A clef (from French: clef 'key') is a musical symbol used to indicate which notes are represented by the lines and spaces on a musical stave. Placing a clef on a stave assigns a particular pitch to one of the five lines, which defines the pitches on the remaining lines and spaces.
The three clef symbols used in modern music notation are the G-clef, F-clef, and C-clef. Placing these clefs on a line fixes a reference note to that line—an F-clef fixes the F below middle C, a C-clef fixes middle C, and a G-clef fixes the G above middle C. In modern music notation, the G-clef is most frequently seen as treble clef (placing G4 on the second line of the stave), and the F-clef as bass clef (placing F3 on the fourth line). The C-clef is mostly encountered as alto clef (placing middle C on the third line) or tenor clef (middle C on the fourth line). A clef may be placed on a space instead of a line, but this is rare.
The use of different clefs makes it possible to write music for all instruments and voices, regardless of differences in range. Using different clefs for different instruments and voices allows each part to be written comfortably on a stave with a minimum of ledger lines. To this end, the G-clef is used for high parts, the C-clef for middle parts, and the F-clef for low parts. Transposing instruments can be an exception to this—the same clef is generally used for all instruments in a family, regardless of their sounding pitch. For example, even the low saxophones read in treble clef.
A symmetry exists with middle C for the F, C and G clefs. Two mnemonics for learning the clef lines are:
Theoretically, any clef may be placed on any line. With five lines on the stave and three clefs, there are fifteen possibilities for clef placement. Six of these are redundant because they result in an identical assignment of the notes to the lines (and spaces)—for example, a G-clef on the third line yields the same note placement as a C-clef on the bottom line. Thus, there are nine possible distinct clefs, all of which have been used historically: the G-clef on the two bottom lines, the F-clef on the three top lines, and the C-clef on any line except the topmost. The C-clef on the topmost line is equivalent to the F-clef on the third line but both options have been used.
Each of these clefs has a different name based on the tessitura for which it is best suited.
In modern music, only four clefs are used regularly: treble clef, bass clef, alto clef, and tenor clef. Of these, the treble and bass clefs are by far the most common. The tenor clef is used for the upper register of several instruments that usually use bass clef (including cello, bassoon, and trombone), while the alto is mostly only used by the viola.
|G-clef||G4||on the line that passes through the curl of the clef|
|C-clef||C4 (Middle C)||on the line that passes through the centre of the clef|
|F-clef||F3||on the line that passes between the two dots of the clef|
This section shows a complete list of the clefs, along with a list of instruments and voice parts notated with them. A dagger (†) after the name of a clef indicates that the clef is no longer in common use.
The only G-clef still in use is the treble clef, with the G-clef placed on the second line. This is the most common clef in use and is generally the first clef learned by music students. For this reason, the terms "G-clef" and "treble clef" are often seen as synonymous. The treble clef was historically used to mark a treble, or pre-pubescent, voice part.
Instruments that use the treble clef include violin, flute, oboe, cor anglais, all clarinets, all saxophones, horn, trumpet, cornet, vibraphone, xylophone, mandolin, recorder, bagpipe and guitar. Euphonium and baritone horn are sometimes treated as transposing instruments, using the treble clef and sounding a major ninth lower, and are sometimes treated as concert-pitch instruments, using bass clef. The treble clef is also the upper stave of the grand stave used for harp and keyboard instruments. Most high parts for bass-clef instruments (e.g. cello, double bass, bassoon, and trombone) are written in the tenor clef, but very high pitches may be notated in the treble clef. The viola also may use the treble clef for very high notes. The treble clef is used for the soprano, mezzo-soprano, alto, contralto and tenor voices. Tenor voice parts sound an octave lower and are often written using an octave clef (see below) or a double-treble clef.
A G-clef placed on the first line is called the French clef, or French violin clef. This clef was used in the seventeenth and eighteenth centuries in France for violin music and flute music.
When the F-clef is placed on the third line, it is called the baritone clef. Baritone clef was used for the left hand of keyboard music (particularly in France; see Bauyn manuscript) and for baritone parts in vocal music. A C-clef on the fifth line creates a staff with identical notes to the baritone clef but this variant is rare. (see below).
The only F-clef still in use is the bass clef, with the clef placed on the fourth line. Since it is the only F-clef commonly encountered, the terms "F-clef" and "bass clef" are often regarded as synonymous.
