Edmonds station was built in 1985 as part of the original SkyTrain system (now known as the Expo Line). In 2002, Millennium Line service was introduced to the station, which provided outbound service to VCC–Clark station (originally Commercial) via Columbia station in New Westminster. This service was discontinued and replaced with the Expo Line branch to Production Way–University in 2016.

• Edmonds station bus loop provides services to a number of TransLink bus routes serving Burnaby and New Westminster. It replaced the former Edmonds Loop located northeast of the station, at the intersection of Kingsway and Edmonds.
• Due to the proximity to the maintenance and storage facility, the station serves as the starting point for some early morning outbound Expo trains toward King George station and Production Way–University station.
• The station also serves as a temporary terminus for SkyTrain when trains are taken out of service at the end of morning rush hours.

Station layout edit

Entrances edit

The main entrance to the station is located near the northeast end of the platform. It is directly attached to the inbound platform (Platform 1). Passengers using the outbound platform (Platform 2) must use an overhead walkway to cross the tracks. There is no escalator available for the walkway.

Prior to the installation of fare gates, a secondary entrance was located southeast of the main entrance, which also gave access to the inbound platform. It was built by opening up an emergency exit after the station was in operation. Access to the outbound platform had to use the same walkway as the main entrance.

Transit connections edit

Edmonds station provides an off-street transit exchange at the northeast side of the station, at the end of 18th Avenue. Bus bay assignments is as follows:^[2]