The purpose of measuring meridian arcs is to determine a figure of the Earth.
One or more measurements of meridian arcs can be used to infer the shape of the reference ellipsoid that best approximates the geoid in the region of the measurements. Measurements of meridian arcs at several latitudes along many meridians around the world can be combined in order to approximate a geocentric ellipsoid intended to fit the entire world.
The earliest determinations of the size of a spherical Earth required a single arc. Accurate survey work beginning in the 19th century required several arc measurements in the region the survey was to be conducted, leading to a proliferation of reference ellipsoids around the world. The latest determinations use astro-geodetic measurements and the methods of satellite geodesy to determine reference ellipsoids, especially the geocentric ellipsoids now used for global coordinate systems such as WGS 84 (see numerical expressions).
History of measurementEdit
Early estimations of Earth's size are recorded from Greece in the 4th century BC, and from scholars at the caliph's House of Wisdom in the 9th century. The first realistic value was calculated by Alexandrian scientist Eratosthenes about 240 BC. He estimated that the meridian has a length of 252,000 stadia, with an error on the real value between -2.4% and +0.8% (assuming a value for the stadion between 155 and 160 metres). Eratosthenes described his technique in a book entitled On the measure of the Earth, which has not been preserved. A similar method was used by Posidonius about 150 years later, and slightly better results were calculated in 827 by the arc measurement method, attributed to the Caliph Al-Ma'mun.
Early literature uses the term oblate spheroid to describe a sphere "squashed at the poles". Modern literature uses the term ellipsoid of revolution in place of spheroid, although the qualifying words "of revolution" are usually dropped. An ellipsoid that is not an ellipsoid of revolution is called a triaxial ellipsoid. Spheroid and ellipsoid are used interchangeably in this article, with oblate implied if not stated.
By the end of the century, Jean-Baptiste-Joseph Delambre had remeasured and extended the French arc from Dunkirk to the Mediterranean Sea (the meridian arc of Delambre and Méchain). It was divided into five parts by four intermediate determinations of latitude. By combining the measurements together with those for the arc of Peru,
ellipsoid shape parameters were determined and the distance between the Equator and pole along the Paris Meridian was calculated as 5130762toises as specified by the standard toise bar in Paris. Defining this distance as exactly 10000000 m led to the construction of a new standard metre bar as 0.5130762 toises.: 22
In the 19th century, many astronomers and geodesists were engaged in detailed studies of the Earth's curvature along different meridian arcs. The analyses resulted in a great many model ellipsoids such as Plessis 1817, Airy 1830, Bessel 1830, Everest 1830, and Clarke 1866. A comprehensive list of ellipsoids is given under Earth ellipsoid.
The nautical mileEdit
Historically a nautical mile was defined as the length of one minute of arc along a meridian of a spherical earth. An ellipsoid model leads to a variation of the nautical mile with latitude. This was resolved by defining the nautical mile to be exactly 1,852 metres. However, for all practical purposes, distances are measured from the latitude scale of charts. As the Royal Yachting Association says in its manual for day skippers: "1 (minute) of Latitude = 1 sea mile", followed by "For most practical purposes distance is measured from the latitude scale, assuming that one minute of latitude equals one nautical mile".
On a sphere, the meridian arc length is simply the circular arc length.
On an ellipsoid of revolution, for short meridian arcs, their length can be approximated using the Earth's meridional radius of curvature and the circular arc formulation.
For longer arcs, the length follows from the subtraction of two meridian distances, the distance from the equator to a point at a latitude φ.
This is an important problem in the theory of map projections, particularly the transverse Mercator projection.
The main ellipsoidal parameters are, a, b, f, but in theoretical work it is useful to define extra parameters, particularly the eccentricity, e, and the third flatteningn. Only two of these parameters are independent and there are many relations between them:
Even though latitude is normally confined to the range [−π/2,π/2], all the formulae given here apply to measuring distance around the complete meridian ellipse (including the anti-meridian). Thus the ranges of φ, β, and the rectifying latitude μ, are unrestricted.
