Tatara (furnace)


Charcoal is added to a clay Tatara furnace in Niimi, Okayama until a temperature of over 800 °C is achieved.

The tatara () is the traditional Japanese furnace used for smelting iron and steel. The word later also came to mean the entire building housing the furnace. The traditional steel in Japan comes from ironsand processed in a special way, called tatara system.[1]

Engineering drawing of a japanese Tatara-furnace

The steel, or tamahagane (玉鋼), used to forge Japanese swords (nihontō (日本刀), commonly known as katana ()) by contemporary Japanese forge masters like Kihara Akira and Gassan Sadatoshi is still smelted in a tatara. One of the few remaining tatara is the Nittoho tatara in Shimane Prefecture, Japan.


Working the bellows of a Tatara.

It is generally agreed that the word tatara is foreign to Japan, originating in India or Central Asia. There is a possibility that the word came from a place in ancient Korea where the two dynasties would often meet. According to the Kojiki (one of the oldest Japanese historical texts), this meeting place was called Tatara-ba (たたら場) or Tatara-tsu (たたら津), and the word was possibly imported with iron-working technology. Japanese scholar Tokutaro Yasuda suggests that the word may be from the Sanskrit word tātala, meaning "heat," noting that the Hindi word for steel is sakeraa, which is very similar to the word kera (鉧) used in Japan for the steel bloom, which the tatara produces.[2][3] The two Chinese characters used when the word has the original meaning are 踏鞴 and, besides as tatara, they can be also read as fumifuigo, or foot bellows.


The structure of a tatara. On the two sides of the furnace are visible two bellows

The smelting process used differs from that of the modern mass production of steel. A clay vessel about 1.1 meters (4 feet) tall, 3 meters (12 feet) long, and 1.1 meters (4 feet) wide is constructed. This is the tatara. After the clay tub has dried, it is fired until dry. A charcoal fire is started from soft pine charcoal, then the smelter will wait for the fire to reach the correct temperature. At that point, he will direct the addition of ironsand, known as satetsu. This will be layered in with more charcoal and more ironsand over the next 72 hours. Four or five people need to constantly work on this process.

Tamahagane, which is used to forge the blade of traditionally made Japanese blade nihonto.

It takes about a week to build the tatara and complete the iron conversion to steel. When the process is done, the clay tub is broken and the steel bloom, known as a kera, is removed. At the end of the process, the tatara will have consumed about 10 tons of satetsu and 12 tons of charcoal, leaving about 2.5 tons of tamahagane.

The Nittoho Tatara

In 1977, the Japanese Society for Preservation of Japanese Art Swords (Nittoho), together with the Japanese government's Agency for Cultural Affairs and Hitachi Works, built in Shimane Prefecture the so-called Nittoho Tatara to provide the steel necessary for the production of Japanese swords. The Nittoho Tatara is managed jointly with Yasugi Works, a subsidiary company of Hitachi Metals, and is operational only during the winter.

See also


  1. ^ "Science of Tatara and Japanese Sword - Traditional Technology viewed from Modern Science" by Tatsuo INOUE
  2. ^ "日立金属>たたらの話>たたらの由来".
  3. ^ "Hitachi Metals>Tale of tatara>The Origins of Tatara".


  • Iwanami Kōjien (広辞苑) Japanese dictionary, 5th Edition (2000), CD version
  • The Tale of the Tatara, Hitachi Metals, Ltd.
  • The Nittoho Tatara in Shimane Prefecture, YouTube.
  • Tatara
  • Masaru Fujimoto Weapons of Wonder, The Japan Times, March 16, 2003.