Shortly after the first advisory on Tropical Disturbance 13F was issued on March 9, the Fiji Meteorological Service (FMS) began monitoring a new disturbance, designated 14F, further east.^[1] The following day, deep convection began to develop around the disturbance's low-level circulation, prompting the JTWC to begin monitoring it for possible cyclonic development.^[2] Later on March 10, the FMS upgraded the system to a tropical depression as it continued to become better organized.^[3] Located within an environment characterized by low wind shear, further intensification was anticipated as convection continued to develop over the expanding system.^[4] Around 1500 UTC on March 11, the JTWC issued their first advisory on the cyclone, classifying it as Tropical Storm 19P.^[5] Several hours later, the FMS upgraded the system to a Category 1 cyclone and gave it the name Tomas. Rapid intensification was expected to take place over the following 48 hours as sea surface temperatures ahead of the storm averaged 30 °C (86 °F), well-above the threshold for tropical cyclone development.^[6]

Throughout the day on March 12, Tomas steadily intensified,^[7] and early the next day, the JTWC upgraded the storm to a Category 1 equivalent hurricane with winds of 120 km/h (75 mph).^[8] Convective banding substantially increased on March 13, allowing Tomas to become the fourth severe tropical cyclone of the season early the next morning.^[9] Around the same time, the JTWC assessed the storm to have attained winds of 155 km/h (95 mph), ranking it as a Category 2 cyclone.^[8] By the afternoon of March 14, Tomas had developed a banding-eye feature surrounded by deep convection. At this point, the FMS assessed the storm to have winds of 150 km/h (95 mph) and a pressure of 950 hPa (mbar).^[10] The JTWC also noted further intensification, upgrading Tomas to a Category 3 equivalent storm.^[8] As it passed near Vanua Levu on March 15, the cyclone attained its peak intensity with winds of 175 km/h (110 mph) and a pressure of 930 hPa (mbar) according to the FMS. At the same time, the Joint Typhoon Warning Center assessed it as a Category 4 equivalent storm with 1-minute sustained winds of 215 km/h (135 mph).^[8]

One person was killed on Vanua Levu after being swept out to sea by large swells while trying to rescue her two sisters, a niece and a nephew near Namilamila Bay.^[11]

In the northernmost islands of Fiji, communication with Cikobia and Qelelevu was lost on March 15 as the cyclone passed through the region. Officials feared that severe damage and loss of life occurred on the island. Many homes along rivers and the Pacific were washed away by rising waters and tides exceeding 7 m (23 ft). Parts of the region have been soaked with upwards of 350 mm (14 in) of rain over a two-day span with more falling. Power and running water was disrupted to numerous islands, forcing thousands to seek shelter. During the initial assessment of damage, at least 50 homes were confirmed to have been destroyed by Tomas. This prompted Fijian officials to declare a State of disaster for the northern and eastern divisions of Fiji.^[12][13]

On its way, the cyclone has passed near Futuna island, heavily damaging an important part of houses and other buildings and cutting the water and electricity supply, but leaving no human casualties. The most severed was the north-eastern part of the island and notably the village of Poi and its surroundings. There, the islands only road was washed away and most of the houses were completely demolished by strong wind and rising waves.

After the storm, the governments of New Zealand and Australia each sent $1 million in their respective currencies to Fiji. The New Zealand Air Force sent relief supplies, including tarps and water purifying equipment.^[14]

• Cyclone Pat
• Cyclone Ami

• World Meteorological Organization
• Australian Bureau of Meteorology
• Fiji Meteorological Service
• New Zealand MetService
• Joint Typhoon Warning Center