Copper(II) oxide

Summary

Copper(II) oxide or cupric oxide is an inorganic compound with the formula CuO. A black solid, it is one of the two stable oxides of copper, the other being Cu2O or copper(I) oxide (cuprous oxide). As a mineral, it is known as tenorite. It is a product of copper mining and the precursor to many other copper-containing products and chemical compounds.[3]

Copper(II) oxide
Names
IUPAC name
Copper(II) oxide
Other names
Cupric oxide
Identifiers
  • 1317-38-0 checkY
3D model (JSmol)
  • Interactive image
  • Interactive image
ChEBI
  • CHEBI:75955 ☒N
ChEMBL
  • ChEMBL1909057 ☒N
ChemSpider
  • 144499 checkY
ECHA InfoCard 100.013.882 Edit this at Wikidata
EC Number
  • 215-269-1
  • 14829
RTECS number
  • GL7900000
UNII
  • V1XJQ704R4 checkY
  • DTXSID5034488 Edit this at Wikidata
  • InChI=1S/Cu.O/q+2;-2 checkY
    Key: KKCXRELNMOYFLS-UHFFFAOYSA-N checkY
  • InChI=1/Cu.O/rCuO/c1-2
    Key: QPLDLSVMHZLSFG-PHEGLCPBAN
  • InChI=1/Cu.O/q+2;-2
    Key: KKCXRELNMOYFLS-UHFFFAOYAT
  • [Cu]=O
  • [Cu+2].[O-2]
Properties
CuO
Molar mass 79.545 g/mol
Appearance black to brown powder
Density 6.315 g/cm3
Melting point 1,326 °C (2,419 °F; 1,599 K)
Boiling point 2,000 °C (3,630 °F; 2,270 K)
insoluble
Solubility soluble in ammonium chloride, potassium cyanide
insoluble in alcohol, ammonium carbonate
Band gap 1.2 eV
+238.9·10−6 cm3/mol
2.63
Structure
monoclinic, mS8[1]
C2/c, #15
a = 4.6837, b = 3.4226, c = 5.1288
α = 90°, β = 99.54°, γ = 90°
Thermochemistry
43 J·mol−1·K−1
−156 kJ·mol−1
Hazards
GHS labelling:
GHS09: Environmental hazard
Warning
H410
P273, P391, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 0: Will not burn. E.g. waterInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
2
0
1
Flash point Non-flammable
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 1 mg/m3 (as Cu)[2]
REL (Recommended)
TWA 1 mg/m3 (as Cu)[2]
IDLH (Immediate danger)
TWA 100 mg/m3 (as Cu)[2]
Safety data sheet (SDS) Fisher Scientific
Related compounds
Other anions
Copper(II) sulfide
Other cations
Nickel(II) oxide
Zinc oxide
Related compounds
Copper(I) oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Production edit

It is produced on a large scale by pyrometallurgy, as one stage in extracting copper from its ores. The ores are treated with an aqueous mixture of ammonium carbonate, ammonia, and oxygen to give copper(I) and copper(II) ammine complexes, which are extracted from the solids. These complexes are decomposed with steam to give CuO.

It can be formed by heating copper in air at around 300–800 °C:

2 Cu + O2 → 2 CuO

For laboratory uses, pure copper(II) oxide is better prepared by heating copper(II) nitrate, copper(II) hydroxide, or basic copper(II) carbonate:[4]

2 Cu(NO3)2(s) → 2 CuO(s) + 4 NO2(g) + O2(g) (180°C)
Cu2(OH)2CO3(s) → 2 CuO(s) + CO2(g) + H2O(g)
Cu(OH)2(s)CuO(s) + H2O(g) [5]

Reactions edit

Copper(II) oxide dissolves in mineral acids such as hydrochloric acid, sulfuric acid or nitric acid to give the corresponding copper(II) salts:[4]

CuO + 2 HNO3 → Cu(NO3)2 + H2O
CuO + 2 HCl → CuCl2 + H2O
CuO + H2SO4 → CuSO4 + H2O

In presense of water It reacts with concentrated alkali to form the corresponding cuprate salts:

2 MOH + CuO + H2O → M2[Cu(OH)4]
2 NaOH + CuO + H2O → Na2[Cu(OH)4]

It can also be reduced to copper metal using hydrogen, carbon monoxide, or carbon:

CuO + H2 → Cu + H2O
CuO + CO → Cu + CO2
2 CuO + C → 2Cu + CO2

When cupric oxide is substituted for iron oxide in thermite the resulting mixture is a low explosive, not an incendiary.

