The M106 mortar carrier (full designation: Carrier, Mortar, 107 mm, Self-propelled) was a tracked, self-propelled mortar carrier in service with the United States Army. It was designed to provide indirect fire support to primarily infantry, units, but could also provide support to any unit under attack within range. It was replaced with the M1064 mortar carrier.[4]
M106 mortar carrier | |
---|---|
Type | Mortar carrier |
Place of origin | United States |
Service history | |
Used by | see operators |
Wars | Cambodian Civil War[1][2] Vietnam War Lebanese Civil War[citation needed] |
Production history | |
Manufacturer | FMC Corp.[3] |
Variants | XM106, M106, M106A1, M106A2 |
Specifications | |
Mass | 12.9 short tons (11.7 t) |
Length | 16.2 feet (4.9 m) |
Width | 9 feet (2.7 m) |
Height | 7.3 feet (2.2 m) |
Crew | 6[4] |
Armor | 5083 Aluminum |
Main armament | M30 4.2in (106.7mm) mortar |
Secondary armament | M2 Browning |
Engine | Detroit Diesel 6V53T 210 horsepower (160 kW) |
Payload capacity | 88 rounds (HE, Illumination, White Phosphorus) |
Transmission | Allison X200-4 series |
Ground clearance | 16.5 inches (42 cm) |
Fuel capacity | 90 US gallons (340 L) |
Operational range | 250 nautical miles (460 km) |
The M106 is a variation of the M113 armored personnel carrier that carried a 107mm M30 mortar. It was introduced in 1964, alongside the similar M125 81mm mortar carrier, and deployed in Vietnam.[5] Three variants existed: the M106, the M106A1 and the M106A2. 862 M106 (including 841 for US forces), 1,409 M106A1 (including 990 for US forces) and 350 M106A2 (including 53 for the US forces) were produced.[4]
After intensive trials in 1988, the US Army chose to replace it with the 120mm Soltam K6. Some of the M106 carriers were upgraded to the M1064A3 configuration by replacing the 107mm mortar by a 120mm mortar.[4]
Media related to M106 mortar carriers at Wikimedia Commons