QuickDraw GX was a replacement for the QuickDraw (QD) 2D graphics engine and Printing Manager inside the classic Mac OS. Its underlying drawing platform was a resolution-independent object oriented retained mode system, making it much easier for programmers to perform common tasks (compared to the original QuickDraw). Additionally, GX added various curve-drawing commands that had been lacking from QD, as well as introducing TrueType as its basic font system.
While GX certainly addressed many of the problems QD had, by the time it was available most developers had already developed their own solutions to these problems anyway. GX also suffered from causing a number of incompatibilities in existing programs, notably those that had developed their own QD extensions. This, coupled with opposition from an important fraction of the developer market, especially PostScript owner Adobe, and a lack of communication from Apple about the benefits of GX and why users should adopt it, led to the technology being sidelined.
QuickDraw GX saw little development after its initial release, and was formally "killed" with the purchase of NeXT and the eventual adoption of the Quartz imaging model in Mac OS X. Many of its component features lived on and are now standard in the current Macintosh platform; TrueType GX in particular has, with a few tweaks, become a broadly used modern standard in the form of OpenType Variable Fonts.
As the 80s wore on, QuickDraw's architectural limitations began to impose limits on Apple and third-party developers.
GX appears to have started in a roundabout fashion, originally as an outline font system that would be added to the Mac OS. Included in the font rendering engine were a number of generally useful extensions, notably a fixed point coordinate system and a variety of curve drawing commands. The system also included a system for "wrapping" existing PostScript Type 1 fonts into its own internal format, which added bitmap preview versions for quick on-screen rendering. This project later took on an expanded role when Apple and Microsoft agreed to work together to form an alternative to PostScript fonts, which were extremely expensive, creating the TrueType effort based on Apple's existing efforts.
Another project, apparently unrelated at first, attempted to address problems with the conversion from QuickDraw into various printer output formats. Whereas developers had earlier been forced to write their own code to convert their QuickDraw on-screen display to PostScript for printing, under the new printer architecture such conversions would be provided by the OS. Additionally the new system was deliberately engineered to be as flexible as possible, supporting not only QD and PS printers, but potentially other standards such as Hewlett Packard's PCL as well. The system also supported "desktop printers" (printers that appeared as icons on the user's desktop), a long sought-after feature missing from QD, and added improved printing dialogs and controls.
It is not clear when the projects merged, but this was a common theme in Apple at the time. Middle-managers were involved in an intense turf war for much of the late 1980s and early 1990s, gathering projects together into "über-projects" that contained enough important code to make them "unkillable". Sadly this often delayed the projects dramatically; one component running behind schedule forced the entire collection to be delayed so they could be released "complete". QuickDraw GX was one such victim, and delays and changes of direction in TrueType and other problems greatly delayed the introduction of GX.
Discussions of GX technology started appearing in various trade magazines around 1992, notably Apple's own develop. At the time it appeared release was imminent, perhaps late 1992 or early 1993.
GX was initially released in about January 1994, as a separate package. Version 1.1.1 was bundled with System 7.5 later that year. The system was received with a dull thud. The package was large enough to strain the memory of most existing Macintosh computers of the era, and arguments like "you can now print to PostScript" were less than impressive considering many existing programs had already added such support. Users and developers generally ignored GX, and a "market" for the system simply never appeared.
There appears to be no one reason for GX's failure in the market, but certainly a number of them conspired to lessen its appeal. For one thing, GX was very large, by itself requiring as much memory as the rest of the OS. Speed was also an issue, limiting it to running only on Macs with a Motorola 68020 or better. Given that the installed Mac base at the time still contained large numbers of 68000 based machines like the Mac Plus, these requirements restricted the number of machines it could run on. When it was first released, one review noted "QuickDraw GX isn't for everyone and requires more RAM than many Macs have to spare."
Additionally, the API for the system was very large, filling several books. Implementing a GX program was no easy feat, even though the development was supposed to be much easier. This was not a problem of the GX architecture itself, but a side effect of the "all inclusive" nature of the system — a problem most Apple products of the era suffered from (see PowerTalk for instance). As a result, the developer appeal was limited; a lot of effort would be required to use the system in programs, and the resulting application could only run on a subset of the installed base — let alone the upcoming Windows 95, which was then in the midst of an unprecedented media blitz. The number of GX-based (as opposed to GX-compatible) programs could be counted on one hand, one example Pixar Typestry, another one being Softpress' UniQorn
Additionally, the change in printing systems presented serious real-world issues. While PostScript printing had never been easy, over the years since the release of the original LaserWriter developers had built up a library of solutions to common problems. With the change in architecture for GX, most of these stopped working. New "GX drivers" were needed for printers as well, and Apple didn't supply drivers for all of their own printers, let alone any third-party ones. Printing problems were endemic, and so difficult to fix that users often gave up on the system in frustration.
User uptake of GX was very close to zero, as was the case for most of the new technologies Apple released in the early 1990s. It might have seen widespread use as a part of the Copland project, but Copland never launched. Although Apple continued to state GX was the future of graphics on the Mac, by 1995 it was clear they were no longer "pushing" it, frustrating its supporters.