Structure and physical properties edit

Copper(II) oxide belongs to the monoclinic crystal system. The copper atom is coordinated by 4 oxygen atoms in an approximately square planar configuration.[1]

The work function of bulk CuO is 5.3 eV[6]

Uses edit

As a significant product of copper mining, copper(II) oxide is the starting point for the production of other copper salts. For example, many wood preservatives are produced from copper oxide.[3]

Cupric oxide is used as a pigment in ceramics to produce blue, red, and green, and sometimes gray, pink, or black glazes.

It is incorrectly used as a dietary supplement in animal feed.[7] Due to low bioactivity, negligible copper is absorbed.[8]

It is used when welding with copper alloys.[9]

A copper oxide electrode formed part of the early battery type known as the Edison–Lalande cell. Copper oxide was also used in a lithium battery type (IEC 60086 code "G").

Pyrotechnics and fireworks edit

Used as moderate blue coloring agent in blue flame compositions with additional chlorine donors and oxidizers such as chlorates and perchlorates. Providing oxygen it can be used as flash powder oxidizer with metal fuels such as magnesium, aluminium, or magnalium powder. Sometimes it is used in strobe effects and thermite compositions as crackling stars effect.

Similar compounds edit

An example of natural copper(I,II) oxide is the mineral paramelaconite, Cu+2Cu2+2O3.[10][11]

See also edit

References edit

  1. ^ a b The effect of hydrostatic pressure on the ambient temperature structure of CuO, Forsyth J.B., Hull S., J. Phys.: Condens. Matter 3 (1991) 5257–5261, doi:10.1088/0953-8984/3/28/001. Crystallographic point group: 2/m or C2h. Space group: C2/c. Lattice parameters: a = 4.6837(5), b = 3.4226(5), c = 5.1288(6), α = 90°, β = 99.54(1)°, γ = 90°.
  2. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0150". National Institute for Occupational Safety and Health (NIOSH).
  3. ^ a b Richardson, H. Wayne (2002). "Copper Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a07_567. ISBN 978-3527306732.
  4. ^ a b O. Glemser and H. Sauer (1963). "Copper, Silver, Gold". In G. Brauer (ed.). Handbook of Preparative Inorganic Chemistry, 2nd Ed. Vol. 1. NY, NY: Academic Press.
  5. ^ Cudennec, Yannick; Lecerf, André (November 2003). "The transformation of Cu(OH)2 into CuO, revisited" (PDF). Solid State Sciences. 5 (11–12): 1471–1474. Bibcode:2003SSSci...5.1471C. doi:10.1016/j.solidstatesciences.2003.09.009. S2CID 96363475.
  6. ^ F. P. Koffyberg and F. A. Benko (1982). "A photoelectrochemical determination of the position of the conduction and valence band edges of p-type CuO". J. Appl. Phys. 53 (2): 1173. Bibcode:1982JAP....53.1173K. doi:10.1063/1.330567.
  7. ^ "Uses of Copper Compounds: Other Copper Compounds". Copper Development Association. 2007. Archived from the original on 2013-08-15. Retrieved 2007-01-27.
  8. ^ Cupric Oxide Should Not Be Used As a Copper Supplement for Either Animals or Humans, Baker, D. H., J. Nutr. 129, 12 (1999) 2278-2279
  9. ^ "Cupric Oxide Data Sheet". Hummel Croton Inc. 2006-04-21. Archived from the original on 2011-07-07. Retrieved 2007-02-01.
  10. ^ "Paramelaconite".
  11. ^ "List of Minerals". 21 March 2011.

External links edit

  • National Pollutant Inventory - Copper and compounds fact sheet
  • Copper oxides project page Archived 2011-07-25 at the Wayback Machine
  • CDC - NIOSH Pocket Guide to Chemical Hazards