Modular Equipment Transporter


Alan Shepard stands next to the Modular Equipment Transporter during the 1971 Apollo 14 mission

The Modular Equipment Transporter (MET) was a two-wheeled, hand-pulled vehicle that was used as an equipment hauling device on traverses across the lunar surface. Designed after Apollo 12 astronauts Pete Conrad and Alan Bean had difficulties lugging their equipment significant distances to and from their Lunar Module, the MET primarily functioned as a portable workbench with a place for hand tools and their carrier, cameras, spare camera magazines, rock sample bags, environmental sample containers, and the portable magnetometer with its sensor and tripod.[1] It was carried on the 1971 Apollo 14 mission and was planned to be used on Apollo 15, but was used only on Apollo 14 since Apollo 15's mission was changed to be the first to employ the motorized Lunar Roving Vehicle, which transported both astronauts and equipment.

Astronauts nicknamed the MET "the rickshaw". It was pulled using a pulling bar in the front. The majority of the payload of the MET consisted of part of the Apollo Lunar Surface Experiments Package (ALSEP).,[2] including a portable magnetometer, as well as various tools and space to transport samples. The performance of the MET was described as "adequate".[3] In fact, astronauts Alan Shepard and Edgar Mitchell were disappointed by the MET's performance. During one of the traverses they had to carry the MET together because it was too difficult to pull the MET through the rough lunar terrain.

The two nitrogen-filled rubber tires on the MET were the first tires on the Moon. They were designed by Goodyear Tire and Rubber Company and called Experimental Lunar Tires (XLTs). The biggest challenge for Goodyear was NASA specifications required that the inner tube be inflated to 1.5 psi on the Moon surface-a difficult task. A tire with 1.5 psi on Earth has an inflation pressure of 16.2 psi on the Moon because atmospheric pressure (14.7 psi) isn't a factor there. Goodyear solved the gauge pressure problem by having NASA partially inflate the inner tube with nitrogen so that on the Moon it reached 1.5 psi. The tire maker gave the synthetic rubber tube a special coating to improve gas retention. These tires worked well for the small MET rickshaw. The later Lunar Roving Vehicle demanded wheels or tires that could handle a much greater weight and could travel much farther than the MET. NASA went with General Motors and they designed a wire-mesh wheel that didn't allow lunar dust to get stuck in the wheels.[4]

Design criteria

Data from Operator's Manual By General Electric[5]

Dimensional limits

  • Max. MET Weight (Empty): 30 Earth lbs
  • Max. Payload Capability: 340 Earth lbs
  • Workable height: 30 in
  • Stowage Envelope: 28" x 36" x 8"

Operation specifications

  • Nominal Pulling Speed: 4-7 mph
  • Nominal Draw Bar Pull: 3-5 mph
  • Design Traverse 20,000 ft
  • Capable of Traversing: up to 4" Diameter Rocks
  • Tire Temperatures:
    • -60 °F on deployment
    • 0 °F to 200 °F when parked
    • 70 °F average when rolling
  • Tire Pressure: 1.5 psia

Items stowed on MET

Data from Operator's Manual by General Electric[5]

Stowed Item # Items Stowed Quantity Lunar Module Stowage/Code
1 Camera/Power Pack (16 mm) 1 (on tool carrier) Ascent: A4
2 Magazine (16 mm) 3 (1 in camera) Ascent: A4
3 Camera (70 mm Hasselblad) 1 Ascent: F2B
4 Magazine (70 mm) 3 (1 in camera) Ascent: F2B
5 Handle (70 mm) 1 Ascent: F2B
6 Trigger (70 mm) 1 Ascent: F2B
7 RCU/70 mm Bracket 1 Ascent: F9A
8 Camera Assembly 1 Descent: M1R
9 Magazine Assembly 2 (1 in camera) Descent: M1F
10 Magazine Assembly Cover 1 Descent: M1F
11 RCU/LGEC Bracket 1 Descent
12 Camera (Close-up/stereo) 1 Descent:M1N
13 Weigh Bags 4 Descent: M1P
14 Trenching Tool 1 Descent: M1W
15 Special Environment Sample Container 2 Descent: M1P
16 Portable Magnetometer: *Tripod & Sensor*Cable Reel*Electronics Package 1 Descent: Adjacent Sequence Bay
17 ALHTC 1 Descent: ALSEP
18 Camera Staff 1 Descent: ALSEP
19 Hammer 1 Descent: M1K
20 Scoop 1 Descent: M1M
21 Lens/Brush 1 Descent: ALSEP
22 Tongs 1 Descent: M1H
23 Extension Handle 5 Descent: M1G
24 Core Tubes 2 Descent: 1 in SRC
25 35 Bag Dispenser 1 Descent: M1T
26 Penetrometer 1 Descent: ALSEP
27 Gnomon 1 Descent: M1A
27A Color Chart and Traverse Map 1 EA Descent: ALSEP
Line drawing of the Modular Equipment Transporter.


  1. ^ MODULAR EQUIPMENT TRANSPORTER OPERATOR'S FAMILIARIZATION MANUAL (PDF). Houston, Texas: GENERAL ELECTRIC. April 27, 1970. p. 2. Retrieved 1 December 2014.
  2. ^ Shepard, Alan; Armstrong, Deke Slayton with Jay Barbree; introduction by Neil (2011). Moon shot : the inside story of America's Apollo moon landings (Revised ed.). Open Road. ISBN 978-1-4532-5826-2.
  3. ^ Lunar surface experiments, Houston, Texas: NASA Manned Spacecraft Center, April 1971, archived from the original on 2011-10-24
  4. ^ . Retrieved 30 March 2019
  5. ^ a b MODULAR EQUIPMENT TRANSPORTER OPERATOR'S FAMILIARIZATION MANUAL (PDF). Houston, Texas: GENERAL ELECTRIC. April 27, 1970. p. 1. Retrieved 1 December 2014.