KNOWPIA
WELCOME TO KNOWPIA

Part of a series of articles about |

Calculus |
---|

**Disc integration**, also known in integral calculus as the **disc method**, is a method for calculating the volume of a solid of revolution of a solid-state material when integrating along an axis "parallel" to the axis of revolution. This method models the resulting three-dimensional shape as a stack of an infinite number of discs of varying radius and infinitesimal thickness. It is also possible to use the same principles with rings instead of discs (the "**washer method**") to obtain hollow solids of revolutions. This is in contrast to shell integration, which integrates along an axis *perpendicular* to the axis of revolution.

If the function to be revolved is a function of x, the following integral represents the volume of the solid of revolution:

where *R*(*x*) is the distance between the function and the axis of rotation. This works only if the axis of rotation is horizontal (example: *y* = 3 or some other constant).

If the function to be revolved is a function of y, the following integral will obtain the volume of the solid of revolution:

where *R*(*y*) is the distance between the function and the axis of rotation. This works only if the axis of rotation is vertical (example: *x* = 4 or some other constant).

To obtain a hollow solid of revolution (the “washer method”), the procedure would be to take the volume of the inner solid of revolution and subtract it from the volume of the outer solid of revolution. This can be calculated in a single integral similar to the following:

where *R*_{O}(*x*) is the function that is farthest from the axis of rotation and *R*_{I}(*x*) is the function that is closest to the axis of rotation. For example, the next figure shows the rotation along the x-axis of the red "leaf" enclosed between the square-root and quadratic curves:

The volume of this solid is:

One should take caution not to evaluate the square of the difference of the two functions, but to evaluate the difference of the squares of the two functions.

(This formula only works for revolutions about the x-axis.)

To rotate about any horizontal axis, simply subtract from that axis each formula. If h is the value of a horizontal axis, then the volume equals

For example, to rotate the region between *y* = −2*x* + *x*^{2} and *y* = *x* along the axis *y* = 4, one would integrate as follows:

The bounds of integration are the zeros of the first equation minus the second. Note that when integrating along an axis other than the x, the graph of the function that is farthest from the axis of rotation may not be that obvious. In the previous example, even though the graph of *y* = *x* is, with respect to the x-axis, further up than the graph of *y* = −2*x* + *x*^{2}, with respect to the axis of rotation the function *y* = *x* is the inner function: its graph is closer to *y* = 4 or the equation of the axis of rotation in the example.

The same idea can be applied to both the y-axis and any other vertical axis. One simply must solve each equation for x before one inserts them into the integration formula.

- "Volumes of Solids of Revolution".
*CliffsNotes.com*. Retrieved July 8, 2014. - Weisstein, Eric W. "Method of Disks".
*MathWorld*. - Frank Ayres, Elliott Mendelson.
*Schaum's Outlines: Calculus*. McGraw-Hill Professional 2008, ISBN 978-0-07-150861-2. pp. 244–248 (*online copy*, p. 244, at Google Books. Retrieved July 12, 2013.)