PharmaSat

Summary

PharmaSat
330070main PreSat Assembly 428-321.jpg
PharmaSat undergoing preflight testing
Mission typeBiological research
OperatorNASA
COSPAR ID2009-028B
SATCAT no.35002
WebsitePharmaSat
Mission duration6 months (planned)
Spacecraft properties
Bus3U CubeSat
ManufacturerNASA Ames Space Center
Launch mass4.5 kg (9.9 lb)
PowerSolar cells and batteries
Start of mission
Launch date19 May 2009, 23:55 UTC[1][2]
RocketMinotaur I
Launch siteMARS, Pad 0B
ContractorOrbital Sciences
End of mission
Decay date14 August 2012
Orbital parameters
Reference systemGeocentric orbit[3]
RegimeLow Earth orbit
Perigee altitude428 km (266 mi)
Apogee altitude466 km (290 mi)
Inclination40.4°
Period93.52 minutes
 

PharmaSat was a nanosatellite developed by NASA Ames Research Center which measured the influence of microgravity upon yeast resistance to an antifungal agent. As a follow on to the GeneSat-1 mission, the Ames Small Spacecraft Division conducted the PharmaSat mission in collaboration with industry and local universities.[4]

PharmaSat was the first nanosatellite to implement biological science guided by its Principal Investigator. The mission was designed to aid the development of medicines or techniques to enable long-term manned space travel and habitation.

Background

The PharmaSat mission builds upon technology demonstrated by GeneSat-1, which used a CubeSat to study microfluidics and optics in the space environment. It was designed to provide life-support, growth, monitoring, and analysis capabilities for microorganisms.

Based, like GeneSat-1, around a three-unit CubeSat platform; PharmaSat was designed to accomplish five functions in an autonomous free-flying platform:[4]

  1. Provide life support and environmental control for growth of the yeast strain in 48 independent microwells;
  2. Dose the growing yeast with antifungal agent at the appropriate point on the growth curve with three distinct, well-defined dosage levels, plus a zero-dose control;
  3. Track the population of the yeast via optical density of each microwell before, during and after antifungal administration;
  4. Determine well-by-well yeast viability at multiple, well-defined times after antifungal administration using a colorimetric reagent, Alamar Blue;
  5. Telemeter the resulting population and viability data to Earth, along with system status data.

Operations

PharmaSat was launched at 23:55 UTC on 19 May 2009 aboard a Minotaur I launch vehicle from Pad 0B at the Mid-Atlantic Regional Spaceport on Wallops Island. PharmaSat was flown as a secondary payload co-manifested with the US Air Force Air Force Research Laboratory's TacSat-3 spacecraft.

PharmaSat was successfully inserted into a low Earth orbit at approximately 459 km (285 mi) above the Earth, following which it was activated and began transmitting radio signals to two ground control stations. The primary ground station at SRI International in Menlo Park, California, transmitted mission data from the satellite to its operators, while a second station was located at Santa Clara University, whose Robotic Systems Laboratory was responsible for operating the satellite.

After establishing contact the satellite was commanded to initiate its experiment, which lasted 96 hours. Once the experiment began, PharmaSat relayed data in near real-time for up to six months.[5] PharmaSat also carried an amateur radio beacon, with a frequency of 437.465 megahertz, which broadcast spacecraft telemetry. Amateur radio operators were asked to collect data from the spacecraft and provide it to the operators via the Mission Dashboard website.[6]

PharmaSat decayed from orbit and reentered the atmosphere on 14 August 2012.

See also

References

  1. ^ "Minotaur launch delayed again". Retrieved 11 May 2009.
  2. ^ "Launch Log". Jonathan's Space Report. Retrieved 3 January 2014.
  3. ^ "Satellite Catalog". Jonathan's Space Report. Retrieved 3 January 2014.
  4. ^ a b "PharmaSat Nanosatellite" (PDF). 1 April 2009. Retrieved 15 October 2021. Public Domain This article incorporates text from this source, which is in the public domain.
  5. ^ https://www.scu.edu/engineering/labs--research/labs/robotics-systems-lab/
  6. ^ "Archived copy". Archived from the original on 3 May 2009. Retrieved 3 May 2009.CS1 maint: archived copy as title (link)