Jet 14

Summary

The Jet 14 is an American sailing dinghy that was designed by Howard Siddons as a one-design racer and first built in 1952.[1][2]

Jet 14
Development
DesignerHoward Siddons
LocationUnited States
Year1952
No. built1,000
Builder(s)Siddons & Sindle, Allen Boat Company
RoleOne-design racer
NameJet 14
Boat
Displacement285 lb (129 kg)
Draft4.17 ft (1.27 m) with centerboard down
Hull
TypeMonohull
ConstructionFiberglass
LOA14.00 ft (4.27 m)
LWL13.92 ft (4.24 m)
Beam4.67 ft (1.42 m)
Hull appendages
Keel/board typecenterboard daggerboard
Rudder(s)transom-mounted rudder
Rig
Rig typeBermuda rig
J foretriangle base16.58 ft (5.05 m)
E mainsail foot8.37 ft (2.55 m)
Sails
SailplanFractional rigged sloop Masthead sloop
Mainsail area75 sq ft (7.0 m2)
Jib/genoa area38 sq ft (3.5 m2)
Spinnaker area150 sq ft (14 m2)
Total sail area113 sq ft (10.5 m2)
Racing
D-PN97.6

The Jet 14 is a development of Uffa Fox's International 14.[1][3]

Production edit

Siddons used a set of early International 14 molds that he had acquired to create the Jet 14 hull shape, with a partial foredeck added. It was initially intended to be sailed as a catboat with just a mainsail or as a sloop, with a jib, but these days is only sailed as a sloop.[1]

The design was initially built by Siddons & Sindle in Island Heights, New Jersey, United States, but the company went out of business and production was assumed by the Allen Boat Company of Buffalo, New York, who still produce it. A total of 1,000 boats have been built.[1][2][4][5]

Design edit

The Jet 14 is a recreational sailboat, with the early boats built predominantly of wood and later boats constructed of fiberglass, with wood trim. It has a fractional sloop rig with wooden or aluminum spars. The hull has a plumb stem, a vertical transom, a transom-hung rudder controlled by a tiller and a retractable centerboard. It displaces 285 lb (129 kg).[1][2]

The boat has a draft of 4.17 ft (1.27 m) with the centerboard extended and 4 in (10 cm) with it retracted, allowing beaching or ground transportation on a trailer or car roof rack.[1]

For sailing the design is equipped with either a mainsheet traveler or a headknocker cleat mounted on the boom. The class rules were amended to allow spinnakers in 1971 and many boats have cutouts in the foredeck for spinnaker stowage, either a single cutout near the bow of one on each side of the mast. The boat's class rules restrict the cutout sizes. The design is often sailed with the spinnaker and jib hoisted unless in very light winds.[2]

The class rules permit a lever-style boom vang and a jib window for visibility. The rules require buoyancy to be added to the wooden boats, while the fiberglass ones have built-in buoyancy tanks that make them unsinkable.[2]

The design has a Portsmouth Yardstick racing average handicap of 97.6 and is normally raced with a crew of two sailors.[2]

Operational history edit

There are fleets sailed in New York state, New Jersey, Maryland and Ohio.[2]

In a 1994 review Richard Sherwood wrote, "The Jet 14 ... is fast, going well to windward. The long flat run of the hull and the light weight allow her to plane."[2]

See also edit

References edit

  1. ^ a b c d e f McArthur, Bruce (2020). "Jet 14 sailboat". sailboatdata.com. Archived from the original on 11 July 2020. Retrieved 9 July 2020.
  2. ^ a b c d e f g h Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 40-41. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
  3. ^ McArthur, Bruce (2020). "Uffa Fox". sailboatdata.com. Archived from the original on 15 January 2020. Retrieved 19 July 2020.
  4. ^ McArthur, Bruce (2020). "Siddons & Sindle (USA)". sailboatdata.com. Archived from the original on 19 July 2020. Retrieved 9 July 2020.
  5. ^ McArthur, Bruce (2020). "Allen Boat Co. (USA)". sailboatdata.com. Archived from the original on 11 July 2020. Retrieved 9 July 2020.

External links edit

  • Official website