Mill Street Stone Arch Bridge

Summary

The Mill Street Stone Arch Bridge is located on that street in Pine Hill, New York, United States. It is a small bridge over a local creek built around the turn of the 20th century. It is one of two stone arch bridges in the former village built by local stonemason Matthew G. Thompson. It has remained intact and in use since then, and was listed on the National Register of Historic Places in 1996. It is located in the Pine Hill Historic District.

Mill Street Stone Arch Bridge
A brown and gray stone arch bridge just above a small cascade in a narrow creek with grass on one side and trees on the other. At the right is a blue-and-gold historical marker
Bridge from east, 2008
Coordinates42°8′1″N 74°28′58″W / 42.13361°N 74.48278°W / 42.13361; -74.48278
CarriesMill Street
CrossesBirch Creek
LocalePine Hill, NY, USA
Maintained byTown of Shandaken
Heritage statusNRHP #96001439
Characteristics
DesignArch bridge
MaterialStone
Total length12 feet (3.7 m)[1]
No. of spans1
Clearance below7 feet (2.1 m)[1]
History
Constructed byMatthew G. Thompson
Construction end1897
Location
Map

It is located on Mill Street just south of where it splits off from Bonnie View Avenue. The bridge is 12 feet (3.7 m) in length with its arch 7 feet (2.1 m) above the creek's waters. The neighborhood is residential and wooded. It is roughly 800 feet (240 m) west of the very similar Elm Street Stone Arch Bridge.[1]

Structurally, the bridge is a 12-foot–long (4 m) arch 7 feet (2.1 m) above the creek level, carrying the paved street. It is built of locally quarried stone using rough voussoirs with a central keystone, anchored in abutments of larger stone courses dressed to allow for tight mortar joints. The spandrel walls are of random coursed stone mortared in place.[1]

In 1897 the Shandaken Town Board approved the construction of the two bridges in Pine Hill. Three years later it hired local mason Matthew G. Thompson to build the bridge for $208 ($7,600 in contemporary dollars[2]). He employed construction techniques dating to the early 18th century, in which the abutments were built first on a small span, followed by a temporary wooden centering to support the arch. Its interior would be filled with earth or stone, and often waterproofed with coal tar or mortar on the inside of the stonework. On the exterior joints packed as tightly as possible prior to mortaring. The centering would be left in place until the mortar had completely set, which could take weeks.[1]

It is not known when Thompson completed the bridge. It has remained intact and unaltered since its original construction, and is currently maintained by the town.[1]

See also edit

References edit

  1. ^ a b c d e f "Cultural Resource Information System (CRIS)". New York State Office of Parks, Recreation and Historic Preservation. Archived from the original (Searchable database) on 2019-04-04. Retrieved 2016-09-01. Note: This includes Bonafide, John (July 1996). "National Register of Historic Places Registration Form: Mill Street Stone Arch Bridge" (PDF). Retrieved 2016-09-01. and Accompanying photographs
  2. ^ 1634–1699: McCusker, J. J. (1997). How Much Is That in Real Money? A Historical Price Index for Use as a Deflator of Money Values in the Economy of the United States: Addenda et Corrigenda (PDF). American Antiquarian Society. 1700–1799: McCusker, J. J. (1992). How Much Is That in Real Money? A Historical Price Index for Use as a Deflator of Money Values in the Economy of the United States (PDF). American Antiquarian Society. 1800–present: Federal Reserve Bank of Minneapolis. "Consumer Price Index (estimate) 1800–". Retrieved February 29, 2024.