PhotoModeler[1] is a software application that performs image-based modeling and close range photogrammetry – producing 3D models and measurements from photography. The software is used for close-range, aerial and uav photogrammetry.
Developer(s) | Eos Systems Inc. |
---|---|
Initial release | 1994 |
Operating system | Microsoft Windows |
Type | Photogrammetry |
License | Proprietary commercial software |
Website | www |
Close Range Photogrammetry (CRP) can mean photographs taken from the ground with a handheld camera, or taken from a UAV/drone at a relatively low altitude. PhotoModeler and CRP are used for performing measurement and modeling in agriculture, archaeology, architecture, biology, engineering, fabrication, film production, forensics, mining, stockpile volumes, etc.[2][3][4]
1) Take photos from different angles: Ensure that many images are taken to capture the entire object. The amount of required images varies accordingly to the size and complexity of the object being captured.
2) Load images into Photomodeler software: Upload the images by any means on to the computer.
3) Chose the method: Chose one amongst the four following options.
4) Review, measure, and export
Some of the applications of PhotoModeler are:
Notes