Hardboard

Summary

Hardboard, also called high-density fiberboard (HDF),[1] is a type of fiberboard, which is a pressed wood or engineered wood product.[2] It is used in furniture and in the construction industry.

A section of hardboard
Hardboard output in 2005
Hardboard

Description

edit

Hardboard is similar to particle board and medium-density fiberboard, but is denser, stronger and harder because it is made out of exploded wood fibers that have been highly compressed.[3]

The density of hardboard is higher than 500 kg/m3 (31 lb/cu ft),[4] usually about 800–1,040 kg/m3 (50–65 lb/cu ft).[5] It differs from particle board and medium-density fiberboard in that the bonding of the wood fibers requires no additional adhesive, the original lignin in the wood fibers sufficing to bond the hardboard together,[6] although resin is often added.

Hardboard is produced in either a wet or dry process. The wet process, known as the Mason Method,[7] leaves one smooth side and one textured side as a wire mesh is used to allow moisture to escape. Dry processed hardboard is smooth on both sides. Masonite is produced using the wet process only. In Europe today, the same type of fibreboard product generated by the wet process, is named as Natural Fibre Board, and this is a registered trademark.

History

edit

A product resembling hardboard was first made in England in 1898 by hot pressing waste paper.[8] In the 1900s, fiber building board of relatively low density was manufactured in Canada. At around the same time the first commercially produced MDF was developed in 1966 in Deposit, New York, United States. In the early 1920s, improved methods of compressing wet wood pulp at high temperatures resulted in a higher density product.[8]

Uses

edit

Unlike solid wood, hardboard is very homogeneous with no grain. A wood veneer can be glued onto it to give the appearance of solid wood. Other overlays include Formica, laminated papers, ceramics,[citation needed] and vinyl. It has many uses, such as a substrate. It is used in construction, flooring, furniture, home appliances, automobiles and cabinetry, and is popular among acrylic and oil painters as a painting surface due to its economical price (though it must be coated with gesso or canvas before use).[9] Hardboard has often been used as the surface material in clipboards, especially older models. It is also used as the final layer in many skateboard ramps and the half-pipe. Hardboard is also used extensively in theatrical environments, often used as the final painted surface of a stage and on walking surfaces of constructed scenery. Hardboard is also used to make puzzles, game boards, and other toys.

Tempered hardboard is a hardboard that has been coated with a thin film of linseed oil and then baked; this gives it more water resistance, impact resistance, hardness, rigidity and tensile strength. An earlier tempering process involved immersing the board in linseed oil or tung oil until it was 5 to 6 percent saturated, and heating to 170 °C (338 °F).[10] Tempered hardboard is used in construction siding.

 
Perforated hardboard

Perforated hardboard, also called pegboard, is tempered hardboard that has a uniform array of 18-or-14-inch (3.2 or 6.4 mm) holes in it, into which tool-hanging hooks or store fixtures can be placed.

Hardboard has become less popular in the construction industry in recent years due to new environmental targets[11] to procure more sustainable temporary protection materials.

See also

edit

Citations

edit
  1. ^ Gardziella, Arno, André Knop, and Louis A. Pilato (2010). Phenolic Resins: Chemistry, Applications, Standardization, Safety and Ecology. Berlin: Springer. p. 142. ISBN 3540655174.
  2. ^ "Hardboard, Perforated Board, Underlayment, Office Furniture – Composite Panel Association". Archived from the original on 2015-03-18. Retrieved 2013-08-16.
  3. ^ Gesimondo, Nancy, and James Christopher Postell. (2011). Materiality and Interior Construction. Hoboken, N.J.: Wiley. p. 365. ISBN 9780470445440.
  4. ^ Frane, 1994, p. 156
  5. ^ Hoadley, R. Bruce (2000). Understanding Wood: A Craftsman's Guide to Wood Technology. Taunton Press. ISBN 978-1-56158-358-4.
  6. ^ Akers, 1966, p. 125
  7. ^ U.S. patent 1,578,609 & U.S. patent 1,586,159
  8. ^ a b Akers, 1966, p. x
  9. ^ Christie's, Louis Valtat, "Child on the Carpet", 1910
  10. ^ Akers, 1966, p. 140
  11. ^ Government, HM. "Industrial Strategy: Government and Industry in Partnership" (PDF). www.gov.uk. HM Government. Retrieved 25 November 2014.

Works cited

edit
  • Akers, L. E. (1966). Particle Board and Hardboard. Oxford: Pergamon Press. OCLC 1097718.
  • Frane, J. T. (1994). Craftsman's Illustrated Dictionary of Construction Terms. Carlsbad, CA: Craftsman Book. OCLC 35958421.
edit
  • [dead link]Composite Panel Association: Hardboard
  • European Panel Federation: Hardboard