In Euclidean geometry, an orthodiagonal quadrilateral is a quadrilateral in which the diagonals cross at right angles. In other words, it is a four-sided figure in which the line segments between non-adjacent vertices are orthogonal (perpendicular) to each other.
A kite is an orthodiagonal quadrilateral in which one diagonal is a line of symmetry. The kites are exactly the orthodiagonal quadrilaterals that contain a circle tangent to all four of their sides; that is, the kites are the tangential orthodiagonal quadrilaterals.
A square is a limiting case of both a kite and a rhombus.
Orthodiagonal equidiagonal quadrilaterals in which the diagonals are at least as long as all of the quadrilateral's sides have the maximum area for their diameter among all quadrilaterals, solving the n = 4 case of the biggest little polygon problem. The square is one such quadrilateral, but there are infinitely many others. An orthodiagonal quadrilateral that is also equidiagonal is a midsquare quadrilateral because its Varignon parallelogram is a square. Its area can be expressed purely in terms of its sides.
This follows from the Pythagorean theorem, by which either of these two sums of two squares can be expanded to equal the sum of the four squared distances from the quadrilateral's vertices to the point where the diagonals intersect. Conversely, any quadrilateral in which a2 + c2 = b2 + d2 must be orthodiagonal. This can be proved in a number of ways, including using the law of cosines, vectors, an indirect proof, and complex numbers.
According to another characterization, the diagonals of a convex quadrilateral ABCD are perpendicular if and only if
where P is the point of intersection of the diagonals. From this equation it follows almost immediately that the diagonals of a convex quadrilateral are perpendicular if and only if the projections of the diagonal intersection onto the sides of the quadrilateral are the vertices of a cyclic quadrilateral.
A convex quadrilateral is orthodiagonal if and only if its Varignon parallelogram (whose vertices are the midpoints of its sides) is a rectangle. A related characterization states that a convex quadrilateral is orthodiagonal if and only if the midpoints of the sides and the feet of the four maltitudes are eight concyclic points; the eight point circle. The center of this circle is the centroid of the quadrilateral. The quadrilateral formed by the feet of the maltitudes is called the principal orthic quadrilateral.
If the normals to the sides of a convex quadrilateral ABCD through the diagonal intersection intersect the opposite sides in R, S, T, U, and K, L, M, N are the feet of these normals, then ABCD is orthodiagonal if and only if the eight points K, L, M, N, R, S, T and U are concyclic; the second eight point circle. A related characterization states that a convex quadrilateral is orthodiagonal if and only if RSTU is a rectangle whose sides are parallel to the diagonals of ABCD.
There are several metric characterizations regarding the four triangles formed by the diagonal intersection P and the vertices of a convex quadrilateral ABCD. Denote by m1, m2, m3, m4 the medians in triangles ABP, BCP, CDP, DAP from P to the sides AB, BC, CD, DA respectively. If R1, R2, R3, R4 and h1, h2, h3, h4 denote the radii of the circumcircles and the altitudes respectively of these triangles, then the quadrilateral ABCD is orthodiagonal if and only if any one of the following equalities holds:
Furthermore, a quadrilateral ABCD with intersection P of the diagonals is orthodiagonal if and only if the circumcenters of the triangles ABP, BCP, CDP and DAP are the midpoints of the sides of the quadrilateral.
A few metric characterizations of tangential quadrilaterals and orthodiagonal quadrilaterals are very similar in appearance, as can be seen in this table. The notations on the sides a, b, c, d, the circumradii R1, R2, R3, R4, and the altitudes h1, h2, h3, h4 are the same as above in both types of quadrilaterals.
|Tangential quadrilateral||Orthodiagonal quadrilateral|
The area K of an orthodiagonal quadrilateral equals one half the product of the lengths of the diagonals p and q:
Conversely, any convex quadrilateral where the area can be calculated with this formula must be orthodiagonal. The orthodiagonal quadrilateral has the biggest area of all convex quadrilaterals with given diagonals.
For a cyclic orthodiagonal quadrilateral (one that can be inscribed in a circle), suppose the intersection of the diagonals divides one diagonal into segments of lengths p1 and p2 and divides the other diagonal into segments of lengths q1 and q2. Then (the first equality is Proposition 11 in Archimedes Book of Lemmas)
or, in terms of the sides of the quadrilateral, as
It also follows that
Thus, according to Euler's quadrilateral theorem, the circumradius can be expressed in terms of the diagonals p and q, and the distance x between the midpoints of the diagonals as
A formula for the area K of a cyclic orthodiagonal quadrilateral in terms of the four sides is obtained directly when combining Ptolemy's theorem and the formula for the area of an orthodiagonal quadrilateral. The result is: p.222
For every orthodiagonal quadrilateral, we can inscribe two infinite sets of rectangles: