KNOWPIA
WELCOME TO KNOWPIA
Liquid additive manufacturing 
Summary
Liquid additive manufacturing (LAM) is an additive manufacturing technique which deposits a liquid or high viscosity material (e.g Liquid Silicone Rubber) onto a build surface to create an object which then vulcanised using heat to harden the object.[1][2][3] The process was originally created by Adrian Bowyer and was then built upon by the company German RepRap.[1][4][5][6][7]
References edit
- ^ a b "German RepRap introduces L280, first Liquid Additive Manufacturing (LAM) production-ready 3D printer". 3ders.org. Retrieved 2019-04-13.
- ^ Davies, Sam (2018-11-02). "German RepRap to present series-ready Liquid Additive Manufacturing system at Formnext". TCT Magazine. Retrieved 2019-04-13.
- ^ "German RepRap presenting Liquid Additive Manufacturing technology at RAPID+TCT". TCT Magazine. 2017-05-10. Retrieved 2019-04-13.
- ^ Scott, Clare (2018-11-02). "German RepRap to Present Liquid Additive Manufacturing and L280 3D Printer at Formnext". 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing. Retrieved 2019-04-13.
- ^ "German RepRap develops new polyurethane material for Liquid Additive Manufacturing". TCT Magazine. 2017-08-02. Retrieved 2019-04-13.
- ^ "Dow and Dassault collaborate on QUANT-U silicone 3D printed footwear". 3D Printing Media Network. 2019-01-29. Retrieved 2019-04-13.
- ^ Saunders, Sarah (2017-08-02). "German RepRap Introduces New Polyurethane Material, Developed with ebalta Kunststoff for Liquid Additive Manufacturing Process". 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing. Retrieved 2019-04-13.