Solid mechanics is a vast subject because of the wide range of solid materials available, such as steel, wood, concrete, biological materials, textiles, geological materials, and plastics.
A solid is a material that can support a substantial amount of shearing force over a given time scale during a natural or industrial process or action. This is what distinguishes solids from fluids, because fluids also support normal forces which are those forces that are directed perpendicular to the material plane across from which they act and normal stress is the normal force per unit area of that material plane. Shearing forces in contrast with normal forces, act parallel rather than perpendicular to the material plane and the shearing force per unit area is called shear stress.
Therefore, solid mechanics examines the shear stress, deformation and the failure of solid materials and structures.
The most common topics covered in solid mechanics include:
stability of structures - examining whether structures can return to a given equilibrium after disturbance or partial/complete failure
dynamical systems and chaos - dealing with mechanical systems highly sensitive to their given initial position
thermomechanics - analyzing materials with models derived from principles of thermodynamics
biomechanics - solid mechanics applied to biological materials e.g. bones, heart tissue
geomechanics - solid mechanics applied to geological materials e.g. ice, soil, rock
vibrations of solids and structures - examining vibration and wave propagation from vibrating particles and structures i.e. vital in mechanical, civil, mining, aeronautical, maritime/marine, aerospace engineering
fracture and damage mechanics - dealing with crack-growth mechanics in solid materials
A material has a rest shape and its shape departs away from the rest shape due to stress. The amount of departure from rest shape is called deformation, the proportion of deformation to original size is called strain. If the applied stress is sufficiently low (or the imposed strain is small enough), almost all solid materials behave in such a way that the strain is directly proportional to the stress; the coefficient of the proportion is called the modulus of elasticity. This region of deformation is known as the linearly elastic region.
It is most common for analysts in solid mechanics to use linear material models, due to ease of computation. However, real materials often exhibit non-linear behavior. As new materials are used and old ones are pushed to their limits, non-linear material models are becoming more common.
These are basic models that describe how a solid responds to an applied stress:
Elasticity – When an applied stress is removed, the material returns to its undeformed state. Linearly elastic materials, those that deform proportionally to the applied load, can be described by the linear elasticity equations such as Hooke's law.
Viscoelasticity – These are materials that behave elastically, but also have damping: when the stress is applied and removed, work has to be done against the damping effects and is converted in heat within the material resulting in a hysteresis loop in the stress–strain curve. This implies that the material response has time-dependence.
Plasticity – Materials that behave elastically generally do so when the applied stress is less than a yield value. When the stress is greater than the yield stress, the material behaves plastically and does not return to its previous state. That is, deformation that occurs after yield is permanent.
Viscoplasticity - Combines theories of viscoelasticity and plasticity and applies to materials like gels and mud.
Thermoelasticity - There is coupling of mechanical with thermal responses. In general, thermoelasticity is concerned with elastic solids under conditions that are neither isothermal nor adiabatic. The simplest theory involves the Fourier's law of heat conduction, as opposed to advanced theories with physically more realistic models.
1873: Carlo Alberto Castigliano presented his dissertation "Intorno ai sistemi elastici", which contains his theorem for computing displacement as partial derivative of the strain energy. This theorem includes the method of least work as a special case
1874: Otto Mohr formalized the idea of a statically indeterminate structure.
1936: Hardy Cross' publication of the moment distribution method, an important innovation in the design of continuous frames.
1941: Alexander Hrennikoff solved the discretization of plane elasticity problems using a lattice framework
1942: R. Courant divided a domain into finite subregions
1956: J. Turner, R. W. Clough, H. C. Martin, and L. J. Topp's paper on the "Stiffness and Deflection of Complex Structures" introduces the name "finite-element method" and is widely recognized as the first comprehensive treatment of the method as it is known today
Wikiversity has learning resources about Solid mechanics
Wikibooks has a book on the topic of: Solid mechanics