Mac OS 8 dropped support for the GX printing architecture, though the text management and color management architectures survived. Elements of the text management architecture became part of the TrueType Specification and elements of the color management architecture became part of the International Color Consortium specification. With the advent of Mac OS X, portions of GX live on in Apple Type Services for Unicode Imaging (ATSUI), and in ColorSync, whose file format is identical to the original format developed for GX.
QuickDraw GX is based on an object oriented model in which graphics objects are aware of and responsible for their own state. Unlike QuickDraw, there is no universal "state", every drawing command can re-construct the state from data stored within it, or various "parent" objects. For instance, a programmer could build a
redBox object that first sets the color to red, and then draws a square. From that point on the program no longer has to explicitly set the color before drawing, the GX system itself will always correctly set the drawing color when asked to draw a
redBox, and reset it when finished. Since this state was private, and sent to GX if and when needed, GX theoretically allowed the Mac OS to support protected memory, as state was no longer shared directly between the programs and graphics system.
This contrasts strongly with the original QuickDraw, where the programmer was responsible for all state changes. For instance, if one were to draw a redBox and then a series of lines, the lines would also appear in red unless the programmer explicitly changed the color first. The advantage to this approach is that it minimizes the number of commands needed to set state; the programmer can organize drawing to draw groups of similarly styled objects at the same time and thereby save time. The disadvantage of this approach is that it is easy to "forget" to change state and end up causing problems, so easy that programmers often saved and restored the complete state before every drawing command, thereby potentially lowering performance.
The drawing state under GX was hierarchical. A default drawing mode was created with every window, as it was under QD, and drawing objects with no other state changes would use these defaults. The programmer could then change state in the objects themselves, as in our
redBox example, or alternately change the state of all drawing by setting the state in the window object. GX objects could be easily collected into groups, themselves objects, allowing the state to be set for an entire complex object.
One part of the overall drawing state was the
gxMapping. This was a 3-by-3 matrix which could express arbitrary linear transformations in two dimensions, including perspective distortions. All GX objects had an associated mapping as part of its drawing state, which allowed for things like rotations and translations. Although all of this state was held in the
gxMapping for that object, GX also provided "wrapper" commands like "rotate" to make the API simpler to use.
Unlike QuickDraw, QuickDraw GX allowed for fractional coordinates. However, these were fixed-point values, rather than floating-point. At the time GX was being developed (late 1980s to early 1990s), there was still a significant performance penalty in using floating-point arithmetic.
The GX graphics architecture was built around a number of types of objects which were premade, though a full set of API calls was available for examining and manipulating them:
GX shapes could be of various types:
The typography features of GX were integrated in the form of 3 types of gxShape:
The GX API also provided hit-testing functions, so that for example if the user clicked on a layout shape in the middle of a ligature, or in the region between a change of text direction, GX itself would provide the smarts to determine which character position in the original text corresponded to the click.
An important distinction in GX was drawn between a character and a glyph, a distinction also found in the Unicode Standard. A character was an abstract symbol from the character set of a writing system, such as the letter "f" in the writing systems of the Latin script. Whereas a glyph was a specific graphic shape from a particular font, whether the shape represented a single character or a set of characters. Thus, for example, the Hoefler Text font had glyphs to represent the letters "f" and "l". It also had another glyph to represent the ligature "ﬂ", which could be automatically composed (instead of the individual glyphs) wherever the two abstract characters "f" and "l" occurred in sequence in the source text.
This distinction was important in that such contextual substitutions occurred at rendering time, without any changes to the source character string. Thus they had no impact on editing or searching of the text. PostScript Type 1 font files have one to one mapping only, and as ligatures are many to one mappings, they can not be inserted into the composition without changing the source character string, for instance, the ligature ffi is placed at the position of capital Y in Adobe font products, and "Adobe Offices" is composed by typing "Adobe O" <change font> "Y" <change font> "ces". In the layout the character string is broken, and in PDF made from streamed PostScript the characters f+f+i can only be reconstructed, if the name of the glyph follows a glyph naming list.
Contextual substitutions can be controlled by enabling or disabling the composition options of a TrueType GX font in WorldText on the Mac OS 9 CD or in TextEdit in Mac OS X. Fonts commonly have features called "common ligatures" (such as the "fl" example), "rare ligatures" (such as inscriptional ME and MD ligatures), "archaic non-terminal s" (for automatically substituting the letter "s" with the archaic form that looked more like an "f", except at the ends of words), and even choices between entirely separate sets of glyph designs, such as more and less ornate forms.
The rules for performing contextual substitutions are implemented as state machines built into the font, and interpreted by the LLM Line Layout Manager, the counterpart of the CMM Color Management Module for ColorSync services. Text management in the operating system allowed QuickDraw GX to accept character strings with any mix of writing systems and scripts, and compose the strings automatically, whether the encoding was Unicode 1.0 or 8 bit and 8/16 bit encodings.
Another interesting feature was font "variations," which were the GX equivalent of Adobe's "multiple master" fonts. Whereas Adobe's fonts required the user explicitly create an "instance" of the font by specifying values for the variation axes before they could use it, GX allowed the user to specify the font directly for a layout style, and then dynamically vary the axis values and immediately observe the effect on the layout of the text.
This technology became the core of what Microsoft and Adobe would adopt in 2016, with its development of OpenType Variable Fonts.