Frozen orbit

Summary

In orbital mechanics, a frozen orbit is an orbit for an artificial satellite in which perturbations have been minimized by careful selection of the orbital parameters. Perturbations can result from natural drifting due to the central body's shape, or other factors. Typically, the altitude of a satellite in a frozen orbit remains constant at the same point in each revolution over a long period of time.[1] Variations in the inclination, position of the apsis of the orbit, and eccentricity have been minimized by choosing initial values so that their perturbations cancel out.[2] This results in a long-term stable orbit that minimizes the use of station-keeping propellant.

Background and motivation edit

For spacecraft in orbit around the Earth, changes to orbital parameters are caused by the oblateness of the Earth, gravitational attraction from the Sun and Moon, solar radiation pressure and air drag. These are called perturbing forces. They must be counteracted by maneuvers to keep the spacecraft in the desired orbit. For a geostationary spacecraft, correction maneuvers on the order of 40–50 m/s (89–112 mph) per year are required to counteract the gravitational forces from the Sun and Moon which move the orbital plane away from the equatorial plane of the Earth.[citation needed]

For Sun-synchronous spacecraft, intentional shifting of the orbit plane (called "precession") can be used for the benefit of the mission. For these missions, a near-circular orbit with an altitude of 600–900 km is used. An appropriate inclination (97.8-99.0 degrees) is selected so that the precession of the orbital plane is equal to the rate of movement of the Earth around the Sun, about 1 degree per day.

As a result, the spacecraft will pass over points on the Earth that have the same time of day during every orbit. For instance, if the orbit is "square to the Sun", the vehicle will always pass over points at which it is 6 a.m. on the north-bound portion, and 6 p.m. on the south-bound portion (or vice versa). This is called a "Dawn-Dusk" orbit. Alternatively, if the Sun lies in the orbital plane, the vehicle will always pass over places where it is midday on the north-bound leg, and places where it is midnight on the south-bound leg (or vice versa). These are called "Noon-Midnight" orbits. Such orbits are desirable for many Earth observation missions such as weather, imagery, and mapping.

The perturbing force caused by the oblateness of the Earth will in general perturb not only the orbital plane but also the eccentricity vector of the orbit. There exists, however, an almost circular orbit for which there are no secular/long periodic perturbations of the eccentricity vector, only periodic perturbations with period equal to the orbital period. Such an orbit is then perfectly periodic (except for the orbital plane precession) and it is therefore called a "frozen orbit". Such an orbit is often the preferred choice for an Earth observation mission where repeated observations of the same area of the Earth should be made under as constant observation conditions as possible.

The Earth observation satellites ERS-1, ERS-2 and Envisat are operated in Sun-synchronous frozen orbits.

Lunar frozen orbits edit

Low orbits

Through a study of many lunar orbiting satellites, scientists have discovered that most low lunar orbits (LLO) are unstable.[3] Four frozen lunar orbits have been identified at 27°, 50°, 76°, and 86° inclination. NASA described this in 2006:

Lunar mascons make most low lunar orbits unstable ... As a satellite passes 50 or 60 miles overhead, the mascons pull it forward, back, left, right, or down, the exact direction and magnitude of the tugging depends on the satellite's trajectory. Absent any periodic boosts from onboard rockets to correct the orbit, most satellites released into low lunar orbits (under about 60 miles or 100 km) will eventually crash into the Moon. ... [There are] a number of 'frozen orbits' where a spacecraft can stay in a low lunar orbit indefinitely. They occur at four inclinations: 27°, 50°, 76°, and 86°"—the last one being nearly over the lunar poles. The orbit of the relatively long-lived Apollo 15 subsatellite PFS-1 had an inclination of 28°, which turned out to be close to the inclination of one of the frozen orbits—but less fortunate PFS-2 had an orbital inclination of only 11°.[4]

Elliptical inclined orbits

For lunar orbits with altitudes in the 500 to 20,000 km (310 to 12,430 mi) range, the gravity of Earth leads to orbit perturbations. Work published in 2005 showed a class of elliptical inclined lunar orbits resistant to this and are thus also frozen.[5]

Classical theory edit

The classical theory of frozen orbits is essentially based on the analytical perturbation analysis for artificial satellites of Dirk Brouwer made under contract with NASA and published in 1959.[6]

This analysis can be carried out as follows:

In the article orbital perturbation analysis the secular perturbation of the orbital pole   from the   term of the geopotential model is shown to be

 

 

 

 

 

(1)

which can be expressed in terms of orbital elements thus:

 

 

 

 

 

(2)

 

 

 

 

 

(3)

Making a similar analysis for the   term (corresponding to the fact that the earth is slightly pear shaped), one gets

 

 

 

 

 

(4)

which can be expressed in terms of orbital elements as

 

 

 

 

 

(5)

 

 

 

 

 

(6)

In the same article the secular perturbation of the components of the eccentricity vector caused by the   is shown to be:

 

 

 

 

 

(7)

where:

  • The first term is the in-plane perturbation of the eccentricity vector caused by the in-plane component of the perturbing force
  • The second term is the effect of the new position of the ascending node in the new orbital plane, the orbital plane being perturbed by the out-of-plane force component

Making the analysis for the   term one gets for the first term, i.e. for the perturbation of the eccentricity vector from the in-plane force component

 

 

 

 

 

(8)

For inclinations in the range 97.8–99.0 deg, the   value given by (6) is much smaller than the value given by (3) and can be ignored. Similarly the quadratic terms of the eccentricity vector components in (8) can be ignored for almost circular orbits, i.e. (8) can be approximated with

 

 

 

 

 

(9)

Adding the   contribution  

to (7) one gets

 

 

 

 

 

(10)

Now the difference equation shows that the eccentricity vector will describe a circle centered at the point  ; the polar argument of the eccentricity vector increases with   radians between consecutive orbits.

As

 
 
 

one gets for a polar orbit ( ) with   that the centre of the circle is at   and the change of polar argument is 0.00400 radians per orbit.

The latter figure means that the eccentricity vector will have described a full circle in 1569 orbits. Selecting the initial mean eccentricity vector as   the mean eccentricity vector will stay constant for successive orbits, i.e. the orbit is frozen because the secular perturbations of the   term given by (7) and of the   term given by (9) cancel out.

In terms of classical orbital elements, this means that a frozen orbit should have the following mean elements:

 
 

Modern theory edit

The modern theory of frozen orbits is based on the algorithm given in a 1989 article by Mats Rosengren.[7]

For this the analytical expression (7) is used to iteratively update the initial (mean) eccentricity vector to obtain that the (mean) eccentricity vector several orbits later computed by the precise numerical propagation takes precisely the same value. In this way the secular perturbation of the eccentricity vector caused by the   term is used to counteract all secular perturbations, not only those (dominating) caused by the   term. One such additional secular perturbation that in this way can be compensated for is the one caused by the solar radiation pressure, this perturbation is discussed in the article "Orbital perturbation analysis (spacecraft)".

Applying this algorithm for the case discussed above, i.e. a polar orbit ( ) with   ignoring all perturbing forces other than the   and the   forces for the numerical propagation one gets exactly the same optimal average eccentricity vector as with the "classical theory", i.e.  .

When we also include the forces due to the higher zonal terms the optimal value changes to  .

Assuming in addition a reasonable solar pressure (a "cross-sectional-area" of 0.05 m2/kg, the direction to the sun in the direction towards the ascending node) the optimal value for the average eccentricity vector becomes   which corresponds to : , i.e. the optimal value is not   anymore.

This algorithm is implemented in the orbit control software used for the Earth observation satellites ERS-1, ERS-2 and Envisat

Derivation of the closed form expressions for the J3 perturbation edit

The main perturbing force to be counteracted in order to have a frozen orbit is the "  force", i.e. the gravitational force caused by an imperfect symmetry north–south of the Earth, and the "classical theory" is based on the closed form expression for this "  perturbation". With the "modern theory" this explicit closed form expression is not directly used but it is certainly still worthwhile[for whom?] to derive it. The derivation of this expression can be done as follows:

The potential from a zonal term is rotational symmetric around the polar axis of the Earth and corresponding force is entirely in a longitudinal plane with one component   in the radial direction and one component   with the unit vector   orthogonal to the radial direction towards north. These directions   and   are illustrated in Figure 1.