Bass clef is used for the cello, double bass and bass guitar, bassoon and contrabassoon, trombone, tuba, and timpani. It is used for baritone horn or euphonium when their parts are written at concert pitch, and sometimes for the lowest notes of the horn. Baritone and bass voices also use bass clef, and the tenor voice is notated in bass clef if the tenor and bass are written on the same stave. Bass clef is the bottom clef in the grand stave for harp and keyboard instruments. Double bass, bass guitar, and contrabassoon sound an octave lower than the written pitch; some scores show an "8" beneath the clef for these instruments to differentiate from instruments that sound at the actual written pitch. (see "Octave clefs" below).
When the F-clef is placed on the fifth line, it is called the sub-bass clef. It was used by Johannes Ockeghem and Heinrich Schütz to write low bass parts, by Monsieur de Sainte-Colombe for low notes on the bass viol, and by J.S. Bach in his Musical Offering.
A C-clef on the third line of the stave is called the alto or viola clef. It is currently used for viola, viola d'amore, alto trombone, viola da gamba, and mandola. It is also associated with the countertenor voice and sometimes called the countertenor clef. A vestige of this survives in Sergei Prokofiev's use of the clef for the cor anglais in his symphonies. It occasionally appears in keyboard music (for example, in Brahms's Organ Chorales and John Cage's Dream for piano).
A C-clef on the fourth line of the stave is called tenor clef. It is used for the viola da gamba and for upper ranges of bass-clef instruments such as the bassoon, cello, euphonium, double bass, and tenor trombone. Treble clef may also be used for the upper extremes of these bass-clef instruments. Tenor violin parts were also written in this clef (see e.g. Giovanni Battista Vitali's Op. 11). It was used by the tenor part in vocal music but its use has been largely supplanted[why?] either with an octave version of the treble clef or with bass clef when tenor and bass parts are written on a single stave.
A C-clef on the second line of the stave is called the mezzo-soprano clef, rarely used in modern Western classical music. It was used in 17th century French orchestral music for the second viola or first tenor part ('taille') by such composers as Lully, and for mezzo-soprano voices in operatic roles, notably by Claudio Monteverdi. Mezzo-soprano clef was also used for certain flute parts during renaissance, especially when doubling vocal lines. In Azerbaijani music, the Tar uses this clef.
A C-clef on the first line of the stave is called the soprano clef. It was used for the right hand of keyboard music (particularly in France – see Bauyn manuscript), in vocal music for sopranos, and sometimes in high viola da gamba[clarification needed] parts along with the alto clef. It was used for the second violin part ('haute-contre') in 17th century French music.
Starting in the 18th-century, music for some instruments (such as guitar) and for the tenor voice have used treble clef, although they sound an octave lower. To avoid ambiguity, modified clefs are sometimes used, especially in choral writing. Using a C-clef on the third space places the notes identically, but this notation is less common.
Such a modified treble clef is most often found in tenor parts in SATB settings, using a treble clef with the numeral 8 below it — this indicates that the pitches sound an octave lower. As the true tenor clef has fallen into disuse in vocal writings, this "octave-dropped" treble clef is often called the tenor clef. The same clef is sometimes used for the octave mandolin. This can also be indicated with two overlapping G-clefs.
Tenor banjo is commonly notated in treble clef. However, notation varies between the written pitch sounding an octave lower (as in guitar music and called octave pitch in most tenor banjo methods) and music sounding at the written pitch (called actual pitch). An attempt has been made to use a treble clef with a diagonal line through the upper half of the clef to indicate octave pitch, but this is not always used.
To indicate that notes sound an octave higher than written, a treble clef with an 8 positioned above the clef may be used for penny whistle, soprano and sopranino recorder, and other high woodwind parts. A treble clef with a 15 above (sounding two octaves above the standard treble clef) is used for the garklein (sopranissimo) recorder.
An F-clef can also be notated with an octave marker. While the F-clef notated to sound an octave lower can be used for contrabass instruments such as the double bass and contrabassoon, and the F-clef notated to sound an octave higher can be used for the bass recorder, these uses are extremely rare. In Italian scores up to Gioachino Rossini's Overture to William Tell, the cor anglais was written in bass clef an octave lower than sounding. The unmodified bass clef is so common that performers of instruments whose ranges lie below the stave simply learn to read ledger lines.
