10 quick solutions for CCTV Camera water condensation

For IP CCTV system, Analog camera, POE Camera or Wi-Fi Camera. The problem you are facing is that the camera has water condensation and the resulting image is very blurry and this problem should be solved quick decision. In addition, it can even corrode your outdoor CCTV cameras and lead to your camera being permanently damaged if you don't get an effective solution in time.

To prevent CCTV security cameras from fogging, we have collected the top 10 and most practical solutions for you to remove water condensation from your IP security cameras, Analog cameras, POE cameras or Wi-Fi cameras.

The content of the article is compiled from reliable sources, from FPTC's techniques and users who have successfully handled:

·         The reason why CCTV cameras have water condensation

·         How to remove water condensation in CCTV security cameras

·         3 solutions to prevent fog on CCTV security cameras

·         How to prevent water condensation on CCTV security cameras

 

The reason why CCTV cameras have water condensation?

Factor 1. Security cameras are not perfectly sealed

A major cause of water condensation in security cameras is that the equipment is not well sealed or even unqualified. For example, some outdoor CCTV cameras do not meet the waterproof standard required by the customer.

With low-quality, dubious CCTV security cameras installed outdoors, you are more likely to encounter water condensation problems than using qualified cameras from trusted security camera brands.

 

2. There is a large daily temperature variation

Condensation inside the security camera occurs when moist air meets the cold surface of the security camera, especially if there is a large temperature fluctuation within a day. In Vietnam, this problem is really big when the temperature is often erratic, unstable, and the air humidity is HIGH.

In general, your security cameras will experience water condensation during the late summer and fall, so you need to pay attention to deal with related problems.

 

Factor 3. CCTV cameras are constantly exposed to extreme weather conditions

Improper installation points are also a big problem with water condensation in CCTV cameras, even for qualified waterproof security cameras.

For example, if your CCTV cameras are continuously exposed to heavy rain, storms and other extreme weather conditions without shelter, they may not be able to resist water ingress over time and eventually also lead to a blurry image.

 

Factor 4. CCTV cameras can only be used indoors but installed outdoors

Another possible reason why security cameras are dim is that you might misplace indoor CCTV for outdoor use.

So, to avoid security camera condensation, it is best to use outdoor CCTV cameras according to good waterproof standards. Do not use the indoor camera for outdoor installation.

 

How to remove water condensation from CCTV: top 7 solutions

With water condensation inside the security camera, if you do not deal with it soon, there is a risk that the camera will be completely damaged and cannot be repaired. In order to avoid fogging on outdoor security cameras, please refer to some of the optimal solutions FPT Camera has done and experimented with during the installation of the CCTV system that we have done.

 

Solution 1. Wipe off condensation in CCTV security cameras with microfiber cloth

To remove water condensation in security cameras, you can simply wipe the outer lens caps with a microfiber cloth, which will not leave any water spots.

Another possible way to get the steam out of the security camera is to use a hair dryer to gently heat it up and the water condensation on the security camera will disappear soon.

 

Solution 2. Apply water-proof paint spray on the CCTV camera housing

In case water condensation problems in security cameras occur frequently, it is best to apply a waterproof spray on the outer lens cap.

By using water-resistant paint spray on the CCTV camera housing regularly, you can protect your outdoor security cameras from condensation problems.

 

Solution 3. Put the security camera in the waterproof case

The waterproof box is a possible solution to deal with condensation in CCTV cameras, especially in areas where heavy rain and violent storms are frequent.

And don't forget ventilation: Drill a hole in the boxes and cover the hole with water-resistant material.

 

Solution 4. Remove the security camera & clean the condensate inside

If there is condensation inside the dome security camera, it is best to take outdoor CCTV cameras from the installation locations and bring them indoors for treatment.

You can then use a microfiber cloth or hair dryer to carefully wipe off the steam. After using such tools, there should be no water stains on the surface of the lens cap for the best performance of the dome security camera.

 

Solution 5. Add gel/desiccant bag to outdoor CCTV

To prevent security cameras from being blurred at night due to water vapor or fog, another good solution is to place a small desiccant pack inside the outdoor CCTV cameras.

Such desiccant packs are capable of removing moisture and drying the air and thus your camera will avoid water condensation problems.

