Sodium percarbonate, or sodium carbonate peroxide is a chemical substance with formula Na
2H
3CO
6. It is an adduct of sodium carbonate ("soda ash" or "washing soda") and hydrogen peroxide (that is, a perhydrate) whose formula is more properly written as 2 Na
2CO
3 · 3 H
2O
2. It is a colorless, crystalline, hygroscopic and water-soluble solid.[3] It is sometimes abbreviated as SPC. It contains 32.5% by weight of hydrogen peroxide.
Crystal structure at 100 K [1]
| |
Names | |
---|---|
IUPAC name
sodium carbonate—hydrogen peroxide (2/3)
| |
Other names
Sodium carbonate peroxide,[2] sodium carbonate sesquiperhydrate, PCS, SPC, solid hydrogen peroxide, Sodium carbonate hydrogen peroxide, sodium carbonate peroxyhydrate
| |
Identifiers | |
| |
3D model (JSmol)
|
|
ChemSpider |
|
ECHA InfoCard | 100.036.082 |
EC Number |
|
PubChem CID
|
|
RTECS number |
|
UNII |
|
UN number | 3378 |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
Na2CO3·1.5 H2O2 | |
Molar mass | 156.982 g/mol |
Appearance | White solid |
150 g/l | |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards
|
Irritant, oxidizer |
Flash point | Non-flammable |
Related compounds | |
Other anions
|
Sodium carbonate Sodium bicarbonate |
Other cations
|
Calcium percarbonate Magnesium percarbonate |
Related compounds
|
Sodium perborate Sodium persulfate Sodium perphosphate |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references
|
The product is used in some eco-friendly bleaches and other cleaning products.[3]
Sodium percarbonate was first prepared in 1899 by Ukrainian chemist Sebastian Moiseevich Tanatar (7 October 1849 – 30 November 1917).[4]
At room temperature, solid sodium percarbonate has the orthorhombic crystal structure, with the Cmca crystallographic space group. The structure changes to Pbca as the crystals are cooled below about −30 °C.[1]
Dissolved in water, sodium percarbonate yields a mixture of hydrogen peroxide (which eventually decomposes to water and oxygen), sodium cations Na+
, and carbonate CO2−
3.[3][5]
Sodium percarbonate is produced industrially by crystallization of a solution of sodium carbonate and hydrogen peroxide, with proper control of the pH and concentrations.[6][1][7] This is also a convenient laboratory method.
Alternatively, dry sodium carbonate may be treated directly with concentrated hydrogen peroxide solution.[8]
It may also be formed from a process starting from sodium peroxide; when absolute ethyl alcohol reacts with sodium peroxide at 0 °C, a perhydroxide is produced.[citation needed]
Carbon dioxide converts it into sodium hydrogen percarbonate.
World production capacity of this compound was estimated at several hundred thousand tons for 2004.[9]
As an oxidizing agent, sodium percarbonate is an ingredient in a number of home and laundry cleaning products, including non-chlorine bleach products such as Oxyper, OxiClean, Tide laundry detergent,[3] and Vanish.[5]
Many commercial products mix a percentage of sodium percarbonate with sodium carbonate. The average "Oxy" product in the supermarket contains 35–40% sodium percarbonate with about 5% active oxygen when titrated.
Sodium percarbonate is also used as a cleaning agent in homebrewing.[10]
Sodium percarbonate can be used in organic synthesis as a convenient source of anhydrous H2O2, in particular in solvents that cannot dissolve the carbonate but can leach the H2O2 out of it.[11] A method for generating trifluoroperacetic acid in situ for use in Baeyer–Villiger oxidations from sodium percarbonate and trifluoroacetic anhydride has been reported; it provides a convenient and cheap approach to this reagent without the need to obtain highly concentrated hydrogen peroxide.[12][13]
{{cite encyclopedia}}
: CS1 maint: multiple names: authors list (link)