The calculation (to arbitrary precision) of the elliptic integrals and approximations are also discussed in the NIST handbook. These functions are also implemented in computer algebra programs such as Mathematica and Maxima.
The above integral may be expressed as an infinite truncated series by expanding the integrand in a Taylor series, performing the resulting integrals term by term, and expressing the result as a trigonometric series. In 1755, Leonhard Euler derived an expansion in the third eccentricity squared.
In 1825, Bessel derived an expansion of the meridian distance in terms of the parametric latitude β in connection with his work on geodesics,
Because this series provides an expansion for the elliptic integral of the second kind, it can be used to write the arc length in terms of the geographic latitude as
The above series, to eighth order in eccentricity or fourth order in third flattening, provide millimetre accuracy. With the aid of symbolic algebra systems, they can easily be extended to sixth order in the third flattening which provides full double precision accuracy for terrestrial applications.
Delambre and Bessel both wrote their series in a form that allows them to be generalized to arbitrary order. The coefficients in Bessel's series can expressed particularly simply
and k!! is the double factorial, extended to negative values via the recursion relation: (−1)!! = 1 and (−3)!! = −1.
The coefficients in Helmert's series can similarly be expressed generally by
The factor (1 − 2k)(1 + 2k) results in poorer convergence of the series in terms of φ compared to the one in β.
The trigonometric series given above can be conveniently evaluated using Clenshaw summation. This method avoids the calculation of most of the trigonometric functions and allows the series to be summed rapidly and accurately. The technique can also be used to evaluate the difference m(φ1) − m(φ2) while maintaining high relative accuracy.
Substituting the values for the semi-major axis and eccentricity of the WGS84 ellipsoid gives
where φ(°) = φ/1° is φ expressed in degrees (and similarly for β(°)).
On the ellipsoid the exact distance between parallels at φ1 and φ2 is m(φ1) − m(φ2). For WGS84 an approximate expression for the distance Δm between the two parallels at ±0.5° from the circle at latitude φ is given by
A quarter meridian or Earth quadrant.
The distance from the equator to the pole, the quarter meridian (analogous to the quarter-circle), also known as the Earth quadrant, is
The inverse meridian problem for the ellipsoidEdit
In some problems, we need to be able to solve the inverse problem: given m, determine φ. This may be solved by Newton's method, iterating
until convergence. A suitable starting guess is given by φ0 = μ where
is the rectifying latitude. Note that it there is no need to differentiate the series for m(φ), since the formula for the meridian radius of curvature M(φ) can be used instead.
Alternatively, Helmert's series for the meridian distance can be reverted to give
Similarly, Bessel's series for m in terms of β can be reverted to give
Adrien-Marie Legendre showed that the distance along a geodesic on an spheroid is the same as the distance along the perimeter of an ellipse. For this reason, the expression for m in terms of β and its inverse given above play a key role in the solution of the geodesic problem with m replaced by s, the distance along the geodesic, and β replaced by σ, the arc length on the auxiliary sphere. The requisite series extended to sixth order are given by Charles Karney, Eqs. (17) & (21), with ε playing the role of n and τ playing the role of μ.
^Russo, Lucio (2004). The Forgotten Revolution. Berlin: Springer. p. 273-277.
^Torge, W.; Müller, J. (2012). Geodesy. De Gruyter Textbook. De Gruyter. p. 5. ISBN 978-3-11-025000-8. Retrieved 2021-05-02.
^Poynting, John Henry; Joseph John Thompson (1907). A Textbook of Physics, 4th Ed. London: Charles Griffin & Co. p. 20.
^Victor F., Lenzen; Robert P. Multauf (1964). "Paper 44: Development of gravity pendulums in the 19th century". United States National Museum Bulletin 240: Contributions from the Museum of History and Technology reprinted in Bulletin of the Smithsonian Institution. Washington: Smithsonian Institution Press. p. 307. Retrieved 2009-01-28.
