Venom is made up of multiple proteinous components, with each component differing in its structural complexity. Venom can be a mixture of simplistic peptides, secondary (α-helices and β-sheets) structured proteins and tertiary structured proteins (crystalline structures).^[6] Furthermore, depending on the organism, there can be fundamental differences in the strategies they incorporate in their venom contents, the biggest difference being between invertebrates and vertebrates. For example, the majority of funnel-web spider’s venom was made up of peptides between 3-5 KDa (75%), with the remaining peptides being between 6.5-8.5 KDa in mass.^[7] Conversely, snake venom is made up of more complex protein such as modified saliva proteins (CRISPs & kallikrein) and protein families that have had their genes recruited from other tissue groups (Acetylcholinesterase, crotasin, defensin & cystatin).^[8] Due to this extraordinary amount of variation in the components that make up venom, a new field was needed to identify and categorise the millions of bioactive molecules that are found within the venom.^[1] Therefore, by combining the methods of multiple fields such as genomics, transcriptomics, proteomics and bioinformatics, an aptly named new field emerged named venomics.

Venomics was first established in the latter half of the 20th century as different ‘-omic’ technologies began to rise in popularity. However, the progression of venomics since its inception has always been reliant on and limited by the advancement of technology. Juan Calvete draws attention to this with explicitly when detailing the history of venomics.^[9] He declares that ''the last revolutions made in venomics research in the last decade (1989-1999) are the direct result of advancements made in proteomic-centered methods and the indirect result of more widely available and cost-effective forms of transcriptomics and bio-informatics analysis''. One of the first popular research topics of venomics was the pharmacological properties of the polypeptide toxins found in snake venom (Specifically, Elapidae and Hydrophidae) due to the neurotoxic properties and their ability to cause respiratory failure in animals.^[10] However, due to the lack of competent technology, less complex techniques (such dialysis to separate the venom), followed by simplistic chromatography and electrophoresis analysis, research was limited.

Evidence of early interest in snake venom was prevalent throughout the early 20th century with one of the first big breakthroughs being in the mid-1960s. For example, Halbert Raudonat was one of the first researchers to fractionate Cobra (Naja nivea) venom using a sophisticated dialysis and paper chromatography techniques.^[12] Furthermore, Evert Karlsson and David Eaker were able to successfully purify the specific neurotoxins found in Cobra (Naja nigricollis) venom and found that those isolated polypeptides had a consistent molecular weight of around 7000.^[13]

Future research in this field would eventually lead to indirect predictive models and then direct crystal structures of important many protein superfamilies.^[14][11] For example, Barbara Low was one of the first to release a 3D structure of the three-finger protein (TFP), Erabutoxin-b.^[15] TFPs are an example of α-Neurotoxins, they are small in structure (~60-80 amino acid length) and are a predominant component found in many snake venoms (representing up to 70%-95% of all toxins).^[16][17]

Retrospectively, venomics has made a lot of progress in sequencing and creating accurate models of toxic molecules through current advanced methods. Through these methods, global categorisation of venoms has also taken place, with previously studied venoms being documented and widely available. An example of this would be the ‘Animal toxin annotation project’ (Provided by the UniProtKB/Swiss-Prot), which is a database that aims to provide a high quality and freely available source of protein sequences, 3D structures and functional information on thousands of animal venom/poisons. So far, they have categorised over 6,500 toxins (Both venoms & poisons) at the protein-level, with the overall UniProt organisation having reviewed over 500,000 proteins and provided the proteomes of 100,000 organisms. However, even with today’s technology the deconstruction and cataloguing of the individual components of what makes up an animal’s venom takes a large amount of time and resources due to the overwhelming amount of molecules that are found in a single venom sample. This is complicated further when there are some animals (I.e. Cone snails) that can change the complexity and make-up of their venom depending on the circumstances (Offensive related or defensive related matters) of the envenoming.^[18] Furthermore, inter-specific differences exist between male and female of a species with their venoms varying in quantities and toxicity.^[19]

Professor Juan J. Calvete is a prolific researcher in venomics at the biomedical institute in Valencia and has extensively explained the process involved in untangling and analysing venom (Once in 2007 and recently in 2017.^[21][20]

These involve the following steps:

(1) Venom collection, (2) Separation and quantification, (3) Identification and (4) Representation of components found.

(1) Venom collection methods edit

Venom milking is the most simplistic way of collecting a venom sample. It usually involves a vertebrate animal (Typically a snake) to deliver a venomous bite into a container. Similarly, electrical stimulation can be used for invertebrate animal (Insects and arachnids) subjects.^[22] This practice has allowed for the discovery of the basic properties of venom and to understand the biological factors involved in venom production such as venom regeneration periods. Other methods involve post-mortem dissection of the venom glands to collect the required materials (Venom or tissue).

