In mathematics, gradient descent (also often called steepest descent) is a firstorder iterative optimization algorithm for finding a local minimum of a differentiable function. The idea is to take repeated steps in the opposite direction of the gradient (or approximate gradient) of the function at the current point, because this is the direction of steepest descent. Conversely, stepping in the direction of the gradient will lead to a local maximum of that function; the procedure is then known as gradient ascent.
Gradient descent is generally attributed to AugustinLouis Cauchy, who first suggested it in 1847.^{[1]} Jacques Hadamard independently proposed a similar method in 1907.^{[2]}^{[3]} Its convergence properties for nonlinear optimization problems were first studied by Haskell Curry in 1944,^{[4]} with the method becoming increasingly wellstudied and used in the following decades.^{[5]}^{[6]}
Gradient descent is based on the observation that if the multivariable function is defined and differentiable in a neighborhood of a point , then decreases fastest if one goes from in the direction of the negative gradient of at . It follows that, if
for a small enough step size or learning rate , then . In other words, the term is subtracted from because we want to move against the gradient, toward the local minimum. With this observation in mind, one starts with a guess for a local minimum of , and considers the sequence such that
We have a monotonic sequence
so, hopefully, the sequence converges to the desired local minimum. Note that the value of the step size is allowed to change at every iteration. With certain assumptions on the function (for example, convex and Lipschitz) and particular choices of (e.g., chosen either via a line search that satisfies the Wolfe conditions, or the Barzilai–Borwein method^{[7]}^{[8]} shown as following),
convergence to a local minimum can be guaranteed. When the function is convex, all local minima are also global minima, so in this case gradient descent can converge to the global solution.
This process is illustrated in the adjacent picture. Here, is assumed to be defined on the plane, and that its graph has a bowl shape. The blue curves are the contour lines, that is, the regions on which the value of is constant. A red arrow originating at a point shows the direction of the negative gradient at that point. Note that the (negative) gradient at a point is orthogonal to the contour line going through that point. We see that gradient descent leads us to the bottom of the bowl, that is, to the point where the value of the function is minimal.
The basic intuition behind gradient descent can be illustrated by a hypothetical scenario. A person is stuck in the mountains and is trying to get down (i.e., trying to find the global minimum). There is heavy fog such that visibility is extremely low. Therefore, the path down the mountain is not visible, so they must use local information to find the minimum. They can use the method of gradient descent, which involves looking at the steepness of the hill at their current position, then proceeding in the direction with the steepest descent (i.e., downhill). If they were trying to find the top of the mountain (i.e., the maximum), then they would proceed in the direction of steepest ascent (i.e., uphill). Using this method, they would eventually find their way down the mountain or possibly get stuck in some hole (i.e., local minimum or saddle point), like a mountain lake. However, assume also that the steepness of the hill is not immediately obvious with simple observation, but rather it requires a sophisticated instrument to measure, which the person happens to have at the moment. It takes quite some time to measure the steepness of the hill with the instrument, thus they should minimize their use of the instrument if they wanted to get down the mountain before sunset. The difficulty then is choosing the frequency at which they should measure the steepness of the hill so not to go off track.
In this analogy, the person represents the algorithm, and the path taken down the mountain represents the sequence of parameter settings that the algorithm will explore. The steepness of the hill represents the slope of the function at that point. The instrument used to measure steepness is differentiation. The direction they choose to travel in aligns with the gradient of the function at that point. The amount of time they travel before taking another measurement is the step size.
Since using a step size that is too small would slow convergence, and a too large would lead to divergence, finding a good setting of is an important practical problem. Philip Wolfe also advocated for using "clever choices of the [descent] direction" in practice.^{[9]} Whilst using a direction that deviates from the steepest descent direction may seem counterintuitive, the idea is that the smaller slope may be compensated for by being sustained over a much longer distance.
To reason about this mathematically, consider a direction and step size and consider the more general update:
Finding good settings of and requires some thought. First of all, we would like the update direction to point downhill. Mathematically, letting denote the angle between and , this requires that To say more, we need more information about the objective function that we are optimising. Under the fairly weak assumption that is continuously differentiable, we may prove that:^{[10]}

(1) 
This inequality implies that the amount by which we can be sure the function is decreased depends on a trade off between the two terms in square brackets. The first term in square brackets measures the angle between the descent direction and the negative gradient. The second term measures how quickly the gradient changes along the descent direction.
In principle inequality (1) could be optimized over and to choose an optimal step size and direction. The problem is that evaluating the second term in square brackets requires evaluating , and extra gradient evaluations are generally expensive and undesirable. Some ways around this problem are:
Usually by following one of the recipes above, convergence to a local minimum can be guaranteed. When the function is convex, all local minima are also global minima, so in this case gradient descent can converge to the global solution.
