Sometimes, a tree on your property just has to go. Whether it’s growing
dangerously close to a power line, is dead, or is simply in the way, if
you’re handy and have the right tools, you can likely cut down a tree
yourself if you plan carefully, follow all safety precautions, and keep
these three things in mind.
Triple Check for Safety
Safety is your top priority. You should carefully and thoroughly assess
the situation before you fire up your chainsaw. Make sure that there
aren’t any power lines in the path of the fall or any structures that
could be damaged. You also need to plan your escape routes. Once the
tree starts falling, you need a clear path to safety, and it’s best to
have a few options just in case. If you start having second thoughts at
any point during this process, there’s nothing wrong with calling up an
expert to take a look. But if everything checks out, you can move on to
the next steps.
Make Sure You Have the Tools for the Job
As with any DIY project, you need the right tools for the job. For many people, that means a chainsaw and then a battery hedge trimmer
to help them take care of excess branches or general foliage. While you
could try to chop the tree down with an ax or a manual saw, a battery
chainsaw will make the process substantially faster without using nearly
as much energy. Look for one from a reputable company that offers the
power and performance you need to get through the tree.
Learn How to Cut a Notch and Felling Cut
Chopping down a tree might seem straightforward, but you need to know
the proper technique if you want good results. The most common method of
cutting down a tree is with a notch and a felling cut. This allows the
tree to fall more predictably and safely as opposed to just any which
way. Using your battery chainsaw,
start by cutting the notch into the trunk of the tree. This approach
involves two cuts. The first cut should be at a 45-degree angle sloping
downward. Stop once you get about a third of the way through the trunk.
The second is a horizontal cut that should meet the first one and form a
point.
After that, move to the other side of the trunk and make
your felling cut. This is the one that will bring the tree down. Start
about an inch or so above the notch and cut mostly through the trunk.
You want to stop before reaching the notch to create a hinge. Once
there, take one of your paths to safety and yell timber. Once the tree
has fallen, you can begin removing branches and chopping the log into
smaller pieces.
About Greenworks Tools
Whether
you’re a homeowner, DIYer, or professional landscaper, Greenworks Tools
offers what you need to get your next task done. This brand specializes
in electric outdoor tools, offering everything from a cordless leaf blower
to a 2000 PSI pressure washer. Their line of lawn mowers, pressure
washers, hedge trimmers, and other essentials will help you breeze
through your to-do list, with comparable power and performance to
gas-powered alternatives. The best part is you can forget all about the
gasoline spills and smells, deafening noise, and general hassle of using
gas-powered tools. Whether you’re trimming the lawn, washing the
driveway, or chopping down a tree, count on Greenworks Tools to help you
get the job done.
Find your electric chainsaw from Greenworks Tools at https://www.greenworkstools.com/
Original Source: https://bit.ly/3C470SQ
Chopping Down Your First Tree? Keep These 3 Things in Mind
0 Comments
COMMENT