^Isaac Newton: Principia, Book III, Proposition XIX, Problem III, translated into English by Andrew Motte. A searchable modern translation is available at 17centurymaths. Search the following pdf file for 'spheroid'.
^ abcClarke, Alexander Ross (1880). Geodesy. Oxford: Clarendon Press. OCLC 2484948.. Freely available online at Archive.org and Forgotten Books (ISBN 9781440088650). In addition the book has been reprinted by Nabu Press (ISBN 978-1286804131), the first chapter covers the history of early surveys.
^Clarke, Alexander Ross; James, Henry (1866). Comparisons of the standards of length of England, France, Belgium, Prussia, Russia, India, Australia, made at the Ordnance survey office, Southampton. London: G.E. Eyre and W. Spottiswoode for H.M. Stationery Office. pp. 281–87. OCLC 906501. Appendix on Figure of the Earth.
^Hopkinson, Sara (2012). RYA day skipper handbook - sail. Hamble: The Royal Yachting Association. p. 76. ISBN 9781-9051-04949.
^Rapp, R, (1991): Geometric Geodesy, Part I, §3.5.1, pp. 28–32.
^Osborne, Peter (2013), The Mercator Projections, doi:10.5281/zenodo.35392 Section 5.6. This reference includes the derivation of curvature formulae from first principles and a proof of Meusnier's theorem. (Supplements: Maxima files and Latex code and figures)
^F. W. J. Olver, D. W. Lozier, R. F. Boisvert, and C. W. Clark, editors,
2010, NIST Handbook of Mathematical Functions (Cambridge
^Maxima, 2009, A computer algebra system, version 5.20.1.
^Euler, L. (1755). "Élémens de la trigonométrie sphéroïdique tirés de la méthode des plus grands et plus petits" [Elements of spheroidal trigonometry taken from the method of maxima and minima]. Mémoires de l'Académie Royale des Sciences de Berlin 1753 (in French). 9: 258–293. Figures.
^ abDelambre, J. B. J. (1799): Méthodes Analytiques pour la Détermination d'un Arc du Méridien; précédées d'un mémoire sur le même sujet par A. M. Legendre, De L'Imprimerie de Crapelet, Paris, 72–73
^Bessel, F. W. (1837). "Bestimmung der Axen des elliptischen Rotationssphäroids, welches den vorhandenen Messungen von Meridianbögen der Erde am meisten entspricht" [Estimation of the axes of the ellipsoid through measurements of the meridian arc]. Astronomische Nachrichten (in German). 14 (333): 333–346. Bibcode:1837AN.....14..333B. doi:10.1002/asna.18370142301.
^Helmert, F. R. (1880): Die mathematischen und physikalischen Theorieen der höheren Geodäsie, Einleitung und 1 Teil, Druck und Verlag von B. G. Teubner, Leipzig, § 1.7, pp. 44–48. English translation (by the Aeronautical Chart and Information Center, St. Louis) available at doi:10.5281/zenodo.32050
^Krüger, L. (1912): Konforme Abbildung des Erdellipsoids in der Ebene. Royal Prussian Geodetic Institute, New Series 52, page 12
^J. W. Hager, J.F. Behensky, and B.W. Drew, 1989. Defense Mapping Agency Technical Report TM 8358.2. The universal grids: Universal Transverse Mercator (UTM) and Universal Polar Stereographic (UPS)
^A guide to coordinate systems in Great Britain, Ordnance Survey of Great Britain.
^ abcBessel, F. W. (2010). "The calculation of longitude and latitude from geodesic measurements (1825)". Astron. Nachr. 331 (8): 852–861. arXiv:0908.1824. Bibcode:2010AN....331..852K. doi:10.1002/asna.201011352. S2CID 118760590. English translation of Astron. Nachr. 4, 241–254 (1825), §5.
^Kawase, K. (2011): A General Formula for Calculating Meridian Arc Length and its Application to Coordinate Conversion in the Gauss-Krüger Projection, Bulletin of the Geospatial Information Authority of Japan, 59, 1–13