Octamethylcyclotetrasiloxane, also called D4, is an organosilicon compound with the formula [(CH3)2SiO]4. It is a colorless viscous liquid. It is a common cyclomethicone. It is widely used in cosmetics.[5]
Names | |
---|---|
Preferred IUPAC name
Octamethyl-1,3,5,7,2,4,6,8-tetroxatetrasilocane | |
Other names
| |
Identifiers | |
| |
3D model (JSmol)
|
|
ChEBI |
|
ChemSpider |
|
ECHA InfoCard | 100.008.307 |
EC Number |
|
PubChem CID
|
|
UNII |
|
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
[(CH3)2SiO]4 | |
Molar mass | 296.616 g·mol−1 |
Density | 0.956 g/mL |
Melting point | 17–18 °C (63–64 °F; 290–291 K) |
Boiling point | 175–176 °C (347–349 °F; 448–449 K) |
56.2±2.5 ppb (23 °C)[1] | |
log P | 6.98±0.13[2] |
Vapor pressure | 124.5±6.2 Pa (25 °C)[3] |
Hazards | |
GHS labelling: | |
[4] | |
Warning | |
H361f, H410 M=10[4] | |
Related compounds | |
Related compounds
|
|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references
|
Commercially D4 is produced from dimethyldichlorosilane. Hydrolysis of the dichloride produces a mixture of cyclic dimethylsiloxanes and polydimethylsiloxane. From this mixture, the cyclic siloxanes including D4 can be removed by distillation. In the presence of a strong base such as KOH, the polymer/ring mixture is equilibrated, allowing complete conversion to the more volatile cyclic siloxanes:[5]
D4 and D5 are also precursors to the polymer. The catalyst is again KOH.
It is among the most important of all the cyclic siloxanes, with a global production volume of 136 million kilograms in 1993.[6] 100,000–1,000,000 tonnes per year of D4 is manufactured and/or imported in the European Economic Area.[7]
D4 is of low acute toxicity. The LC50 for a single four hour inhalation exposure in rats is 36 mg/L. The oral LD50 in rats is above 4800 mg/kg and the dermal LD50in rats is above 2400 mg/kg.[8]
As the smallest cyclic dimethylsiloxane that does not experience considerable ring strain,[9] D4 is one of the most abundant siloxanes in the environment, e.g. in landfill gases.[10] D4 and D5 have attracted attention because they are pervasive. Cyclic siloxanes can be detected in some species of aquatic life.[11] An independent, peer-reviewed study in the US found "negligible risk from D4 to organisms"[12] while a scientific assessment by the Australian government stated, "the direct risks to aquatic life from exposure to these chemicals at expected surface water concentrations are not likely to be significant."[13]
In the European Union, D4 was characterized as a substance of very high concern (SVHC) due to its PBT and vPvB properties and was thus included in the candidate list for authorisation.[14][clarification needed] D4 shall not be placed on the market in wash-off cosmetic products in a concentration equal to or greater than 0.1% by weight of either substance, after 31 January 2020.[15] Conversely, a detailed review and analysis of the science by the State of Washington in 2017 led to the removal of D4 from their CHCC listing.[16][clarification needed] That decision prompted the State of Oregon to follow suit in 2018.[17]
{{cite journal}}
: CS1 maint: multiple names: authors list (link)