The scientists who developed the formulae were William Lawrence and John Newell. The pair started to investigate the procedure of making seed and potting composts following heavy losses of Primula sinensis seedlings in the 1933-34 season, which were an important experimental plant for JIHI geneticists.^[2]

After hundreds of trials, Lawrence and Newell arrived at their two standardised composts. These formulae were published in 1938, and they became known as "John Innes composts" in the horticultural trade.^[2]

The institution made the formulae generally available, but never manufactured the composts for sale nor benefited financially from their production.^[3]

There are four original formulae; one seedling mix and three potting mixes. The potting mixes have identical soil components and differ only in nutrient levels.^[4]

Seedling mix edit

The seedling mix is used to sow seeds and to grow young plants and cuttings until they are ready to be planted out.^[4]

The soil component contains:

• 2 parts sterilised loam
• 1 part peat
• 1 part sharp sand

With amendments of:

• 0.6 g/L ground limestone
• 1.2 g/L superphosphate^[5]

Potting mixes edit

The potting mixes are used to grow different types of plants depending on their nutrient requirements.^[1]

All three potting mixes have the same soil component:

• 7 parts sterilised loam
• 3 parts peat
• 2 parts sharp sand^[5]

They each contain ground limestone, and varying quantities of the same base fertiliser mix:

• 2 parts hoof and horn
• 2 parts superphosphate
• 1 part sulphate of potash^[4]

No. 1 edit

No. 1 contains the lowest level of nutrients, and is used for potting on young cuttings or seedlings.^[1] The base soil is amended with:

• 0.6 g/L ground limestone
• 3 g/L base fertiliser^[5]

No. 2 edit

No. 2 contains moderate nutrient levels, and is used for growing established plants and most vegetables.^[1] The base soil is amended with:

• 1.2 g/L ground limestone
• 6 g/L base fertiliser^[5]

No. 3 edit

No. 3 contains the highest nutrient levels, and is used for growing mature plants such as shrubs and trees.^[1] The base soil is amended with:

• 1.8 g/L ground limestone
• 9 g/L base fertiliser^[5]

Some new adaptations of the original recipes are also in use.

Peat-free alternatives edit

Peat-free John Innes composts may be made by replacing the peat in the recipe with a substitute such as wood fibre, coir, or bark.^[6] These substitutes tend to be less acidic than peat, so a smaller quantity of ground limestone is used to balance the pH level.^[4]

Cutting mix edit

As an alternative to using the original seedling mix, a special mix is sometimes used to root cuttings. The mix contains no added fertiliser or amendments, only the soil component:

• 1 part sterilised loam
• 2 parts peat
• 1 part sharp sand^[5]

Ericaceous mixes edit

Other mixes have been developed for ericaceous (calcifuge) plants which prefer more acidic soil. These mixes typically omit the ground limestone,^[5] and may also have added sulphur.^[7]

• John Innes Centre information on John Innes Compost
• John Innes Manufacturers' Association