 
Figure 1: The unit vectors  

In the article Geopotential model it is shown that these force components caused by the   term are

 

 

 

 

 

(11)

To be able to apply relations derived in the article Orbital perturbation analysis (spacecraft) the force component   must be split into two orthogonal components   and   as illustrated in figure 2

 
Figure 2: The unit vector   orthogonal to   in the direction of motion and the orbital pole  . The force component   is marked as "F"

Let   make up a rectangular coordinate system with origin in the center of the Earth (in the center of the Reference ellipsoid) such that   points in the direction north and such that   are in the equatorial plane of the Earth with   pointing towards the ascending node, i.e. towards the blue point of Figure 2.

The components of the unit vectors

 

making up the local coordinate system (of which   are illustrated in figure 2), and expressing their relation with  , are as follows:

 
 
 
 
 
 
 
 
 

where   is the polar argument of   relative the orthogonal unit vectors   and   in the orbital plane

Firstly

 

where   is the angle between the equator plane and   (between the green points of figure 2) and from equation (12) of the article Geopotential model one therefore obtains

 

 

 

 

 

(12)

Secondly the projection of direction north,  , on the plane spanned by   is

 

and this projection is

 

where   is the unit vector   orthogonal to the radial direction towards north illustrated in figure 1.

From equation (11) we see that

 

and therefore:

 

 

 

 

 

(13)

 

 

 

 

 

(14)

In the article Orbital perturbation analysis (spacecraft) it is further shown that the secular perturbation of the orbital pole   is

 

 

 

 

 

(15)

Introducing the expression for   of (14) in (15) one gets

 

 

 

 

 

(16)

The fraction   is

 

where

 
 

are the components of the eccentricity vector in the   coordinate system.

As all integrals of type

 

are zero if not both   and   are even, we see that

 

 

 

 

 

(17)

and

 

 

 

 

 

(18)

It follows that

 

 

 

 

 

(19)

where

  and   are the base vectors of the rectangular coordinate system in the plane of the reference Kepler orbit with   in the equatorial plane towards the ascending node and   is the polar argument relative this equatorial coordinate system
  is the force component (per unit mass) in the direction of the orbit pole  

In the article Orbital perturbation analysis (spacecraft) it is shown that the secular perturbation of the eccentricity vector is

 

 

 

 

 

(20)

where

  •   is the usual local coordinate system with unit vector   directed away from the Earth
  •   - the velocity component in direction  
  •   - the velocity component in direction  

Introducing the expression for   of (12) and (13) in (20) one gets

 

 

 

 

 

(21)

Using that

 

the integral above can be split in 8 terms:

 

 

 

 

 

(22)

Given that

 
 

we obtain

 

and that all integrals of type

 

are zero if not both   and   are even:

Term 1

 

 

 

 

 

(23)

Term 2

 

 

 

 

 

(24)

Term 3

 

 

 

 

 

(25)

Term 4

 

 

 

 

 

(26)

Term 5

 

 

 

 

 

(27)

Term 6

 

 

 

 

 

(28)

Term 7

 

 

 

 

 

(29)

Term 8

 

 

 

 

 

(30)

As

 

 

 

 

 

(31)

It follows that

 

 

 

 

 

(32)

References edit

  1. ^ Eagle, C. David. "Frozen Orbit Design" (PDF). Orbital Mechanics with Numerit. Archived from the original (PDF) on 21 November 2011. Retrieved 5 April 2012.
  2. ^ Chobotov, Vladimir A. (2002). Orbital Mechanics (3rd ed.). American Institute of Aeronautics and Astronautics. p. 221.
  3. ^ Frozen Orbits About the Moon. 2003
  4. ^ Bell, Trudy E. (November 6, 2006). Phillips, Tony (ed.). "Bizarre Lunar Orbits". Science@NASA. NASA. Retrieved 2017-09-08.
  5. ^ Ely, Todd (July 2005). "Stable Constellations of Frozen Elliptical Inclined Lunar Orbits". The Journal of the Astronautical Sciences. 53 (3): 301–316. doi:10.1007/BF03546355.
  6. ^ Dirk Brouwer: "Solution of the Problem of the Artificial Satellite Without Drag", Astronomical Journal, 64 (1959)
  7. ^ Mats Rosengren (1989). "Improved technique for Passive Eccentricity Control (AAS 89-155)". Advances in the Astronautical Sciences. Vol. 69. AAS/NASA. Bibcode:1989ommd.proc...49R.

Further reading edit

  • STUDY OF ORBITAL ELEMENTS ON THE NEIGHBOURHOOD OF A FROZEN ORBIT. including atmospheric drag and J5 terms