Microsoft Office 2010 provides read support for ECMA-376, read/write support for ISO/IEC 29500 Transitional, and read support for ISO/IEC 29500 Strict.Microsoft Office 2013 and Microsoft Office 2016 additionally support both reading and writing of ISO/IEC 29500 Strict. While Office 2013 and onward have full read/write support for ISO/IEC 29500 Strict, Microsoft has not yet implemented the strict non-transitional, or original standard, as the default file format yet due to remaining interoperability concerns.
In 2000, Microsoft released an initial version of an XML-based format for Microsoft Excel, which was incorporated in Office XP. In 2002, a new file format for Microsoft Word followed. The Excel and Word formats—known as the Microsoft Office XML formats—were later incorporated into the 2003 release of Microsoft Office.
Microsoft announced in November 2005 that it would co-sponsor standardization of the new version of their XML-based formats through Ecma International as "Office Open XML". The presentation was made to Ecma by Microsoft's Jean Paoli and Isabelle Valet-Harper.
Microsoft submitted initial material to Ecma International Technical Committee TC45, where it was standardized to become ECMA-376, approved in December 2006.
This standard was then fast-tracked in the Joint Technical Committee 1 of ISO and IEC. After initially failing to pass, an amended version of the format received the necessary votes for approval as an ISO/IEC Standard as the result of a JTC 1 fast-tracking standardization process that concluded in April 2008. The resulting four-part International Standard (designated ISO/IEC 29500:2008) was published in November 2008 and can be downloaded from the ITTF. A technically equivalent set of texts is published by Ecma as ECMA-376 Office Open XML File Formats—2nd edition (December 2008); they can be downloaded from their web site.
The ISO/IEC standardization of Office Open XML was controversial and embittered, with much discussion both about the specification and about the standardization process. According to InfoWorld, "OOXML was opposed by many on grounds it was unneeded, as software makers could use OpenDocument Format (ODF), a less complicated office software format that was already an international standard." The same InfoWorld article reported that IBM (which supports the ODF format) threatened to leave standards bodies that it said allow dominant corporations like Microsoft to wield undue influence. The article further says that Microsoft was accused of co-opting the standardization process by leaning on countries to ensure that it got enough votes at the ISO/IEC for Office Open XML to pass, although it does not specify exactly who accused Microsoft.
Under the Ecma International code of conduct in patent matters, participating and approving member organizations of ECMA are required to make available their patent rights on a reasonable and non-discriminatory (RAND) basis.
Holders of patents which concern ISO/IEC International Standards may agree to a standardized license governing the terms under which such patents may be licensed, in accord with the ISO/IEC/ITU common patent policy.
Microsoft, the main contributor to the standard, provided a covenant not to sue for its patent licensing. The covenant received a mixed reception, with some like the Groklawblog criticizing it, and others such as Lawrence Rosen, (an attorney and lecturer at Stanford Law School), endorsing it.
Microsoft irrevocably promises not to assert any Microsoft Necessary Claims against you for making, using, selling, offering for sale, importing or distributing any implementation to the extent it conforms to a Covered Specification […]
This is limited to applications which do not deviate from the ISO/IEC 29500:2008 or Ecma-376 standard and to parties that do not "file, maintain or voluntarily participate in a patent infringement lawsuit against a Microsoft implementation of such Covered Specification".
The Open Specification Promise was included in documents submitted to ISO/IEC in support of the ECMA-376 fast-track submission.
Ecma International asserted that, "The OSP enables both open source and commercial software to implement [the specification]".
The Office Open XML specification exists in several versions.
ECMA-376 1st edition (2006)Edit
The ECMA standard is structured in five parts to meet the needs of different audiences.
Part 1. Fundamentals
Vocabulary, notational conventions and abbreviations
Summary of primary and supporting markup languages
Conformance conditions and interoperability guidelines
Constraints within the Open Packaging Conventions that apply to each document type
Part 2. Open Packaging Conventions
The Open Packaging Conventions (OPC), for the package model and physical package, is defined and used by various document types in various applications from multiple vendors.
It defines core properties, thumbnails, digital signatures, and authorizations & encryption capabilities for parts or all of the contents in the package.
XML schemas for the OPC are declared as XML Schema Definitions (XSD) and (non-normatively) using RELAX NG (ISO/IEC 19757-2)
Part 3. Primer
Informative (non-normative) introduction to WordprocessingML, SpreadsheetML, PresentationML, DrawingML, VML and Shared MLs, providing context and illustrating elements through examples and diagrams
Describes the custom XML data-storing facility within a package to support integration with business data
Part 4. Markup Language Reference
Contains the reference material for WordprocessingML, SpreadsheetML, PresentationML, DrawingML, Shared MLs and Custom XML Schema, defining every element and attribute including the element hierarchy (parent/child relationships)
XML schemas for the markup languages are declared as XSD and (non-normatively) using RELAX NG
Defines the custom XML data-storing facility
Part 5. Markup Compatibility and Extensibility
Describes extension facilities of OpenXML documents and specifies elements & attributes through which applications can operate across different extensions.
Later versions of the ECMA-376 standard are aligned and technically equivalent to the corresponding ISO standard.
The ISO/IEC standard is structured into four parts: Parts 1, 2 and 3 are independent standards; for example, Part 2, specifying Open Packaging Conventions, is used by other file formats including XPS and Design Web Format. Part 4 is to be read as a modification to Part 1, which it requires.
A technically equivalent set of texts is also published by Ecma as ECMA-376 2nd edition (2008).
