Rock shed

Summary

A rock shed is a civil engineering structure used in mountainous areas where rock slides and land slides create highway closure problems. A rock shed is built over a roadway that is in the path of the slide. They are equally used to protect railroads.[1] They are usually designed as a heavy reinforced concrete covering over the road, protecting the surface and vehicles from damage due to the falling rocks with a sloping surface to deflect slip material beyond the road,[2] however an alternative is to include an impact-absorbing layer above the ceiling.[3] A further use of this type of structure may be seen protecting the A4 road; although constructed primarily to alleviate risk from falling rocks from a limestone seam[4] it also serves to protect against objects or persons falling from the Clifton Suspension Bridge[5] where the height differential of approximately 70 metres from the bridge to the bottom of the Avon Gorge would give sufficient kinetic energy to even a relatively small item to cause injury on impact.

Rock shed on Nagano Prefectural Road, Japan
Rock shed on Niigata Prefectural Road, Japan

Examples of rock sheds edit

See also edit

References edit

  1. ^ "The Landslide Handbook" (PDF). USGS. pp. 102–103. Retrieved 31 December 2017.
  2. ^ "SEISMIC RETROFITTING MANUAL FOR HIGHWAY STRUCTURES: PART 2" (PDF). US Dept of Transportation Federal Highway Administration. August 2004. pp. 127–129. Retrieved 31 December 2017.
  3. ^ Chen, Jian-An; Lin, Ming-Lang; Lo, Chia-Ming; Wang, Ching-Ping (12 April 2013). "DEM Simulation of Rock Shed Failure due to Rockfall Impact". EGU General Assembly Conference Abstracts. EGU General Assembly 2013: EGU2013-3780. Bibcode:2013EGUGA..15.3780C.
  4. ^ "The cliff face under the Clifton suspension bridge, Avon Gorge, Bristol". Quarterly Journal of Engineering Geology and Hydrogeology. The Geological Society. Retrieved 14 June 2016.
  5. ^ Thomas, Ray (18 March 2000). "Bristol Avon Gorge". Retrieved 31 December 2017.