(2) Separation and quantification methods edit

Separation methods are the first step to decomplexify the venom sample, with a common method being reverse‐phase high performance liquid chromatography (RP-HPLC). This method can be applied broadly to nearly all venoms as a crude fractionation method and to detect the peptide bonds found. A less common techniques like 1D/2D gel electrophoresis can also be used in cases of venoms containing heavy, complex peptides (Preferable >10KDa). This means in additions to RP-HPLC, Gel electrophoresis can help identify large molecules (such as enzymes) and to help refine venom prior to further analytical methods.^[1] Next, N-terminal sequencing is used to find the amino acid order of the fractionated proteins/peptides starting with the N-terminal end.^[23] Furthermore, SDS‐PAGE (Sodium dodecyl sulfate-polyacrylamide gel electrophoresis) can be performed on the isolated proteins from the RP-HPLC to identify proteins of interest before moving on to the identification stage.^[21]

(3) Identification methods edit

There are two predominantly used proteomic methods when identifying the structure of a peptide/protein, Top-down proteomics (TDP) and Bottom-up proteomics (BUP). TDP involves taking fractionated venom samples and analysing those peptides/proteins with Liquid chromatography tandem-mass spectrometry (LC-MS/MS). This results in the identification and characterisation of all peptides/proteins present in the initial sample. While, BUP consists of fractionating and breaking down the peptides/proteins before analysis (LC-MS/MS) using chemical reduction, alkylating and enzymatic digestion (Typically with trypsin). BUP is more commonly used than TDP as breaking down the samples allows the components to meet the ideal mass range for LC-MS/MS analysis.^[24][1] However, there are disadvantages and limitations with both identification methods. BUP results are prone to protein inference problems as large toxins can be broken down into smaller toxins which are shown in the output, but do not exist naturally within the venom sample. While, TDP is the newer method and is able to fill-in the gaps BUP leaves, TDP needs instruments with high amounts of resolving power (Typically 50,000 or above). Most studies will actually use both methods in parallel to obtain the most accurate results. Furthermore, transcriptomic/genomic methods can be used to create cDNA libraries from the extracted mRNA molecules expressed in the venom glands of a venomous animal. These methods optimise the protein identification process by producing the DNA sequences of all proteins expressed in the venom glands. A large problem in using transcriptomic/genomic analysis in venomic studies is the lack of full genome sequences of many venomous animals. However, this is a fleeting problem due to the amount of full genome projects involved in sequencing venomous animals such as the ‘venomous system genome project’ (Launched in 2003).^[25] Through these projects, various fields of study such as ecological/evolutionary studies and venomic studies can provide supporting information and systematic analysis of toxins.

(4) Accurate representation of components edit

Renata Rodrigues produced an informative study detailing both the proteome and the transcriptome of the Neuwied’s Lancehead (Bothropoides pauloensis), with all the methods described above.^[26] The proteome showed the presence of nine protein families with the majority of components belonging to snake venom metalloproteinases (38%), phospholipase A2 (31%) and Bradykinin-potentiating peptides/C-type natriuretic peptides (12%). The transcriptome gave a cDNA of over 1100 expressed sequence tags (ESTs), with only 688 sequences being related to the venom gland. Similarly, the transcriptome showed matching results with 36% of SVMP’s being the majority of the ESTs followed by PLA2 (26%) and BPP/C-NP (17%) sequences. Furthermore, this study shows that through both the use of proteomic and transcriptomics, we can fully comprehend the components within venom. This can then lead to both the molecular structure and functions of many bioactive components, which can intern lead to bioprospecting venom components into new medicines and can help to develop better methods of creating anti-venoms.

The field of venomics has been vastly revamped since its origin in the 20th century and continues to be improved with contemporary methods such as next generation sequencing and nuclear magnetic resonance spectroscopy. From this trend, it would seem that venomics will be progressively enhanced in its capabilities through the persistent technological advancements of the 21st century. As previously mentioned, a potential route that can be expanded upon further by venomics could be venom-specific molecules being co-opted into specialised medicines. The first example of this was in the early 1970s, when Captopril was found to be an inhibitor of angiotensin converting enzymes (ACE) and had the means of treating hypertension in people.^[27] Glenn King discusses the current state of venom-derived drugs, with six drugs derived from venom being FDA-approved and ten more currently being under clinical trials.^[28] Michael Pennington gives a detailed update on the current landscape of venom-derived drugs and the potential future of the field (Table 1).^[4]

Anti-venoms is another branch of medicine, which needs to be improved due to the problems many developing countries face with venomous animals. Places like south/southeast Asia and sub-Saharan Africa are where many cases of both morbidity (limb amputation) and mortality take place.^[29] Snakes (especially Elapidae and Viperidae) are the leading cause of envenomings and antivenoms are in constant short supply in high risk areas due to the strenuous productive methods (Immunised animals) and the strict storage preferences (Constant below 0^OC storage). This problem continues, when the medicine itself has limited effects on localised tissue and inevitably causes either acute (anaphylactic or pyrogenic) and delayed (serum sickness type) reactions in most patients.^[30] However, by using different ‘omic’ technologies, the use of ‘Antivenomics’ can potentially make safer, more cost effective and less time-consuming ways of producing antivenoms for a range of toxic organisms. New antivenom methods are even being investigated today with the use of monoclonal antibodies (mAbs) and the expansion of venomous databases, allowing for more effective approaches when screening of cross-reactivity of antivenoms.^[31][32] Lastly, agriculture can be improved upon by enhanced-venomic techniques through the invention of insect-specific biopesticides created from venom. Insects are both an agricultural/horticultural pest and act as vector/carriers of many parasites and disease.^[33] Ergo, effective insecticides are always needed to control the destructive effects of many insect species. However, many insecticides used in the past, do not meet current regulations and have been banned due to harmful effects such as affecting non-target species (DDT) and having a high toxicity level towards mammals (Neonicotinoids).^[34] Monique Windley propose arachnid venom is a potential solution to this problem due to the abundance of neurotoxic compounds present in their venom (Predicted 10million bioactive peptides) and due to their venom being specific towards insect.^[5]

Table 1. Venom-derived medicines discussed by Pennington, Czerwinski et al., (2017).^[4]