 

Solution 6. Install heater/blower in outdoor CCTV

In addition to the desiccant pack, you can also add a heater or blower for the outdoor security camera to prevent condensation.

However, professional knowledge and skills are essential to get this job done. So you should only add heaters to your security cameras if you have a good understanding of electronics.

 

Solution 7. Contact Customer Support

In addition to dealing with water condensation in dome security cameras, you can also contact customer support for help.

Professional support teams from trusted security camera brands like Hikvision, Dahua will help you find the cause and guide you on how to get rid of water condensation in security cameras in effective ways.

 

3 useful tips to prevent water condensation in CCTV cameras

 

To prevent your outdoor CCTV camera from getting blurry, it's best to follow some TIPS that FPT Camera techniques have successfully done.

Tip 1. Choose Security Cameras from top rated brands like Hikvision, Dahua, CP Plus, AvTech, Uniview etc.

When buying security cameras online or from local distributors, it's best to look at top security camera brands. These brands usually have a high reputation for their quality products and outstanding customer service, such as a responsive support team, long warranty periods, etc.

So, when you encounter water condensation problems in your security cameras, you will have your problems resolved with the help of professional support teams without spending a dime.

 

Tip 2. Take a closer look at the Security Camera quality and its Temperature and Humidity recommendations.

Before testing, you can take a look at the temperature and humidity resistant security camera within the limits it can work well, especially if you live in a high temperature, high cold area.

 

Tip 3. Be cautious when choosing CCTV Mounting Point.

Even if you have purchased a waterproof security camera, you still have to be careful when choosing the right installation locations.

When outdoor CCTV cameras are exposed to direct sunlight or all weather conditions without shelter, the possibility of security camera condensation problems will appear to a large extent.

 

CCTV Security Camera FAQ’s

Q. What is CCTV Security Camera?

Ans: CCTV, or (Closed-Circuit-Television), is a system which permits you to keep an eye on what is going on in and around your properties. CCTV Cameras and monitors allow you to view live details of your selected area, and recorders record footage for later reference.

Q. What is IP CCTV Camera?

Ans: An Internet Protocol camera, or IP camera, is a type of digital video camera that receives control data and sends image data via an IP network. They are commonly used for surveillance but unlike analog closed-circuit television (CCTV) cameras, they require no local recording device, only a local area network.

Q. What is an IP camera used for?

Ans: An internet protocol (IP) camera lets you monitor your home or business using software that connects it directly to the internet. Unlike a webcam, it doesn't need a computer to transmit video online.

Q. What is the difference between an IP camera and CCTV?

Ans: IP camera is a type of digital video camera used for surveillance which transmits data via a network Ethernet link. CCTV Camera is a type of digital video camera used for surveillance which transmits a signal for observation on monitor.

Q. Do security cameras record all of the time?

Ans: CCTV Security cameras may be set to record continuously, according to a schedule, or when motion is detected.  This can easily be adjusted inside the camera's settings. Keep in mind, if your smartphones are set to record continuously, they'll take up more storage space and so allows for shorter historical records. Also, if the cameras are battery-powered, it might significantly shorten the battery life to maintain continuous recording mode.

Q. Where is the best place to put an outdoor CCTV Camera?

Ans: We commonly put security cameras at the corners of your house under the soffit.  This generates better observing angles and tamper prevention.

Q. Is there a CCTV Camera that works without Wi-Fi?

Ans: Of course, the most of Digital (HD) High-Definition cameras still rely on wires.

Q. What internet speed do you need for CCTV Cameras?

Ans: At least 10Mb/s. needs to view them online

Q. Are Wi-Fi CCTV Camera reliable?

Ans: Wi-Fi cameras are reliable, though less than wired cameras.  They also typically have poorer image quality for the same cost.  This is a result of potential interference from radio interference, your home's walls or the space from the Wi-Fi.

Q. How far can you run IP cameras?

Ans: There isn't a specific maximum distance for an IP camera run.  The number varies depending on the network speed. As a general guideline, using a cat5 or cat6 cable, 328-foot (100 meters) limitation.  If necessary, there are ways to expand this limitation.  The most frequent way of doing this is by installing extra network buttons before the 100-meter limit.  Another choice is to use an Ethernet Extender.  All these are useful in circumstances where adding a switch is not possible.



0 Comments

Curated for You

Popular

Top Contributors more

Latest blog