Wills Creek Formation is a mapped Silurian bedrock unit in Pennsylvania, Maryland, Virginia, and West Virginia.
Wills Creek Formation | |
---|---|
Stratigraphic range: Silurian | |
Type | sedimentary |
Underlies | Tonoloway Formation |
Overlies | Bloomsburg Formation and Williamsport Formation |
Lithology | |
Primary | Sandstone, shale |
Other | Siltstone, limestone, dolomite |
Location | |
Region | Appalachian Mountains |
Extent | Pennsylvania, Maryland, Virginia, West Virginia |
Type section | |
Named for | Wills Creek at Cumberland, Allegany County, Maryland |
Named by | P. R. Uhler, 1905[1] |
The Wills Creek is defined as a moderately well bedded greenish-gray shale containing local limestone and sandstone zones, or more specifically as an olive to yellowish-gray, thin-bedded sandstone, calcareous shale, dolomite, argillaceous limestone, and sandstone. Red shale and siltstone occur in the lower part of the formation. The formation has a thickness between 450 feet and 600 feet in Maryland and 445 to 620 feet in Pennsylvania.[2]
The Wills Creek forms the bedrock of the valley around and to the east of Lewistown, Pennsylvania.[3]
The Wills Creek Limestone contain fossils from the Pridoli to the Ludlow epoch, or 422.9 to 418.1 Ma.[4]
Dean et al. (1985) describe the Wills Creek as sparsely fossiliferous.[5]
Conodonts have been identified in the Wills Creek in Virginia (Ozarkodina snajdri crispa Zone).[6]
Relative age dating of the Wills Creek places it in the Silurian period. It rests conformably a top the Bloomsburg Formation and below the Tonoloway Formation.[7]
The Wills Creek is a poor source of construction material and is only suitable as common fill.[8]
{{cite journal}}
: Cite journal requires |journal=
(help)