Spaceborne Imaging Radar

Summary

The Spaceborne Imaging Radar (SIR) – full name 'Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SIR-C/X-SAR)',[1] is a synthetic aperture radar which flew on two separate shuttle missions. Once from the Space Shuttle Endeavour in April 1994 on (STS-59) and again in October 1994 on (STS-68). The radar was run by NASA's Space Radar Laboratory. SIR utilizes 3 radar frequencies: L band (24 cm wavelength), C band (6 cm) and X band (3 cm),[1] allowing for study of geology, hydrology, ecology and oceanography. Comparing radar images to data collected by teams of people on the ground as well as aircraft and ships using simultaneous measurements of vegetation, soil moisture, sea state, snow and weather conditions during each flight. The imaging radar was able to take images anytime regardless of clouds cover. The Radar-C system was built and operated by NASA's Jet Propulsion Laboratory (JPL). The mission was a joint work of NASA with the German and Italian space agencies.[2][3] Each of the week long mission scanned about 50 million square kilometers of the Earth's surface, (19.3 million square miles).[4]

Spaceborne Imaging Radar (SIR)
SIR-C/X-SAR in the payload bay of space shuttle Endeavour on STS-59, 9 April 1994
Mission typeEarth science
OperatorNASA · JPL
Websitejpl.nasa.gov/missions/spaceborne-imaging-radar-c-x-band-synthetic-aperture-radar-sir-c-x-sar/
Mission durationTwo trips, 11 days each
Spacecraft properties
ManufacturerJPL
Start of mission
Launch date9 April 1994 and 30 September 1994
RocketSTS-59 and STS-68
Launch siteCape Canaveral
 
Spaceborne radar image of Unzen
Taken from Space Shuttle, 15 April 1994

The SIR mission revealed hidden river channels in the Sahara Desert indicating significant climate change in the past.[5] SIR was also used for volcano research by keeping researchers a safe distance from hazardous and often inaccessible areas. The radar was also used to generate detailed three dimensional mappings of the Earth's surface.[2]

Radar also found temples in Angkor,[6][7] and ancient segments of China's Great Wall.[8]

Specification edit

  • Orbital altitude above earth = 225 km (140 mi)
  • The width of the imaged swath on the ground = 15–90 kilometers (9.3–55.9 miles)
  • C-band beamwidth = 0.25 deg. × 5 deg.
  • L-band beamwidth = 1.1 deg. × 6 deg.
  • Scan angle range = ±23 deg. from boresight across narrow antenna direction only
  • Bandwidth = 10, 20 and 40 GHz
  • Pulse repetition rate = 1395–1736 pulses per second
  • Total science data = 50 hours per channel, per mission (two missions, total 100 hours)
  • Total instrument mass = 11,000 kg (24,000 lb)
  • DC power consumption = 3000–9000 Watts
  • L-band data rate = 90 Mbit/s
  • C-band data rate = 90 Mbit/s
  • X-band data rate = 45 Mbit/s
  • L-band wavelength = 0.235 m
  • C-band Wavelength = 0.058 m
  • X-band wavelength = 0.031 m

See also edit

References edit

  1. ^ a b "Catalog Page for PIA00504". Photojournal.jpl.nasa.gov. Retrieved 5 May 2014.
  2. ^ a b "Spaceborne Imaging Radar" (PDF). NASA/JPL. Archived from the original (PDF) on 6 April 2013. Retrieved 5 May 2014.
  3. ^ NASA JPL, Photo, SIR-C/X-SAR
  4. ^ NASA JPL, What is SIR-C/X-SAR?
  5. ^ "Space radar unearths secrets of the Nile" (Press release). Jpl.nasa.gov. 6 December 1996. Retrieved 5 May 2014.
  6. ^ "NASA JPL Press Release, February 12, 1998". Jet Propulsion Laboratory. Archived from the original on 24 December 2014. Retrieved 12 July 2016.
  7. ^ JPL, February 7, 1995, Space Radar Laboratory Images May Help Find Unknown Settlements
  8. ^ JPL, April 18, 1996, Space Radar Reveals Ancient Segments of China's Great Wall