Octave-marked clefs are useful in music notation software to keep the score readable while having the notes play back at their correct pitch.
The neutral or percussion clef is not a true clef like the F, C, and G clefs. Rather, it assigns different unpitched percussion instruments to the lines and spaces of the stave. With the exception of some common drum-kit and marching percussion layouts, the assignment of lines and spaces to instruments is not standardised, so a legend is required to show which instrument each line or space represents. Pitched percussion instruments do not use this clef — timpani are notated in bass clef and mallet percussion instruments are noted in treble clef or on a grand stave.
If the neutral clef is used for a single percussion instrument the stave may only have one line, although other configurations are used.
The neutral clef is sometimes used where non-percussion instruments play non-pitched extended techniques, such as hitting the body of a string instrument, or having a vocal choir clap, stamp, or snap. However, it is more common to write the rhythms using X noteheads on the instrument's normal stave, with a comment to indicate the appropriate rhythmic action.
For guitars and other fretted instruments, it is possible to notate tablature in place of ordinary notes. This TAB sign is not a clef — it does not indicate the placement of notes on a stave. The lines shown are not a music stave but rather represent the strings of the instrument (six lines would be used for guitar, four lines for the bass guitar, etc.), with numbers on the lines showing which fret should be used.
Before the advent of clefs, the reference line of a stave was simply labeled with the name of the note it was intended to bear: F, C, or sometimes G. These were the most common 'clefs', or litterae clavis (key-letters), in Gregorian chant notation. Over time the shapes of these letters became stylised, leading to their current versions.
Many other clefs were used, particularly in the early period of chant notation, keyed to many different notes, from the low Γ (gamma, the G on the bottom line of the bass clef) to the G above middle C (written with a small letter g). These included two different lowercase b symbols for the note just below middle C: round for B♭, and square for B♮. In order of frequency of use, these clefs were: F, c, f, C, D, a, g, e, Γ, B, and the round and square b.
In the polyphonic period up to 1600, unusual clefs were occasionally used for parts with extremely high or low tessituras. For very low bass parts, the Γ clef is found on the middle, fourth, or fifth lines of the stave (e.g., in Pierre de La Rue’s Requiem and in a mid-16th-century dance book published by the Hessen brothers); for very high parts, the high-D clef (d), and the even higher ff clef (e.g., in the Mulliner Book) were used to represent the notes written on the fourth and top lines of the treble clef, respectively.
The practice of using different shapes for the same clef persisted until very recent times. The F-clef was, until as late as the 1980s in some cases (such as hymnals), or in British and French publications, written like this:
In printed music from the 16th and 17th centuries, the C clef often assumed a ladder-like form, in which the two horizontal rungs surround the stave line indicated as C: ; this form survived in some printed editions (see this example, written in four-part men's harmony and positioned to make it equivalent to an octave G clef) into the 20th century.
The C-clef was formerly written in a more angular way, sometimes still used, or, more often, as a simplified K-shape when writing the clef by hand:
In modern Gregorian chant notation the C clef is written (on a four-line stave) in the form and the F clef as
C clefs (along with G, F, Γ, D, and A clefs) were formerly used to notate vocal music. Nominally, the soprano voice parts were written in first- or second-line C clef (soprano clef or mezzo-soprano clef) or second-line G clef (treble clef), the alto or tenor voices in third-line C clef (alto clef), the tenor voice in fourth-line C clef (tenor clef) and the bass voice in third-, fourth- or fifth-line F clef (baritone, bass, or sub-bass clef).
Until the 19th century, the most common arrangement for vocal music used the following clefs:
In more modern publications, four-part music on parallel staves is usually written more simply as:
This may be reduced to two staves, the soprano/alto stave with a treble clef, and tenor/bass stave marked with the bass clef.
Clef combinations played a role in the modal system toward the end of the 16th century, and it has been suggested certain clef combinations in the polyphonic music of 16th-century vocal polyphony are reserved for authentic (odd-numbered) modes, and others for plagal (even-numbered) modes, but the precise implications have been the subject of much scholarly debate.
Reading music as if it were in a different clef from the one indicated can be an aid in transposing music at sight since it will move the pitches roughly in parallel to the written part. Key signatures and accidentals need to be accounted for when this is done.
|Wikimedia Commons has media related to Clefs.|