In computing and telecommunications, a unit of information is the capacity of some standard data storage system or communication channel, used to measure the capacities of other systems and channels. In information theory, units of information are also used to measure information contained in messages and the entropy of random variables.
The most commonly used units of data storage capacity are the bit, the capacity of a system that has only two states, and the byte (or octet), which is equivalent to eight bits. Multiples of these units can be formed from these with the SI prefixes (power-of-ten prefixes) or the newer IEC binary prefixes (power-of-two prefixes).
In 1928, Ralph Hartley observed a fundamental storage principle, which was further formalized by Claude Shannon in 1945: the information that can be stored in a system is proportional to the logarithm of N possible states of that system, denoted logb N. Changing the base of the logarithm from b to a different number c has the effect of multiplying the value of the logarithm by a fixed constant, namely logc N = (logc b) logb N. Therefore, the choice of the base b determines the unit used to measure information. In particular, if b is a positive integer, then the unit is the amount of information that can be stored in a system with N possible states.
When b is 2, the unit is the shannon, equal to the information content of one "bit" (a portmanteau of binary digit). A system with 8 possible states, for example, can store up to log28 = 3 bits of information. Other units that have been named include:
The trit, ban, and nat are rarely used to measure storage capacity; but the nat, in particular, is often used in information theory, because natural logarithms are mathematically more convenient than logarithms in other bases.
Several conventional names are used for collections or groups of bits.
Historically, a byte was the number of bits used to encode a character of text in the computer, which depended on computer hardware architecture; but today it almost always means eight bits – that is, an octet. A byte can represent 256 (28) distinct values, such as non-negative integers from 0 to 255, or signed integers from −128 to 127. The IEEE 1541-2002 standard specifies "B" (upper case) as the symbol for byte (IEC 80000-13 uses "o" for octet in French,[nb 1] but also allows "B" in English, which is what is actually being used). Bytes, or multiples thereof, are almost always used to specify the sizes of computer files and the capacity of storage units. Most modern computers and peripheral devices are designed to manipulate data in whole bytes or groups of bytes, rather than individual bits.
A group of four bits, or half a byte, is sometimes called a nibble, nybble or nyble. This unit is most often used in the context of hexadecimal number representations, since a nibble has the same amount of information as one hexadecimal digit.
Computers usually manipulate bits in groups of a fixed size, conventionally called words. The number of bits in a word is usually defined by the size of the registers in the computer's CPU, or by the number of data bits that are fetched from its main memory in a single operation. In the IA-32 architecture more commonly known as x86-32, a word is 16 bits, but other past and current architectures use words with 4, 8, 9, 12, 13, 16, 18, 20, 21, 22, 24, 25, 26, 29, 30, 31, 32, 33, 35, 36, 38, 39, 40, 42, 44, 48, 50, 52, 54, 56, 60, 64, 72, 80 bits or others.
Terms for large quantities of bits can be formed using the standard range of SI prefixes for powers of 10, e.g., kilo = 103 = 1000 (as in kilobit or kbit), mega = 106 = 1000000 (as in megabit or Mbit) and giga = 109 = 1000000000 (as in gigabit or Gbit). These prefixes are more often used for multiples of bytes, as in kilobyte (1 kB = 8000 bit), megabyte (1 MB = 8000000bit), and gigabyte (1 GB = 8000000000bit).
However, for technical reasons, the capacities of computer memories and some storage units are often multiples of some large power of two, such as 228 = 268435456 bytes. To avoid such unwieldy numbers, people have often repurposed the SI prefixes to mean the nearest power of two, e.g., using the prefix kilo for 210 = 1024, mega for 220 = 1048576, and giga for 230 = 1073741824, and so on. For example, a random access memory chip with a capacity of 228 bytes would be referred to as a 256-megabyte chip. The table below illustrates these differences.
|Symbol||Prefix||SI Meaning||Binary meaning||Size difference|
|k||kilo||103 = 10001||210 = 10241||2.40%|
|M||mega||106 = 10002||220 = 10242||4.86%|
|G||giga||109 = 10003||230 = 10243||7.37%|
|T||tera||1012 = 10004||240 = 10244||9.95%|
|P||peta||1015 = 10005||250 = 10245||12.59%|
|E||exa||1018 = 10006||260 = 10246||15.29%|
|Z||zetta||1021 = 10007||270 = 10247||18.06%|
|Y||yotta||1024 = 10008||280 = 10248||20.89%|
In the past, uppercase K has been used instead of lowercase k to indicate 1024 instead of 1000. However, this usage was never consistently applied.
On the other hand, for external storage systems (such as optical discs), the SI prefixes are commonly used with their decimal values (powers of 10). There have been many attempts to resolve the confusion by providing alternative notations for power-of-two multiples. In 1998 the International Electrotechnical Commission (IEC) issued a standard for this purpose, namely a series of binary prefixes that use 1024 instead of 1000 as the main radix:
|Ki||kibi, binary kilo||1 kibibyte (KiB)||210 bytes||1024 B|
|Mi||mebi, binary mega||1 mebibyte (MiB)||220 bytes||1024 KiB|
|Gi||gibi, binary giga||1 gibibyte (GiB)||230 bytes||1024 MiB|
|Ti||tebi, binary tera||1 tebibyte (TiB)||240 bytes||1024 GiB|
|Pi||pebi, binary peta||1 pebibyte (PiB)||250 bytes||1024 TiB|
|Ei||exbi, binary exa||1 exbibyte (EiB)||260 bytes||1024 PiB|
Several other units of information storage have been named:
Some of these names are jargon, obsolete, or used only in very restricted contexts.
[…] The writing of an impulse would involve writing a dibit or two transitions arbitrarily closely together. […]
[…] Bit - The smallest unit of information which can be represented. (A bit may be in one of two states I 0 or 1). […] Byte - A group of 8 contiguous bits occupying a single memory location. […] Character - A group of 4 contiguous bits of data. […] programs are held in either ROM or program RAM, both of which are divided into pages. Each page consists of 256 8-bit locations. Addresses 0 through 255 comprise the first page, 256-511 comprise the second page, and so on. […](NB. This Intel 4004 manual uses the term character referring to 4-bit rather than 8-bit data entities. Intel switched to use the more common term nibble for 4-bit entities in their documentation for the succeeding processor 4040 in 1974 already.)
[…] slab, Abk. aus syllable = Silbe, die kleinste adressierbare Informationseinheit für 12 bit zur Übertragung von zwei Alphazeichen oder drei numerischen Zeichen. (NCR) […] Hardware: Datenstruktur: NCR 315-100 / NCR 315-RMC; Wortlänge: Silbe; Bits: 12; Bytes: –; Dezimalziffern: 3; Zeichen: 2; Gleitkommadarstellung: fest verdrahtet; Mantisse: 4 Silben; Exponent: 1 Silbe (11 Stellen + 1 Vorzeichen) […] [slab, abbr. for syllable = syllable, smallest addressable information unit for 12 bits for the transfer of two alphabetical characters or three numerical characters. (NCR) […] Hardware: Data structure: NCR 315-100 / NCR 315-RMC; Word length: Syllable; Bits: 12; Bytes: –; Decimal digits: 3; Characters: 2; Floating point format: hard-wired; Significand: 4 syllables; Exponent: 1 syllable (11 digits + 1 prefix)]