/0022-328X(85)87428-3.
  9. ^ Ray, T. (2004). "Chromium(II) Acetate". In Paquette, L. (ed.). Encyclopedia of Reagents for Organic Synthesis. New York, NY: J. Wiley & Sons. doi:10.1002/047084289X. hdl:10261/236866. ISBN 9780471936237.

Further reading edit

  • Rice, Steven F.; Wilson, Randall B.; Solomon, Edward I. (1980). "Electronic Absorption Spectrum of Chromous Acetate Dihydrate and Related Binuclear Chromous Carboxylates". Inorg. Chem. 19 (11): 3425–3431. doi:10.1021/ic50213a042.

External links edit

  • http://www.molecules.org/coordcpds.html#Cr2OAc4H2O
  • [1] (outdated)
  • http://wwwchem.uwimona.edu.jm/courses/chromium.pdf