Summary
Power-on hours (POH) is the length of time, usually in hours,[1] that electrical power is applied to a device.
A part of the S.M.A.R.T. attributes (originally known as IntelliSafe, before its introduction to the public domain on 12 May 1995, by the computer hardware and software company Compaq),[2]
It is used to predict drive failure, supported by manufacturers such as Samsung, Seagate, Toshiba, IBM (Hitachi), Fujitsu, Maxtor, Kingston and Western Digital.[citation needed]
Power-on hours is intended to indicate a remaining lifetime prediction for hard drives and solid state drives, generally, "the total expected life-time of a hard disk is 5 years" [3] or 43,800 hours of constant use.[4]
Once a drive has surpassed the 43,800 hour mark, it may no longer be classed as in "perfect condition".[citation needed]
Google tested over 100,000 consumer grade serial and parallel ATA hard disks, finding evidence that S.M.A.R.T. attributes like POH played a heavy role in device failures.[5]
References edit
- ^ "ZAR - Quick guide to understanding S.M.A.R.T. information". www.z-a-recovery.com.
...the raw value of the attribute is stored using all sorts of measurement units (hours, half-hours, or ten-minute intervals to name a few) depending on the manufacturer...
- ^ "The Emergence of Reliability-Prediction Technology" (PDF) (Press release). 12 June 2001. Archived from the original (PDF) on 12 June 2001. Retrieved 1 February 2018.
- ^ "S.M.A.R.T. Attribute: Power-On Hours (POH) | Knowledge Base". kb.acronis.com.
- ^ "Power on time". www.hdsentinel.com.
- ^ Pinheiro, Eduardo; Weber, Wolf-Dietrich; Barroso, Luiz André (2007). "Failure Trends in a Large Disk Drive Population": 17–29.
{{cite journal}}: Cite journal requires|journal=(help)