OpenEVSE Knowpia

OpenEVSE is an Arduino-based charging station created by Christopher Howell and Sam C. Lin.^[1] The charger is composed of open-source software^[2] and hardware which can be made by individuals.^[3]

The project started in February 2011^[4]^[1] with an experiment to try to generate the SAE J1772 pilot signal^[5] on an Arduino-compatible ATmega328 8-Bit AVR MCU. One experiment led to another until a prototype J1772-compatible controller was born. Today, OpenEVSE powers charging stations from many manufacturers all over the world.^[6]

References edit

^ ^a ^b OpenEVSE About page
^ OpenEVSE at github
^ Software and hardware needed to build the OpenEVSE charger
^ "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 2019-09-09.
^ "openEVSE - openalia". Retrieved 2019-05-01.
^ "MEP EP #162: Electric Vehicle Charging And Cat Safety MacroFab Engineering podcast". player.fm. 6 March 2019. Archived from the original on 2019-04-12. Retrieved 2019-04-11.

External links edit

Official website

[about-1] OpenEVSE About page

[2] OpenEVSE at github

[3] Software and hardware needed to build the OpenEVSE charger

[4] "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 2019-09-09.

[5] "openEVSE - openalia". Retrieved 2019-05-01.

[6] "MEP EP #162: Electric Vehicle Charging And Cat Safety MacroFab Engineering podcast". player.fm. 6 March 2019. Archived from the original on 2019-04-12. Retrieved 2019-04-11.

[1]

[2]

[3]

[4]

[5]

[6]

Summary

References edit

External links edit