Gradient descent can be used to solve a system of linear equations
reformulated as a quadratic minimization problem. If the system matrix is real symmetric and positivedefinite, an objective function is defined as the quadratic function, with minimization of
so that
For a general real matrix , linear least squares define
In traditional linear least squares for real and the Euclidean norm is used, in which case
The line search minimization, finding the locally optimal step size on every iteration, can be performed analytically for quadratic functions, and explicit formulas for the locally optimal are known.^{[5]}^{[12]}
For example, for real symmetric and positivedefinite matrix , a simple algorithm can be as follows,^{[5]}
To avoid multiplying by twice per iteration, we note that implies , which gives the traditional algorithm,^{[13]}
The method is rarely used for solving linear equations, with the conjugate gradient method being one of the most popular alternatives. The number of gradient descent iterations is commonly proportional to the spectral condition number of the system matrix (the ratio of the maximum to minimum eigenvalues of ), while the convergence of conjugate gradient method is typically determined by a square root of the condition number, i.e., is much faster. Both methods can benefit from preconditioning, where gradient descent may require less assumptions on the preconditioner.^{[13]}
Gradient descent can also be used to solve a system of nonlinear equations. Below is an example that shows how to use the gradient descent to solve for three unknown variables, x_{1}, x_{2}, and x_{3}. This example shows one iteration of the gradient descent.
Consider the nonlinear system of equations
Let us introduce the associated function
where
One might now define the objective function
which we will attempt to minimize. As an initial guess, let us use
We know that
where the Jacobian matrix is given by
We calculate:
Thus
and
Now, a suitable must be found such that
This can be done with any of a variety of line search algorithms. One might also simply guess which gives
Evaluating the objective function at this value, yields
The decrease from to the next step's value of
is a sizable decrease in the objective function. Further steps would reduce its value further, until an approximate solution to the system was found.
Gradient descent works in spaces of any number of dimensions, even in infinitedimensional ones. In the latter case, the search space is typically a function space, and one calculates the Fréchet derivative of the functional to be minimized to determine the descent direction.^{[6]}
That gradient descent works in any number of dimensions (finite number at least) can be seen as a consequence of the CauchySchwarz inequality. That article proves that the magnitude of the inner (dot) product of two vectors of any dimension is maximized when they are colinear. In the case of gradient descent, that would be when the vector of independent variable adjustments is proportional to the gradient vector of partial derivatives.
The gradient descent can take many iterations to compute a local minimum with a required accuracy, if the curvature in different directions is very different for the given function. For such functions, preconditioning, which changes the geometry of the space to shape the function level sets like concentric circles, cures the slow convergence. Constructing and applying preconditioning can be computationally expensive, however.
The gradient descent can be combined with a line search, finding the locally optimal step size on every iteration. Performing the line search can be timeconsuming. Conversely, using a fixed small can yield poor convergence.
Methods based on Newton's method and inversion of the Hessian using conjugate gradient techniques can be better alternatives.^{[14]}^{[15]} Generally, such methods converge in fewer iterations, but the cost of each iteration is higher. An example is the BFGS method which consists in calculating on every step a matrix by which the gradient vector is multiplied to go into a "better" direction, combined with a more sophisticated line search algorithm, to find the "best" value of For extremely large problems, where the computermemory issues dominate, a limitedmemory method such as LBFGS should be used instead of BFGS or the steepest descent.
Gradient descent can be viewed as applying Euler's method for solving ordinary differential equations to a gradient flow. In turn, this equation may be derived as an optimal controller^{[16]} for the control system with given in feedback form .
Gradient descent can converge to a local minimum and slow down in a neighborhood of a saddle point. Even for unconstrained quadratic minimization, gradient descent develops a zigzag pattern of subsequent iterates as iterations progress, resulting in slow convergence. Multiple modifications of gradient descent have been proposed to address these deficiencies.
Yurii Nesterov has proposed^{[17]} a simple modification that enables faster convergence for convex problems and has been since further generalized. For unconstrained smooth problems the method is called the fast gradient method (FGM) or the accelerated gradient method (AGM). Specifically, if the differentiable function is convex and is Lipschitz, and it is not assumed that is strongly convex, then the error in the objective value generated at each step by the gradient descent method will be bounded by . Using the Nesterov acceleration technique, the error decreases at .^{[18]} It is known that the rate for the decrease of the cost function is optimal for firstorder optimization methods. Nevertheless, there is the opportunity to improve the algorithm by reducing the constant factor. The optimized gradient method (OGM)^{[19]} reduces that constant by a factor of two and is an optimal firstorder method for largescale problems.^{[20]}
For constrained or nonsmooth problems, Nesterov's FGM is called the fast proximal gradient method (FPGM), an acceleration of the proximal gradient method.
Trying to break the zigzag pattern of gradient descent, the momentum or heavy ball method uses a momentum term in analogy to a heavy ball sliding on the surface of values of the function being minimized,^{[5]} or to mass movement in Newtonian dynamics through a viscous medium in a conservative force field.^{[21]} Gradient descent with momentum remembers the solution update at each iteration, and determines the next update as a linear combination of the gradient and the previous update. For unconstrained quadratic minimization, a theoretical convergence rate bound of the heavy ball method is asymptotically the same as that for the optimal conjugate gradient method.^{[5]}
This technique is used in stochastic gradient descent and as an extension to the backpropagation algorithms used to train artificial neural networks.^{[22]}^{[23]} In the direction of updating, stochastic gradient descent adds a stochastic property. The weights can be used to calculate the derivatives.
Gradient descent can be extended to handle constraints by including a projection onto the set of constraints. This method is only feasible when the projection is efficiently computable on a computer. Under suitable assumptions, this method converges. This method is a specific case of the forwardbackward algorithm for monotone inclusions (which includes convex programming and variational inequalities).^{[24]}
Gradient descent is a special case of mirror descent using the squared Euclidean distance as the given Bregman divergence.^{[25]}
Using gradient descent in python for implementing machine learning algorithm, finding minima , linear regression