Part 1. Fundamentals & Markup Language Reference
Consisting of 5560 pages, this part contains:
Reference material for the XML document markup languages defined by the Standard
XML schemas for the document markup languages declared using XSD and (non-normatively) RELAX NG
Defines the foreign markup facilities
Part 2. Open Packaging Conventions
Consisting of 129 pages, this part contains:
A description of the Open Packaging Conventions (package model, physical package)
Legacy material such as compatibility settings and the graphics markup language VML
A list of syntactic differences between this text and ECMA-376 1st Edition
The standard specifies two levels of document & application conformance, strict and transitional, for each of WordprocessingML, PresentationML and SpreadsheetML, and also specifies applications' descriptions of base and full.
Compatibility between versionsEdit
The intent of the changes from ECMA-376 1st Edition to ISO/IEC 29500:2008 was that a valid ECMA-376 document would also be a valid ISO 29500 Transitional document; however, at least one change introduced at the BRM—refusing to allow further values for xsd:boolean—had the effect of breaking backwards-compatibility for most documents. A fix for this had been suggested to ISO/IEC JTC1/SC34/WG4, and was approved in June 2009 as a recommendation for the first revision to Office Open XML.
Applications capable of reading documents compliant to ECMA-376 Edition 1 would regard ISO/IEC 29500-4 Transitional documents containing ISO 8601 dates as corrupt.
Some older versions of Microsoft Word and Microsoft Office are able to read and write .docx files after installation of the free compatibility pack provided by Microsoft, although some items, such as equations, are converted into images that cannot be edited.
Starting with Microsoft Office 2007, the Office Open XML file formats have become the default file format of Microsoft Office. However, due to the changes introduced in the Office Open XML standard, Office 2007 is not wholly in compliance with ISO/IEC 29500:2008.Office 2010 includes support for opening documents of the ISO/IEC 29500:2008-compliant version of Office Open XML, but it can only save documents conforming to the transitional, not the strict, schemas of the specification. Note that the intent of the ISO/IEC is to allow the removal of the transitional variant from the ISO/IEC 29500 standard.
The ability to read and write Office Open XML format is, however, not limited to Microsoft Office; other office products are also able to read & write this format:
Collabora Online for Online, Mobile and Desktop apps are able to open and save Office Open XML files.
SoftMaker Office 2010 is able to read and write DOCX and XLSX files in its word processor & spreadsheet applications.
OpenOffice.org and Apache OpenOffice from version 3.0 has been able to import Office Open XML files, but not save them. Version 3.2 improved this feature with read support even for password-protected Office Open XML files.
The Go-oo fork of OpenOffice could also write OOXML files.
KOffice from version 2.2 and later was able to import OOXML files.
^"Re-introducing on/off-values to ST-OnOff in OOXML Part 4". Retrieved 2009-09-29.
^"OOXML and Office 2007 Conformance: a Smoke Test". Archived from the original on 2010-04-28. Retrieved 2009-09-29.
^"Minutes of the Copenhagen Meeting of ISO/IEC JTC1/SC34/WG4" (PDF). 2009-06-22. Archived from the original (PDF) on 2014-05-12. Retrieved 2009-09-29. page 15
^"ISO/IEC 29500-4:2008/Draft Amd2:2011 - Draft - Information technology — Document description and processing languages — Office Open XML File Formats — Part 4: Transitional Migration Features - AMENDMENT 2". 2011-03-02. Archived from the original (PDF) on 2014-05-12. Retrieved 2011-04-04.
^"Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats (Version 3)". Microsoft. 2007-06-18. Retrieved 2018-06-23.
^Open a Word 2007 document in an earlier version of Word - Word - Office.com. Office.microsoft.com. Retrieved on 2013-07-17.
^"Microsoft Expands List of Formats Supported in Microsoft Office". Microsoft. Retrieved 2008-05-21.
^"Microsoft's future lies somewhere beyond the Vista by Evansville Courier & Press". Courierpress.com. Archived from the original on 2014-07-10. Retrieved 2009-05-19.
^"Rivals Set Their Sights on Microsoft Office: Can They Topple the Giant? - Knowledge@Wharton". Knowledge.wharton.upenn.edu. Retrieved 2009-05-19.
^Andy Updegrove (21 May 2008). "Microsoft Office 2007 to Support ODF — and not OOXML". ConsortiumInfo.org. Retrieved 2009-05-19.
^"ISO OOXML convener: Microsoft's format "heading for failure"". Ars Technica. 2 April 2010.
^ abBrown, Alex (31 March 2010). "Microsoft Fails the Standards Test". Where is an end of it?. Alex Brown's weblog. Retrieved 23 June 2018.
Brown, Alex (31 March 2010). "Microsoft Fails the Standards Test". Where is an end of it?. Alex Brown's weblog. Retrieved 23 June 2018.
Lenz, Evan; McRae, Mary; St.Laurent, Simon (May 2004). "Chapter 2: The WordprocessingML Vocabulary" (PDF). Office 2003 XML: Integrating Office with the Rest of the World. O'Reilly Media. ISBN 978-0-596-00538-2.
"How do I open Microsoft Office 2007 files?". OpenOffice.org Wiki. Oracle. 7 September 2009. Retrieved 21 October 2010.
"Reference and sample documents". OpenOffice.org Ninja. 8 December 2008. Archived from the original on 24 October 2010. Retrieved 21 October 2010.
Shah, Rajiv C.; Kesan, Jay P. (September 2008). "Lost in Translation: Interoperability Issues for Open Standards - ODF and OOXML as Examples". Social Science Research Network. Social Science Electronic Publishing, Inc. SSRN1201708.