Headstock (rolling stock)

Summary

A headstock of a rail vehicle is a transverse structural member located at the extreme end of the vehicle's underframe. The headstock supports the coupling at that end of the vehicle, and may also support buffers, in which case it may also be known as a buffer beam.[1] The headstocks form part of the underframe of a locomotive or a railroad car. The headstocks of locomotives, railcars and cabcars also support headlamps and the hoses for air brakes, vacuum brakes as well as the cables for train control and head end power.

Buffer beam / headstock (painted red) fitted with buffers and chain coupler and air hoses on the front end of a German steam engine

Length over headstocksEdit

A commonly used measurement relating to a rail vehicle is its length over headstocks, which is the length of the vehicle excluding its couplings or buffers (if any).[2] An alternative expression for length over headstocks is length over coupler pulling faces, usually applied to Janney couplers.

See alsoEdit

ReferencesEdit

  1. ^ "Glossary". Railway Technical Web Pages. Railway Technical Web Pages. Archived from the original on 7 October 2014. Retrieved 29 August 2012.
  2. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Raleigh, North Carolina: Lulu.com. p. 196. ISBN 1847286437.